Sanyo Projector Plc Xu87 User Manual

11
Part Names and Functions
ON - OFF
POWER
AUTO SET UP
INPUT
W ARNINGLAMP REPLACE
MENU
- VOLUME + VOLUME
SELECT
qwetui
o
u LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end.  (pp.58, 61)
y WARNING indicatorEmit a red light when the projector detects 
abnormal condition.  This also blinks red when the
internal temperature of the projector exceeds the
operating range.  (pp.56, 61)
w POWER ON–OFF buttonTurn the projector on or off.  (pp.21, 22)
r POWER indicatorEmit a...

To ensure safe operation, please
observe the following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do not
apply benzene, thinner, splay, or any
chemical material.
Remote Control
q
12
Pa rt Names and Functions
i
r
! 5
!1
@0
t
@1
!8
we
o
!0
!4
@3
!7
y
u
!2
!3
!9
@4
@2
!6
wPOWER ON-OFF button 
Turn the projector on or off.  (pp.21, 22)
rVIDEO button
Select the VIDEO input source.  (p.38)
tCOMPUTER button
Select the COMPUTER input...

13
Part Names and Functions
Spotlight
Pointer Function
Pointer
Laser Light Window
Signal Emission Indicator
Laser Pointer Function
LASER button
PRESENTATION POINTER
button
MENU button
NO SHOW button
This remote control emits a laser beam from the laser light window. Pres\
s the LASER button to activate the
laser pointer. The signal emission indicator lights red and the red lase\
r beam is emitted. If the LASER button is
pressed for more than one minute or if it is released, the laser light g\
oes off....

PRESENTATION POINTER
button
R-CLICK button
L-CLICK buttonWhile pressing the MENU
button, press the IMAGE
button number of times
corresponding to the
remote control code. 
MENU button
IMAGE button
RESET/ON/ALL-OFF
switch
Remote Control Code
Remote Control CodeNumber of TimesPressing IMAGE Button
Code 1 1
Code 2 2
Code 33
Code 44
Code 55
Code 66
Code 77
Code 88
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer. Be\
fore operating the wireless mouse,
connect your...

15
Part Names and Functions
A djustable Feet
To insure safe operation, please observe the following precautions :
●Use two (2) AAA or LR03 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked on the remote control, carefully wipe the case\
 clean and install new batteries.
● Risk of an explosion...

Positioning the Projector
For projector positioning, see the figures below. The projector should b\
e set perpendicularly to the plane of the
screen.
✔Notes:
• The brightness in the room has a great influence on picture quality. It \
is recommended to limit ambient lighting in order to o btain
the best image.
• All measurements are approximate and may vary from the actual sizes.
16
Installation
USB
 A
B
100  150
 200

192
128 
96 
64  300
	XJEF

40 
300 	UFMF

43.0 (13.1m)
27.5 (8.4m)
18.4...

17
Installation
ON
ON
S-VIDEO IN  COMPUTER / COMPONENTAUDIO  IN
R
VIDEO INL(MONO)
(VARIABLE)
AUDIO  OUTCOMPUTER  IN  1DVI-IUSBSERVICE PORT MONITOR  OUT
COMPUTER IN 2 
/ COMPONENT IN
Cables used for connection 
• VGA Cable (Mini D-sub 15 pin)  ✽
• DVI Cable  ✽
• DVI-VGA Cable 
• USB Cable 
• Audio Cables  ✽
( ✽ = Not supplied with this projector.)
External Audio Equipment
DVI-VGA
cable  
DVI
cable 
✽
USB cable 
Audio cable
(stereo)  ✽
Audio cable ✽
(stereo)
Monitor Output
or
Monitor Input
USB port
Audio...

18
Installation
S-VIDEO IN  COMPUTER / COMPONENTAUDIO  IN
R
VIDEO INL(MONO)
(VARIABLE)
AUDIO  OUTUSBSERVICE PORT MONITOR  OUT
COMPUTER IN 2 
/ COMPONENT INCOMPUTER  IN  1DVI-I
Cables used for connection  
• Video and Audio Cable (RCA x 3)  ✽
• S-VIDEO Cable  ✽
• Audio Cable  ✽
( ✽  = Not supplied with this projector.)
External Audio Equipment
Audio cable  ✽
(stereo)
VIDEO IN
S-VIDEO
S-video cable 
✽
Video and audio cable ✽
Composite Video and Audio Output
S-video Output
AUDIO IN Audio Input
AUDIO OUT...

19
Installation
S-VIDEO IN  COMPUTER / COMPONENTAUDIO  IN
R
VIDEO INL(MONO)
(VARIABLE)
AUDIO  OUTUSBSERVICE PORT MONITOR  OUT
COMPUTER IN 2 
/ COMPONENT INCOMPUTER  IN  1DVI-I
Cables used for connection
• Audio Cables  ✽
• Scart-VGA Cable  ✽
• Component Cable  ✽
• Component-VGA Cable  ✽
( ✽ = Not supplied with this projector.)  
External Audio Equipment
COMPUTER/
COMPONENT
AUDIO IN
Audio cable  ✽
(stereo)
Audio cable 
✽
(stereo)
Audio Input
Component Video Output
(Y, Pb/Cb, Pr/Cr)
RGB Scart 21-
pin...

20
InstallationConnecting the AC Power Cord
NOTE ON THE POWER CORD
AC power cord must meet the requirements of the country where you use th\
e projector.
Confirm the AC plug type with the chart below and proper AC power cord m\
ust be used.
If supplied the AC power cord does not match your AC outlet, contact you\
r sales dealer.
To power cord 
connector on your
projector.
Projector sideAC outlet side
Ground
To the AC outlet.
(120 V AC)
For Continental EuropeFor the U.S.A. and Canada
This projector uses...