Sanyo Projector Plc Xu75 User Manual

Multimedia Projector
MODEL PLC-XU75
Owner's Manual
PLC-XU78 

Table of Contents

Features and Design
This  Multimedia  Projector  is  designed  with  the  most  advanced  technology  for  portability,  durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
◆ Compact Design
 
This  projector  is  designed  compact  in  size 
and  weight.  It  is  easy  to  carry  and  work anywhere you wish to use.
◆ Compatibility
 
The  projector  widely  accepts...

Table of ContentsFeatures and Design
3
TrademarksEach name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.
Features and Design   .  .  .  .  .  .  .  .  .  .  .  .  .2
Table of Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Air Circulation  6
Installing the Projector in Proper...

Safety Instructions
4
To the Owner
Before  operating  this  projector,  read  this  manual thoroughly and operate the projector properly.This projector provides many convenient features and functions.    Operating  the  projector  properly  enables you  to  manage  those  features  and  maintains  it  in better condition for a considerable time.Improper  operation  may  result  in  not  only  shortening the  product-life,  but  also  malfunctions,  fire  hazard,  or other accidents.I f  y o u r  p r o j...

5
All the safety and operating instructions should be read before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them for  later  use.    Unplug  this  projector  from  AC  power supply  before  cleaning.  Do  not  use  liquid  or  aerosol cleaners.  Use a damp cloth for cleaning.
Follow  all  warnings  and  instructions  marked  on  the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long...

ComplianceSafety Instructions
6
Openings  in  the  cabinet  are  provided  for  ventilation and  to  ensure  reliable  operation  of  the  product  and  to protect  it  from  overheating,  and  these  openings  must not be blocked or covered. 
 CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.    When u s i n g  o r  i n s t a l l i n g  t h e  p r o j e c t o r,  t h e  f o l l o w i n g precautions should be taken. 
–  Do  not  put  any  flammable  object  or  spray  can 
near  the...

ComplianceSafety Instructions
7
Federal Communications Commission NoticeNote:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses,  and  can  radiate  radio frequency  energy,  and  if  not  installed  and  used  in  accordance...



Part Names and FunctionsPart Names and Functions
qtyerw
Front
Bottom
q	Infrared Remote Receiver
w	Zoom Ring
e	Projection Lens
r	Focus Ring
t Lens Cover	
	 (See
	
page
	
53 	 for 	 attaching.)
y	Air Intake Vent
u	Power Cord Connector
i	Speaker
o	Terminals and Connectors
!0	Top Controls and Indicators
!1	Exhaust Vents
 CAUTION
Hot	 air 	 is 	 exhausted 	 from 	 the 	 exhaust 	 vent. 	 Do 	
not 	 put 	 heat-sensitive 	 objects 	 near 	 this 	 side.
!2	Lamp Cover
!3	Air Intake Vents (back and...


9
Part Names and FunctionsPart Names and Functions
Rear Terminal
e COMPUTER IN 2 / MONITOR OUT
 
T h i s  t e r m i n a l  i s  s w i t c h a b l e  a n d  c a n  b e 
used  for  input  from  a  computer  or  output t h e  i n c o m i n g  R G B  a n a l o g  s i g n a l  f r o m C O M P U T E R   I N 1 / C O M P O N E N T     I N terminal to the other monitor.
 
S e t  t h e  t e r m i n a l  u p  a s  e i t h e r  C o m p u t e r 
i n p u t  o r  M o n i t o r  o u t p u t  p r o p e r l y.  ( U...

10

Top Control
t LAMP REPLACE indicator
 
Turn  yellow  when  the  life  of  the  projection 
lamp draws to an end. (p.55, 61)
y	WARNING Temp  .  indicator
 
Emit  a  red  light  when  the  projector  detects 
an  abnormal  condition.    This  also  blinks red  when  the  internal  temperature  of  the p r o j e c t o r  e x c e e d s  t h e  o p e r a t i n g  r a n g e . 
(p.5  , 61)
u POWER ON/STAND-B y  button
  Turn the projector on or off. (p.18, 19)
r POWER indicator
 
E m i t  a  r e d  l...