Sanyo Projector Plc Xu111 User Manual

Multimedia Projector
MODELPLC-XU111
PLC-XU111K
Owner’s Manual
Network Supported
❏Wireless LAN
IEEE802.11b/g
❏ Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏   USB Memory Viewer (optionally available)
Compatible with a dedicated USB memory
✽ Refer to the owner’s manuals below for details about
network and memory viewer function. ■ Network Set-up and Operation
■ Owners Manual  USB Memory 
This manual is provided with optionally supplied
USB memory. 

2 

3
Features and Design
◆Compact Design
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to
use.
◆Capable of 360-degree Projection
This projector is capable of 360-degree projection.
*Some restriction required, see page 8.
◆Antitheft Alarm Function
This projector is equipped with an Antitheft alarm
function which sounds when vibration is detected
(pp.58–61). A built-in rechargeable battery is used for
the alarm.
◆Simple Computer System Setting
The...

4
Table of Contents
Trademarks
Each name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective
corporation.
F eatures and Design  . . . . . . . . . . . . . . . .3
T able of Contents  . . . . . . . . . . . . . . . . . .4
To  the Owner  . . . . . . . . . . . . . . . . . . . . . .5
Safety Instructions  . . . . . . . . . . . . . . . . .6
Air Circulation 7
Moving the Projector 7
Installing the Projector in Proper Directions 8
Compliance  . . . . . . . . ....

5
To the Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
Before installing and operating...

6
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time,...

7
Safety Instructions
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered. 
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken. 
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any...

8
Safety Instructions
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture upward, downward, or backward, pe\
rpendicular to the plane of the screen
as shown in the figure below.
Bottom
Downward (Usual)Front
DownwardBottom
UpwardFront
Upward
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
Po sitioning...

9
Compliance
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, th\
e value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse\
 must be used of the same rating, marked thus
. If the fuse cover is detachable, never use the plug with the cover omi\
tted. If a replacement fuse cover is required,
ensure it is of the same colour as that visible on the pin face of the p\
lug (i.e. red or...

10
Bottom Back
qZoom Ring
w Infrared Remote Receiver
e Focus Ring
r Projection Lens
t Slide Shutter Lever
y Top Controls and Indicators
u Exhaust Vent
i
!6
!3
!5!4
!1!2
CAUTION
Hot air is exhausted from the exhaust
vents. Do not put heat-sensitive objects
near this side.
erty
Fr ont
Pa rt Names and Functions
! 7
!0o
qw
✔Note:
• ! 2USB Terminal and  !3LAN Connection
Terminal are for the Network function. Refer
to the owner’s manual “Network Set-up and
Operation” and owner’s manual of Memory
viewer...