Sanyo Projector Plc Xtc50l User Manual

71
Menu Tree
Dynamic
RealCinema*Image 1Image 2Image 3
Image
Input
Go to System (3)
Go to System (3)
Video 
Go to System (1)
S-video
Standard
Quit
Input 1
Go to System (3)Video
Go to System (1)Input 2 RGB
Go to System (2)Component
Image 4
RGB (PC analog)
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Quit
Quit
SySTEM (3)SySTEM (1)
- - - -
Mode 1
Mode 2
XGA 1SECAM
NTSC
Auto
PAL
PAL-M
PAL-N
NTSC4.43
SySTEM (2)
1035i
720p
Auto
1080i
480p
575i
575p
480i
InputH-sync freq.V-sync freq.
PIN code lock
Information
Key...

72
LanguageSetting12 languages provided
Blue/User/Black
Auto 1/Auto 2/High
/Normal/Eco 1/Eco 2
Background
Lamp control
Quit
Capture
Logo PIN code change
Logo PIN code lock
Quit
QuitAuto PC adj.
Total dotsHorizontalVertical
Display area HDisplay area VReset
PC Adjust
Yes/No
Clamp
Current mode
Mode free/Store
Quit
Fine sync0–31
Mode 1
H-sync freq.V-sync freq.Quit
NormalTrueWideFull screen
Screen
Logo selectLogoOff/Default/User
Yes/No
On/Off
✔Note:
	 •	The	Menu	display	varies	depending	on	the	input...

Indicators and Projector Condition
Check the indicators for the projector condition.  
The projector is operating normally .
• • • on
• • • off• • •  
blinking at the normal rate       
(approx. 1 second ON,         
1 second OFF)
• • •  blinking slow           
(approx. 2 seconds ON, 
2 seconds OFF)
• • • blinking fast              
(approx. 0.5 seconds ON,  
0.5 seconds OFF)
Indicators
Projector ConditionPOWER
green / red WARNING
TEMP.red WARNING
FILTER
orange SHUTTER
blue LAMP 1/2
REP. 
yellow
The...

The projector is detecting abnormal condition .
Indicators
Projector ConditionPOWER
green / red WARNING
TEMP.red WARNING
FILTER
orange SHUTTER
blue LAMP 1/2
REP.
yellow
The temperature inside the projector is elevated close to 
the abnormally high level.
The temperature inside the projector is abnormally high. 
The projector cannot be turned on. When the projector 
is cooled down enough and the temperature returns to 
normal, the POWER indicator lights red and the projector 
can be turned on. (The...

The projector is detecting abnormal condition .
Indicators
Projector ConditionPOWER
green / red WARNING
TEMP.red WARNING
FILTER
orange SHUTTER
blue LAMP 1/2
REP.
yellow
If the Filter counter reached a time set in the timer 
setting, a Filter replacement icon (Fig.2) appears on the 
screen and the WARNING FILTER indicator on the top 
panel lights up. Replace the filter as soon as possible. If 
the filter is out of scroll and the projector reaches a time 
set in the timer setting, Fig. 3 appears on the...

76
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with th\
e V- and H-Frequency mentioned 
below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes.
Appendix
ON-SCREEN 
DISPLA yRESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
VGA 1 640x480 31.470 59.880 
VGA 2 720x400 31.470 70.090 
VGA 3 640x400 31.470 70.090 
VGA 4 640x480 37.860 74.380 
VGA 5 640x480 37.860 72.810 
VGA 6 640x480 37.500 75.000 
VGA 7 640x480 43.269 85.000...

77
When an input signal is digital from the DVI terminal, refer to the chart below.
PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu.
✔Notes:
	 •	When	the	input	signal	is	D-WXGA	+1	images	may	not	be	displayed	properly	depending	on	 computers
	 •	Specifications	are	subject	to	change	without	notice..
Appendix
ON-SCREEN 
DISPLA y RESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
D-VGA 640x480 31.470 59.940 
D-480p 720x48031.470 59.880 
D-575p 768x57531.250 50.000 
D-SVGA...

78
Technical Specifications
Mechanical Information 
 Projector Type      Multi-media Projector 
  Dimensions (W x H x D)    21.66” x 6.89” x. 17.76” (451.0 mm x 175.0 mm x 550.1 mm) 
  Net Weight     
32.4 lbs (14.7 kg)  
  Feet Adjustment      0˚ to 3.5˚                 
Panel Resolution 
 LCD Panel System      1.0” TFT Active Matrix type, 3 panels  
  Panel Resolution      1,024 x 768 dots 
  Number of Pixels      2,359,296 (1,024 x 768 x 3 panels)           
Signal Compatibility 
 Color System...

79
     Model No.
Long Zoom Lens    : LNS-T11 
Short Fixed Lens    : LNS-W11 
Standard Lens    : LNS-S11 
Long Zoom Lens    : LNS-T10 
Short Zoom Lens    : LNS-W10 
Pj-Net Organizer Plus II     : POA-PN03A 
Pj-Net Organizer Plus IIC     : POA-PN03C
VGA-Cable(10 m)    : KA-MC-DB10
Remote Control Cable     : POA-CA-RC30
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional Parts
Accessories
  Owner’s Manual (CD-ROM)...

80
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified 
conformance with PJLink Standard Class 1.
Projector Input
RGB
RGB (Scart)
RGB (PC analog)
Video
Component
PJLink Input
RGB 3
RGB 2
RGB 1
VIDEO 1
VIDEO 2
Video
S-video
VIDEO 3
VIDEO 4
Input 2
Input 3
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ...