Sanyo Projector Plc Xp57l User Manual

11
PREPARATION
CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR
●Do not drop or bump the projector, otherwise damages or malfunctions may result.
●When carrying the projector, use a suitable carrying case.
●Do not transport the projector by courier or any other transport service in an unsuitable transport case.
This may cause damage to the projector. To transport the projector by courier or any other transport
service, consult your dealer for the best way.
MOVING PROJECTOR
Use the Carrying Handle when...

12
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
When controlling a computer
with the remote control of this
projector, connect the mouse
port of your personal computer
to this connector. (See page
13.)
Connect S-VIDEO
output from video
equipment to this
jack. (See page 14.)Connect an audio output
from video equipment to
these jacks. (See page
14.)
CONTROL PORT CONNECTOR
COMPUTER AUDIO INPUT 1/
AUDIO MONITOR OUTPUT
JACK
AUDIO INPUT JACKSVIDEO INPUT JACKSS-VIDEO INPUT JACK
Connect composite video
output...

13
CONNECTING PROJECTOR
S–VIDEO
R–AUDIO–L VIDEO/Y Cb/Pb    Cr/PrVIDEO/Y Cb/Pb Cr/Pr
RESETCONTROL PORT USBAUDIO 1
AUDIO 2 ANALOG IN/OUTDIGITAL(DVI-D)
INPUT 1
INPUT 2
INPUT 3R/C JACK
GB RH/V V
(
MONO)
IN/OUT
CONNECTING TO COMPUTERS
IBM-compatible computer or Macintosh computer (VGA/SVGA/XGA/SXGA/SXGA+/WXGA/UXGA )
VGA Cable Monitor Output
Desktop type Laptop type
Control Cable
for Serial Port 
Terminal
Serial port PS/2 port Audio Output
CONTROL
PORT COMPUTER
AUDIO IN 1 or 2
COMPUTER IN ANALOG
Use one of...

14
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
Video Source (Example)
Video Cassette Recorder Video Disc Player
S-VIDEO
Cable ✽
Terminals 
of the Projector
S-VIDEO
Output
Cables used for connection(✽= Cables not supplied with this projector.)
Audio Cable
(RCA x 2) ✽
AUDIO IN S-VIDEOY - Cb/Pb - Cr/PrVIDEOComponent video output equipment.
(such as DVD players or high-definition TV sources.)
Composite
Video OutputComponent Video
Output
(Y, Cb/Pb, Cr/Pr)Component Video
Output
(Y, Cb/Pb, Cr/Pr)
Y -...

15
BEFORE OPERATION
FOCUS BUTTON
Used to adjust focus. (p.22)
AUTO PC ADJ. BUTTON
Use to operate the AUTO PC
Adjustment function. (p.26)
KEYSTONE BUTTON
Used to correct keystone
distortion. (p.22, 38)
IMAGE BUTTON
Used to select the image
level. (p.29, 33)
REMOTE CONTROL OPERATION
ALL OFF SWITCH
Left Side
When using the remote control, turn
this switch to “ON.” And turn it to
“ALL OFF” when it is not in use.
This remote control emits laser beam from the Laser Light Window when used as a Laser Pointer....

16
BEFORE OPERATION
To insure safe operation, please observe following precautions:
●Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with an used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture, or heat.
●Do not drop the remote control.
●If a battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
●Danger of explosion if battery is incorrectly replaced....

17
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or
close the On-Screen
Menu. (p.18, 19)
MENU BUTTON
IMAGE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
INPUT BUTTON
WARNING TEMP. INDICATORLAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS 
LAMP REPLACE INDICATOR
Used to select the
image level. (p.29, 33)
Lights green when the
projector is ready to be
turned on. And it blinks
green in the Power
management mode. 
(p.40, 46, 55-56)Becomes dim when the
projector is turned on.
And it becomes...

18
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
You can control and adjust this projector with On-Screen
Menu. Refer to the relevant pages to operate each
adjustment.
2. MOVING POINTER
3. SELECT ITEM
Move the pointer (✽see below) or adjust a value of an item by
pressing the POINT buttons on the top control or on the remote
control.
Select an item or set the selected function by pressing the
SELECT button.
ON-SCREEN MENU
✽The Pointer is an icon in the On-Screen Menu for selecting
an item. See figures in...

19
BEFORE OPERATION
MENU BAR
FOR PC SOURCEPress the MENU button when connecting to the PC input source.
FOR VIDEO SOURCEPress the MENU button when connecting to the VIDEO input source.
Same function as
menu for PC source. Same function as
menu for PC source.
GUIDE WINDOW
Shows the
selected item of
On-Screen Menu.
PC SYSTEM MENU
Used to select a
computer system.
(See pages 24
and 25.)
IMAGE SELECT MENU
Used to select an
image level among
Standard, Real, and
Image 1 ~ 10.
(See page 29.)
SCREEN MENU
Used to...

20
BASIC OPERATION
TURNING ON THE PROJECTOR
TURNING ON / OFF PROJECTOR 
Connect the projector’s AC power cord into an AC outlet. The
LAMP indicator lights RED, and the READY indicator lights
GREEN.
Press the POWER ON-OFF button on the top control or on
the remote control. The LAMP indicator dims, and the cooling
fans start to operate. The preparation display appears on the
screen and the countdown starts. 
2
3
1
16
The preparation display disappears after 30 seconds.
4After the countdown, the input...