Sanyo Projector Plc Xd2600 User Manual

71

Appendix
Compatible Computer Specifications
Basically	this	projector	can	accept	the	signal	from	all	computers	with	the	V-,	H-Frequency	mentioned	below	
and	less	than	140	MHz	of	Dot	Clock.
		When	selecting	these	modes,	PC	adjustment	can	be	limited.
ON-SCREEN DISPLAyRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA	1640	x	48031.4759.88
VGA	2720	x	40031.4770.09
VGA	3640	x	40031.4770.09
VGA	4640	x	48037.8674.38
VGA	5640	x	48037.8672.81
VGA	6640	x	48037.5075.00
MAC	LC13640	x	48034.9766.60
MAC	13640	x...

72

Appendix
Technical Specifications
Mechanical Information 	
	 Projector	Type	 Multi-media	Projector	
	 Dimensions	(W	x	H	x	D)	 13.13"	x		3.35"	x		9.72"	(333.5mm	x	85.2mm	x	247.0mm)		(Not	including	protrusions)	
	 Net	Weight	5.7	lbs	(2.6	kg)	
 Foot  �d�ustment  0˚ to 10˚           
	 		 	 	 	 	 	
Panel Resolution 	
	 LCD	Panel	System	0.55"	TFT	Active	Matrix	type,	3	panels		
	 Panel	Resolution	 1,024	x	768	dots	
	 Number	of	Pixels	2,359,296	(1,024	x	768	x	3	panels)...

7

Appendix
     Model	No.
COMPONENT-VGA Cable     : POA-CA-COMPVGA
S-video-VGA Cable    : POA-CA-VGAS
SCART-VGA Cable   : POA-CA-SCART
VGA-Cable (10 m)	 		: KA-MC-DB10
Soft Carrying Case 	 		:	POA-CAC-VCL2
The	parts	listed	below	are	optionally	available.	When	ordering	those	parts,	specify	the	item	name	and	Model	No.	
to	the	sales	dealer.
Optional Parts
Accessories
	 Owner’s	Manual	(CD-ROM)
	 Quick	Reference	Guide	&	Safety	Manual
	 AC	Power	Cord	
	 Remote	Control	and	Batteries
	 VGA	Cable
	Lens	Cap...

74

Appendix
This	projector	is	compliant	with	PJLink	Standard	Class	1	of	JBMIA	(Japan	Business	Machine	and	Information	
System	Industries	Association).	This	projector	supports	all	commands	defined	by	PJLink	Class	1	and	is	verified	
conformance	with	PJLink	Standard	Class	1.
For	PJ	Link	password,	see	the	owner’s	manual	of	“Network	Set-up	and	Operation.”
PJLink	is	a	registered	trademark	of	JBMIA 	and	pending	trademark	in	some	countries.
Pj Link Notice
Projector	Input
RGB
Computer	2		
Component
RGB	(Scart)...

75

Appendix
COMPUTER IN 1 / S-VIDEO IN/ COMPONENT IN 
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations of Terminals
Red/Cr/S-C	Input	 	
Ground	(Horiz.sync.)
Green/Y/S-Y	Input
-----
Blue/Cb/---	Input
Ground	(Red)
Ground	(Green)
Ground	(Blue)
1
5
2
4

6
7
8
+5V	Power
Horiz.	sync.	Input/Output	(Composite	H/V	sync.)
Ground	(Vert.sync.)
DDC	Data
Ground
Vert.	sync.
DDC	Clock
9
1
10
12
11
14
15
RX	–
TX	+
TX	–
RX	+
2

4
5
6
7
8
1
LAN TERMINAL
-----
-----
----------...

76

Appendix
Write	down	the	PIN	code	number	in	the	column	below	and	keep	it	with	this	manual	securely.	If	you	forgot	or	lost	
the	number	and	unable	to	operate	the	projector,	contact	the	service	center.	
PIN Code Number Memo
Factory	default	set	No:		1	2	3	4*
Factory	default	set	No:		4	3	2	1*
Put	the	label	 below	 (supplied)	 on	in	a	prominent	 place	of	the	
projector's	body	while	it	is	locked	with	a	PIN	code.
While	the	projector	is	locked	with	the	PIN	code.
PIN Code Lock No .
Logo PIN Code Lock No ....

77

Appendix
Dimensions
Unit:	mm(inch)
Screw	Holes	for	Ceiling	MountScrew:	M4Depth:	10.0(0.39)
  99.5(3.92)
  46.0 (1.81)
9.0 (0.35)
  85.2 (3.35)
138.
0
(5.43)
247.
0
(9.72)
 333.5(13.13)
º 10  MAX
 50.0(1.97)
  90.
0
 (3.54)
  19.
0
 (0.75)
 90.0(3.54)
217.0(8.54)
 51.0(2.01)
 10.0(0.39)
  20.
0
 (0.79) 

KR8AC