Sanyo Projector Plc Xc50 User Manual

1

Computer InputComputer Input
Select  an  image  level  among  Dynamic,  Standard,  Real, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3,  and  Image  4  by  pressing  the  IMAGE  button  on  the remote control.
Normal picture level preset on this projector.
Picture level with improved halftone for graphics.
Standard
Real
Image 1 ~ 4
Image Level Selection 
Direct Operation
Blackboard (Green)
P i c t u r e  l e v e l  s u i t a b l e  f o r  t h e  i m a g e  p r o j e c t e d  o n  a...



User preset image in the Image Adjust Menu. (pp.33-34)
Image 1 ~ 4
M o v e   t h e   r e d   f r a m e p o i n t e r  t o  t h e  l e v e l  a n d press the SELECT button.
The level being selected.
Image Select Menu
Image Select Menu icon
Computer Input
Colorboard
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►  buttons  to  move  the  red frame pointer to the Image Select Menu icon.
Press  the  Point ▲▼  buttons  to  move  the  red  frame pointer to the...



Computer InputComputer Input
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►  buttons  to  move  the  red frame pointer to the Image Adjust Menu icon.
Press  the  Point ▲▼  buttons  to  move  the  red  frame pointer  to  the  item  that  you  want  to  adjust,  and  then press  the  SELECT  button.    The  level  of  each  item  is displayed.  Adjust each level by pressing the Point ◄►buttons.
Image Level Adjustment
1
2
M o v e   t h e   r e d   f r a m e...

4

Computer Input
Store
Exit the Image Adjust Menu.
Quit
To  store  the  adjusted  data,  select  Store  and  press  the SELECT button.  Select a level from Image 1 to 4 with the Point ▲▼ buttons and press the SELECT button.  A confirmation box appears and then select [Yes].Stored  data  can  be  called  up  by  selecting  "Image"  in  the Image Level Selection on page 31.
This projector has the picture screen resize function, which enables you to customize the image size.
Press  the  MENU...

5

Computer Input
Custom
Adjust the screen scale and position manually with this function.Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears.
 Scale H/V  ..................  Adjust the Horizontal/Vertical screen scale.
  H&V  ...........................  When  set  to  "On",  the  aspect  ratio 
is  fixed.  The  "Scale  V"  appears dimmed  and  becomes  unavailable. A d j u s t   t h e...

6

Computer Input
When the Digital zoom + is selected, the On-Screen Menu disappears  and  the  message  "D.  zoom  +"  is    displayed.  Press  the  SELECT  button  to  expand  the  image  size.   And press  the  Point ▲▼◄►  buttons  to  pan  the  image.    The Panning  function  can  work  only  when  the  image  is  larger than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the D.ZOOM ▲ button on the remote control.
Digital zoom +
When  Digital  zoom  –  is...

7

Computer InputVideo Input
Choose  Video  by  pressing  the  INPUT  button  on  the  top control  or  choose  Video  by  pressing  the  VIDEO  button or  choose  S-video  by  pressing  the  S-video  button  on  the remote control.Before using these buttons, correct input source should be selected through menu operation as described below.
Input Source Selection (Video, S-video)
Direct Operation
Note:
  When  the  Input  Search  function  is  set  On1  or  On2, the input signal will be searched...

38

Video Input
Choose  Computer  2  by  pressing  the  INPUT  button  on the  top  control  or  press  the  COMPUTER  2  button  on t h e  r e m o t e  c o n t r o l .  C h o o s e  C o m p o n e n t  b y  p r e s s i n g COMPONENT button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as described below.
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Press  the  Point ▲▼  buttons  to  move  the  red  arrow pointer...



Video InputVideo Input
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point ◄►buttons  to  move  the  red frame pointer to the AV System Menu icon.
Video System Selection
Press  the  Point ▲▼  buttons  to  move  the  red  arrow pointer  to  the  system  that  you  want  to  select  and  then press the SELECT button.
1
2
If  the  projector  cannot  reproduce  proper  video  image,  it is  necessary  to  select  a  specific  broadcast  signal  format among  PAL,...

40

Video Input
Select an image level among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3,  and  Image  4  by  pressing  the  IMAGE  button  on  the remote control.
Normal picture level preset on this projector.
Picture level adjusted for the picture with fine tone.
Standard
Cinema
Image 1 ~ 4
Image Level Selection 
Direct Operation
Blackboard (Green)
P i c t u r e  l e v e l  s u i t a b l e  f o r  t h e  i m a g e  p r o j e c t e d  o n  a blackboard.    This...