Sanyo Projector Plc Wxu30 User Manual

51

Setting
Ceiling 
Rear 
Ceiling
When this function is set to “On,” the picture will be top/
bottom and left/right reversed. This function is used to 
project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be left/right \
reversed. This function is used to project the image from 
rear of the screen.
Input search
This function detects the input signal automatically. When 
a signal is found, the search will stop. Use the Point 7 8 
buttons to select...

5

Setting
Power management
Time left before Lamp is off.
Power management
For reducing power consumption as well as maintaining 
the lamp life, the Power management function turns off the 
projection lamp when the projector is not operated for a 
certain period.
If the input signal is interrupted and no button is pressed for 
more than 30 seconds, the timer display with “No signal” 
appears. It starts the countdown until the lamp is turned off. 
Use the Point 7 8 buttons to set the countdown...

53

Setting
On start
Remote control
Remote control
Pointer
When this function is set to “On,” the projector will be 
automatically turned on just by connecting the AC power 
cord to a wall outlet.
✔Note:
 • Be sure to turn off the projector properly (see “Turning 
Off the Projector” on page 23). If the projector is turned 
off in the incorrect sequence, the On start function does 
not work properly.
You can emphasize a part of the projected image with 
this function. Use the Point ed buttons to choose...

5

Setting
Key lock
Key lockSecurity (Key lock and PIN code lock, Alarm settings)
PIN code lockPIN code lock
This function locks the top control and remote control 
buttons to prevent operation by unauthorized persons.
 .....  Unlocked.
 .....  Lock the operation of the top control. To 
unlock, use the remote control.
 .....  lock the operation of the remote control.    
To unlock, use the top control.
If the top control accidentally becomes locked and 
you do not have the remote control nearby or...

55

Setting
Change the PIN code lock setting
Use the Point 7 8 buttons to 
switch between the options.
Use the Point 7 8 buttons to select Off, On1, or On2 and 
then move the pointer to “Quit” with the Point d button. 
Press the SELECT button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
Use the Point ed buttons to enter a number. Press the 
Point 8 button to fix the number and move the red frame 
pointer to the next box. The number changes to “✳.” If you 
fixed an incorrect...

56

This function provides the following options in the cooling 
fans’ operation when the projector is turned off (p.23).
 L1 ......  Normal operation
  L2 ......  Slower and lower-sound than the normal operation 
(L1), but it takes more time to cool the projector 
down.
Fan
Setting
Choose the running speed of cooling fans from the following 
options.
  Normal .....  Normal speed
  Max ..........  Faster than the normal speed.
This function is used to set the cooling fans’ operation to the
projector’s...

57

Setting
Factory default
This function returns all setting values except for the user 
logo, PIN code lock, Logo PIN code lock, lamp counter, and 
filter counter to the factory default settings.
Exit the Setting Menu.
QuitSelect Factory default and this 
box appears. Select [Yes], and 
the next box appears. 
Select [Yes] to 
activate it.
Factory default
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between 
cleanings, a Filter warning...

58

Antitheft Alarm Functionctiontion
How to Use the Antitheft Alarm Function
Antitheft alarm function is provided to prevent the projector from being\
 stolen. When this function is set to “On,” the 
alarm rings as an unauthorized person tries to move the projector.
To activate the Alarm function for the first time after purchase, you must turn on the p\
ower once. 
Press the F button three times to turn the alarm function 
on. The ALARM indicator blinks for a few seconds and the 
projector enters the...

59

Antitheft Alarm Functionctiontion
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN 
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO 
ON PAGE 80, AND KEEP IT SECUREL y . IF yOU FORGET yOUR 
PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM 
FUNCTION CAN NO LONGER BE CHANGED .
Change the PIN code 
Press the F button and enter the four-digit PIN code 
number within about 10 seconds. The ALARM indicator 
blinks red for a few seconds and a high-pitched 
confirmation sound is produced.  
Other...

60

Antitheft Alarm Function
Charge the built-in batteries
Set the Battery charge option in the Alarm setting menu to 
“Auto.” The default setting is “Auto.”
As long as the AC power cord is connected and this option 
is set to “Auto,” the built-in battery for Alarm function is being 
charged at all times. While charging the battery, “Charging” is 
displayed in the menu. 
The “Charging” appears dimmed when the battery is fully 
charged or the Battery charge option is set to “Off,” or if 
charging...