Sanyo Plc Xu350 Projector User Manual

31

PC Adjust Menu
Manual PC Adjustment
Some	computers	 employ	special	signal	formats	 which	may	not	be	tuned	 by	Multi-scan	 system	of	this	 projector.		
Manual	 PC	Adjustment	 enables	you	to	precisely	 adjust	several	 parameters	 to	match	 those	signal	 formats.	 The	
projector 	has 	five 	independent 	memory 	areas 	to 	store 	those 	parameters 	manually 	adjusted. 	It 	allows 	you 	to	
recall	the	setting	for	a	specific	computer.	
1

Use	the	Point	7 8	buttons	to	adjust	the	value,	eliminating	a...

3

Store
To	store	 the	adjusted	 data,	select	Store	and	 then	 press	 the	
SELECT 	button. 	Move 	the 	red 	arrow 	pointer 	to 	one 	of 	the	
Modes	 1	to	 5	in	 which	 you	want	 to	store,	 and	then	 press	 the	
SELECT 	button.
Mode free
To	clear	 the	stored	 data,	select	Mode  free 	and	 then	 press	
the	 SELECT 	button.	 Move	the	highlight	 to	the	 Mode	 that	you	
want	to	clear	and	then	press	the	SELECT 	button.
✔ Note:
	 •	Display area (H/V) cannot	be	selected	 when	480i,	575i,	
480p ,	575p,...

33

Image Select Menu
IMAGE button
Dynamic
Real
Image 1
Image 
Image 3
Image Mode Selection 
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select	the	desired	image	mode	 among	Dynamic,	Standard ,	
Real,	Blackboard (Green) ,	Colorboard,	Image 1,	Image  ,	
Image 3 ,	and	Image 4 	by	 pressing	 the	IMAGE	 button	on	the	
remote	control.
Standard
Picture	mode	with	improved	halftone	for	graphics.
Real
Blackboard (Green)
Image 1–4
For	the	image	projected	on	a	blackboard.
T h i s 	m o...

34

Image Adjust Menu
Image Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
ed	buttons	to	select	Image 
Adjust	and	then	press	the	Point	8	or	the	SELECT 		
button.
1
Use	the	Point	ed	buttons	select	the	desired	item	
and	then	press	the	SELECT 	button	to	display	the	
adjustment	dialog	box.	Use	the	Point	
7 8	buttons	to	
adjust	the	setting	value.
✔  Note:
•	When	White	balance
 Red ,	Green 	or	Blue	is		
		adjusted,	 Color temp . 	will	change	to	
User.
•	When...

35

Store
This	projector	has	the	picture	screen	resize	function,	which	
enables	you	to	customize	the	image	size.Screen Menu
Screen Size Adjustment
Provide	the	image	to	fit	the	screen	size.
Normal
True
Provide	the 	image 	in 	its 	original 	size. 	When 	the 	original	
image	 size	is	larger	 or	smaller	 than	the	screen	 size	(1024	 x	
768),	 the	projector	 enters	to	the	 panning	 mode	automatically.	
Use	 the	Point	
ed7  8 buttons	 to	pan	 the	image	 if	it's	 larger	
than 	the 	screen 	size. 	When...

36

Select	Digital zoom +.	The	 On-Screen	 Menu	disappears	 and	
D . zoom + 	appears.	 Press	the	SELECT 	button	 to	expand	 the	
image	 size.	Use	the	Point	
ed7 8	buttons	 to	pan	 the	image.	
The	Panning	function	can	work	only	when	the	image	is	larger	
than	the	screen	size.
A 	projected 	image 	can 	be 	also 	expanded 	by 	pressing 	the	
D.ZOOM	
e	or	the	SELECT 	button	on	the	remote	control.	
To	exit	the	Digital	zoom	+/–	mode,	press	any	button	except	
the	D.ZOOM	
ed	and	the	SELECT 	buttons.
Digital zoom...

37

Choose	Video	or	S-video 	by	 pressing	 the	INPUT 	button	 on	
the	 top	control,	 or	the	 VIDEO	 button	or	the	 S-video	 button	
on	the	remote	control.
Before	 using	INPUT 	button,	 correct	input	source	 should	be	
selected	through	menu	operation	as	described	below.
1

Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When 	video 	input 	signal 	is 	connected 	to 	the	
VIDEO	jack,	select	Video.Video
When	 video	input	signal	 is	connected	 to	the	 S-...

38

Choose	Computer  1(Component) or	Computer  1(Scart)	by	 pressing	 the	INPUT 	button	 on	the	 top	control	 or	
press	the	COMPUTER	1	or	the	COMPONENT 	button	on	the	remote	control.
Before 	using 	INPUT 	button, 	correct 	input 	source 	should 	be 	selected 	through 	Menu 	operation 	as 	described	
below.
1
Input Menu
Use	the	Point	ed	buttons	to	select	Computer 1 	and	
then	press	the	Point	
8	button.
Input Source Selection (Component, RGB Scart 1-pin)
When	 the	input	 source	 is	coming	 from...

39

Video System Selection
1AV System Menu (Video or S-video)
AV System Menu (Component)

If	the 	projector 	cannot 	reproduce 	proper 	video 	image,	
select	 a	specific	 broadcast	 signal	format	 from	among	
PAL,	
SECAM ,	NTSC,	NTSC 4 .43 ,	PAL-M,	and	PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The
	projector 	automatically 	detects 	an 	incoming 	video	
signal,	and	adjusts	itself	to	optimize	its	performance.
If	the	projector	cannot	reproduce	proper	video	image,	select	
a	specific	component	video...

40

Image Select Menu
Select	the 	desired 	image 	mode 	from 	among 	Dynamic ,	
Standard ,	Cinema ,	Blackboard  (Green) ,	Colorboard ,	
Image  1,	Image  ,	Image  3 ,	and	Image  4 	by	 pressing	 the	
IMAGE	button	on	the	remote	control.
Standard
Picture	mode	adjusted	with	fine	tone.
Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection 
For	the	image	projected	on	a	blackboard.
T h i s 	m o d e 	h e l p 	e n h a n c e 	t h e 	i m a g e 	p r o j e c t e d 	o n 	a...