Sanyo Plc Xp20 Projector User Manual

21
BEFORE OPERATION
VOLUME
ON-OFF
FOCUS
ZOOMVIDEO
COMPUTER
D.ZOOM
MENUMUTE
LASER
KEY STONENO SHOWFREEZE
AUTO IMAGENORMAL
P-TIMER
5
3
2
1
46
7
8
9
10
11
12
13
14
15
16
17
18
19
OPERATION OF THE REMOTE CONTROL
ON
ALL OFF20
FRONTSIDE
LASER POINTER
button
This remote control unit is not only able to operate the projector but also usable
as a wireless mouse for a PC. One pointing pad and two click buttons are used
for wireless mouse operation.
Wireless mouse is usable when PC mouse pointer is displayed on the...

22
BEFORE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
COMPUTER SELECT BUTTON
Used to select computer mode. (Computer 1 or Computer 2 Input)
VIDEO SELECT BUTTON
Used to select video mode.
POWER ON/OFF BUTTON
Used to turn the projector on or off.
ZOOM BUTTONS
Used to operate power zoom lens.
FOCUS BUTTONS
Used to operate power focus system.
VOLUME BUTTONS
Used to adjust volume.
SOUND MUTE BUTTON
Used to mute sound.
DIGITAL ZOOM BUTTONS
Used to operate digital zoom function.
MENU BUTTON
This button will...

3
Replace the compartment lid.
23
BEFORE OPERATION
Remote Control Battery Installation
Using the Remote Control Unit
16.4
(5 m)
60° 60°
1
Remove the battery
compartment lid.
2
Slide the batteries into the
compartment.
Note : For correct polarity (+ and -
terminal), be sure the battery
terminals are in contact with the
pins in the compartment.
Point the remote control toward the projector (Receiver window) when pressing the buttons. Maximum operating range for
the remote control is about 16.4 (5 m) and...

ADJUST ITEM
24
DIRECT OPERATION
REMOTE CONTROL
LAMP POWER ON/OFFPOWER ON-OFF
MODE
VOLUME (+) and (–)
VOLUME (+) and (–)
MUTE
ZOOM () and ()
FOCUS () and ()FOCUS () and ()
FREEZE
NORMALNO SHOW
AUTO IMAGE AUTO IMAGE MODE SELECT
SOUND VOLUME
SOUND MUTE
ZOOM
FOCUS
DIGITAL ZOOM
NO SHOW
FREEZE PICTURE
AUTO IMAGETOP CONTROL OF 
THE PROJECTOR
CONTROL THE PROJECTOR
NORMAL NORMAL PICTURE
BEFORE OPERATION
POWER ON-OFF
COMPUTER
VIDEO
D. ZOOM () and ()
KEYSTONEKEYSTONE () and ()
P-TIMERP-TIMER ZOOM () and...

25
BEFORE OPERATION
COLOR SYSTEM
ADJUST ITEM
MODE SELECTREMOTE CONTROL
SOUND
SOUND VOLUME
SOUND MUTE
MENU
POINT LEFT/RIGHT
SELECT
POINT UP/DOWN
SELECTTOP CONTROL OF 
THE PROJECTOR
1. COMPUTER/VIDEO MODE
2. VIDEO MODE
MENU OPERATION
ADJUST  ITEM
LANGUAGE
SETTING
BLUE BACK
DISPLAY
CEILING
REAR
SPLIT WIPE
POWER MANAGEMENT
REMOTE CONTROL
LAMP AGETOP CONTROL OF 
THE PROJECTOR
ADJUST ITEM
VIDEO SOURCE
PICTURE IMAGE
COLOR
TINT
WHITE BALANCE
CONTRAST
BRIGHTNESS
SHARPNESS
PICTURE SCREEN
WIDE
REGULAR...

26
BEFORE OPERATION
COMPUTER SYSTEMADJUST ITEM
3. COMPUTER MODE
NOTES :
1. If you switch to DIRECT operation by pressing a DIRECT operation button while in MENU mode, the menus will
disappear and the MENU operation will end.
2. You can use the REMOTE CONTROL UNIT or the TOP CONTROL OF THE PROJECTOR to operate the MENU
operation.
AUTO IMAGE
FINE SYNC
TOTAL DOTS
POSITION
PICTURE IMAGE
FINE SYNC
TOTAL DOTS
WHITE BALANCE
CONTRAST
BRIGHTNESSTOP CONTROL OF 
THE PROJECTOR
PICTURE POSITION
PC ADJUSTMENT
PICTURE...

27
BASIC OPERATION
MODE SELECT
Connect the projector to a source (Computer, VCR, Video Camera, Video Disc Player, etc.) using the appropriate
terminals on the rear of the projector. (See CONNECTING THE PROJECTOR section on pages 11-18).
Connect the projectors AC power cord into a wall outlet and turn the MAIN ON/OFF switch (located on the rear of the
projector) to the ON position. The LAMP POWER indicator will light RED, the READY indicator will light GREEN.
Press the POWER ON/OFF button on the remote...

28
Press the VOLUME buttons on the remote control unit or on the projector to adjust
the volume. The volume display will be displayed on the screen for a few seconds.
Pressing volume (+) will increase volume and increase the number on the screen.
Pressing volume (-) will decrease volume and decrease the number on the screen.
FOCUS ADJUSTMENT
ZOOM ADJUSTMENT
SOUND MUTE FUNCTION
SOUND VOLUME ADJUSTMENT
Pressing the MUTE button on the remote control unit will mute audio. Press the
MUTE button again to...

29
BASIC OPERATION
Press the FREEZE button on the remote control unit to freeze the picture on screen. This function is cancelled when the
FREEZE button is pressed again or  any other button is pressed.
NOTE:Your computer or video equipment is not affected by this function, and will continue to run.
NO SHOW FUNCTION
NORMAL PICTURE FUNCTION
FREEZE PICTURE FUNCTION
AUTO IMAGE FUNCTION
Press the NO SHOW button on the remote control unit. The screen will change into
black image and the NO SHOW is displayed...

30
MENU OPERATION
BASIC OPERATION
MODE
SELECT
AUTO IMAGE NORMALMENU
SELECT
BUTTON
You can select a mode from MAIN MENU display among computer 1, computer 2 and video.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select Computer or Video and press the SELECT BUTTON. Another
dialog box MODE DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to the mode you want (computer 1, computer 2 or...