Sanyo Plc Xl20 Projector User Manual
Have a look at the manual Sanyo Plc Xl20 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Screen Menu icon. When the Digital zoom + is selected, the On-Screen Menu disappears and the message “D. Zoom +” is displayed. Press the SELECT button to expand the image size. And press the Point Up/Down/Left/Right button to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM button on the remote control. 1 To cancel the Digital Zoom +/– mode, press any button except the D.ZOOM /, SELECT, R-CLICK, and Point button. Move the red frame to the function and press the SELECT button. Press the Point Down button and move the red frame pointer to the function that you want to select and then press the SELECT button.2 Wide Digital zoom + NOTE This Screen Menu cannot be operated when “720p (HDTV)”, “1035i (HDTV)”, or “1080i (HDTV)” is selected in the PC System Menu (p25). The True and Digital zoom +/– cannot be selected when “480i”, “575i”, “480p”, or “575p” is selected in the PC System Menu (p25). This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting to the projector. The image data in other than XGA (1024 x 768 for PLC-XL20) or SVGA (800 x 600 for PLC-SL20) is modified to fit the screen size in initial mode. The panning function may not operate properly if the computer system prepared in the PC Adjust Menu is used. Provides image to fit screen size.Normal True Screen Menu Screen Menu icon When the Digital zoom – is selected, the On-Screen Menu disappears and the message “D. Zoom –” is displayed. Press the SELECT button to compress the image size. A projected image can be also compressed by pressing the D.ZOOM button on the remote control. Digital zoom – Provides image in its original size. When the original image size is larger than the screen size (1024 x 768 for PLC-XL20, 800 x 600 for PLC-SL20), this projector enters “Digital zoom +” mode automatically. Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9. Screen Size Adjustment
32 Video Input Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Input Menu icon. Press the Point Down button to move the red arrow pointer to Video and then press the SELECT button. The Source Select Menu will appear. 1 2 Move the pointer to Video and press the SELECT button. VIDEO Move the pointer to the source that you want to select and press the SELECT button. Source Select Menu (VIDEO) Input Menu Move the pointer to the source that you want to select and then press the SELECT button.3 When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1st S-Video 2nd Video The S-VIDEO jack has priority over the VIDEO jack under the condition of connecting both the S-VIDEO jack and the VIDEO jack. Auto When video input signal is connected to the VIDEO jack, select Video.Video When video input signal is connected to the S-VIDEO jack, select S-Video.S-Video INPUT button Video Computer 2 Computer 1 VIDEO button Video When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. ✽ ✽ When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. ✽ Input Source Selection (Video, S-Video) Direct Operation Menu Operation NOTE See “Computer Input” on page 24 for a signal compatible with HDCP.
33 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Input Menu icon.1 Press the Point Down button to move the red arrow pointer to Computer 2 (Only the Computer 1 is displayed when Monitor out is selected in the Setting Menu.), and then press the SELECT button. The Source Select Menu will appear. 2 Move the pointer to the correct input source and then press the SELECT button.3 Move the pointer (red arrow) to Computer 2 and press the SELECT button. Computer 2 Move the pointer to Component or RGB (Scart ) and press the SELECT but- ton. Source Select Menu Input Menu Input Menu icon Computer 1 Video Computer 2 COMPUTER button Computer 1 Computer 2 INPUT button Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal is used as Monitor out. ✽ ✽ ✽ Input Source Selection (Component, RGB Scart 21-Pin) Direct Operation Menu Operation When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal with a Component-VGA Cable, select Component. Component When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal with a Scart-VGA Cable, select RGB (Scart). RGB (Scart) NOTE Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 53 for order. Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.
34 Video Input AV System Menu (Video or S-Video) AV System Menu (Component) Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the AV System Menu icon. Press the Point Down button to move the red arrow pointer to the system that you want to select and then press the SELECT button. 1 2 If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Move the pointer to a system and press the SELECT button. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N The projector automatically detects incoming video signal, and adjusts itself to optimize its performance. If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. Auto COMPONENT VIDEO SIGNAL FORMAT Video or S-Video Component The projector automatically detects incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. Auto AV System Menu icon This box indicates the system being selected. Move the pointer to a system and press the SELECT button. AV System Menu icon This box indicates the system being selected. Video System Selection NOTE The AV System Menu cannot be selected when selecting RGB(Scart).
35 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Image Select Menu icon.1 2Press the Point Down button to move the red frame pointer to the level that you want to set and then press the SELECT button. Move the red frame pointer to a level and press the SELECT button. The level being selected. Image Select Menu Normal picture level preset on this projector.Standard Picture level adjusted for the picture with fine tone.Cinema User preset image in the Image Adjust Menu (p36, 37).IMAGE 1~4 Image Select Menu icon Select an image level among Standard, Cinema, Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Normal picture level preset on this projector. Standard Picture level adjusted for the picture with fine tone. Cinema User preset image in the Image Adjust Menu (p36, 37). IMAGE 1~4 IMAGE button Standard Cinema Image 1 Image 2 Image 3 Image 4 Image Level Selection Direct Operation Menu Operation
36 Video Input Press the Point Left/Right but- ton to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Image Adjust Menu icon.1 2Press the Point Down button to move the red frame pointer to the item that you want to adjust and then press the SELECT button. The level of each item is displayed. Adjust each level by pressing the Point Left/Right button. Move the red frame pointer to the item to be selected and then press the SELECT button. Image Adjust Menu Press the Point Left button to decrease contrast and the Point Right button to increase contrast. (From 0 to 63.) Press the Point Left button to adjust image darker and the Point Right button to adjust image brighter. (From 0 to 63.)Contrast Brightness Press the Point Left/Right button to obtain better balance of contrast. (From 0 to 15.)Gamma Press the SELECT button at this icon to display other items. Image Adjust Menu icon Press the Point Left button to lighten color and the Point Right button to deepen color. (From 0 to 63.) Press the Point Left/Right button to obtain proper color. (From 0 to 63.)Color Tint Press the Point Left button to soften the image and the Point Right button to sharpen the image. (From 0 to 15.)Sharpness Press the Point Left button to lighten red tone and the Point Right button to deepen red tone. (From 0 to 63.)White balance (Red) Press the Point Left button to lighten green tone and the Point Right button to deepen green tone. (From 0 to 63.)White balance (Green) Press the Point Left button to lighten blue tone and the Point Right button to deepen blue tone. (From 0 to 63.)White balance (Blue) Press the SELECT button at this icon to store the value. Press the SELECT button at this icon to display previous items. NOTE The Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M, or PAL-N. Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. Image Level Adjustment Press the Point Left/Right button for Color temp. level that you want to select. (XLow, Low, Mid, or High) Color temp. Interlace video signal can be displayed in a progressive picture. Off ···· Not activated. L1 ···· Select “L1” for an active picture. L2 ···· Select “L2” for a still picture.Progressive
37 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Screen Menu icon. Press the Point Down button and move the red frame pointer to the function that you want to select and then press the SELECT button. 1 2 Move the red frame to a function and press the SELECT button. Screen Menu Screen Menu icon Provides image at a wide screen ratio of 16 : 9.Wide Provides image at a normal video aspect ratio of 4 : 3.Normal To store the adjustment data, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer to the Image Level 1 to 4 and then press the SELECT button.Image Level Menu Move the red frame pointer to an image icon to be set and then press the SELECT button. Store icon Resets all adjustment to their previous figure. Reset Store Closes the Image Adjust Menu. Quit Screen Size Adjustment NOTE Screen Menu cannot be operated when “720p”, “1035i”, or “1080i” is selected in the AV System Menu (p34).
38 Setting Keystone Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Setting Menu icon.1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese. Display This function decides whether to display On-Screen Displays. On ···· shows all the On-Screen Displays. Off ···· does not show On-Screen Displays except; On-Screen Menu “Power off?” message P-Timer “No signal” message ”Wait a moment!” message Set the red frame pointer to the item and press the SELECT button.Press the Point Down button to move the red frame pointer to the item that you want to set and then press the SELECT button. The Setting dialog box appears. Blue back When this function is “On,” the projector produces a blue image while input signal is not detected. Logo This function decides what to be displayed when starting up. User ···· the image you captured Default ···· the factory-set logo Off ···· count-down only When pressing the SELECT button at Language, the Language Menu appears. Setting Menu (Language) Setting Menu icon This function corrects distortion of a projected image. Select either Store or Reset with the Point Left/Right button, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point Up/Down/Left/Right button. Store ···· stores the keystone adjustment even if the AC power cord is disconnected. Reset ···· resets the keystone adjustment when the AC power cord is disconnected. Setting Capture This function is used to capture the image being projected and use it for a starting-up display or interval of presentations. After capturing the projected image, go to the Logo function (above) and set it as “User”. Then the captured image will be displayed when turning on the projector next time or pressing the NO SHOW button. (p21) To capture the image, select [Yes]. To cancel the Capture function, select [No]. Before captureing an image, select Standard in the Image Select Menu to capture a proper image. (See page 29, 35.) A signal from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. When capturing the image that has been adjusted by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone adjustment. Select [Yes] to capture the projected image. Select [Yes] to stop capturing. Capture
39 Setting Terminal The COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal on the back of the projector can be used as computer input or monitor output by switching Terminal with the Point Left/Right button. To use the terminal as computer input, Component video input, or RGB Scart 21-Pin Video input, select Computer 2. To use the terminal as monitor out, select Monitor out. Terminal cannot be switched into Monitor out after selecting Computer 2. In this case, select other input source such as Computer 1 or Video, and you will select Terminal. Standby mode For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more. When the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with the message No signal appears on the screen. The count-down starts for the time to have been set. The count-down time can be set between 1 and 30 minutes. When the count-down time has elapsed, the lamp will be turned off to cool itself down. The POWER indicator is flashing red during this cooling-off period. The next performance depends on setting as follows. Ready ······When the lamp has been fully cooled down, the POWER indicator changes to green flashing. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed. Shutdown····When the lamp has been fully cooled down, the power will be turned off. Off ··············· The Power management function is canceled. Power management On start When this function is “On,” the projector is automatically turned on just by connecting the AC power cord to a wall outlet. NOTE Be sure to turn the projector off properly (see “Turning Off the Projector” on page 19). If the projector is turned off in the wrong steps, the On start function does not operate properly. Ceiling Rear Ceiling When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen. Time left until Lamp off Press the SELECT button at this icon to display other items. Press the SELECT button at Power management and this box appears. Choose one of three settings with the Point Left/Right button, and go to the timer with the Point Up/Down button and set time with the Point Left/Right but- ton. Standby mode Power management This function is available when using Multi Card Imager optionally supplied, and it reduces standby energy when selecting Eco. Eco ···· reduces standby energy. Normal ···· consumes normal standby energy.
40 Setting This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 44 for operation.Lamp counter reset Remote control This projector provides eight different remote control codes (Code 1- Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. For example operating the projector in “Code 7”, both the projector and the remote control must be switched to “Code 7”. To change the code for the projector; Select a remote control code in this Setting Menu. To change the code for the remote control; While holding down the MENU button, press the IMAGE button number of times corresponding to the remote control code for the projector. (See page 14 for details.) Select Spotlight or Pointer with the Point Up/Down button and press the SELECT button. Then select size or pattern with the Point Left/Right button. When pressing the SELECT button at Remote control, the remote control code menu appears. Pointer You can emphasize a part of the projected image with this function. Choose either Spotlight or Pointer with the Point Up/Down button and press the SELECT button. Then select one of three different sizes (Large, Middle, and Small) of Spotlight or a pointer of three different patterns (Arrow, Finger, and Dot) of Pointer. (See page 13 for operation.) Key lock This function locks operation of the top control and remote control. It is useful to prevent operation by a third person. ···· not locked. ···· locks operation of the top control. To unlock, use the remote control. ···· locks operation of the remote control. To unlock, use the top control. Factory default This function returns all setting values except for the lamp counter to the factory default settings. Select Key lock and this box appears. Choose one of these with the Point Up/Down button and select [Yes] to activate it. Select Factory default and this box appears. Select [Yes] , and the next box appears. If the top control accidentally becomes locked and you do not have the remote control nearby, disconnect the AC power cord to turn off the power, and then while pressing the SELECT button, reinsert the AC power cord. This will cancel the top control lock.Pointer Remote control Key lock Factory default Select [Yes] to activate it.