Sanyo Plc Xf46n Projector User Manual
Have a look at the manual Sanyo Plc Xf46n Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 APPENDIX COMPATIBLE COMPUTER SPECIFICATIONS –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAYRESOLUTIONH-Freq. (kHz)V-Freq. (Hz) VGA 1640 x 48031.4759.88 VGA 2720 x 40031.4770.09 VGA 3640 x 40031.4770.09 VGA 4640 x 48037.8674.38 VGA 5640 x 48037.8672.81 VGA 6640 x 48037.5075.00 MAC LC13640 x 48034.9766.60 MAC 13640 x 48035.0066.67 MAC 16832 x 62449.7274.55 MAC 191024 x 76860.2475.08 MAC 211152 x 87068.6875.06 45.0060.00 SVGA 1800 x 60035.15656.25 SVGA 2800 x 60037.8860.32 SVGA 3800 x 60046.87575.00 SVGA 4800 x 60053.67485.06 SVGA 5800 x 60048.0872.19 SVGA 6800 x 60037.9061.03 SVGA 7800 x 60034.5055.38 SVGA 8800 x 60038.0060.51 SVGA 9800 x 60038.6060.31 SVGA 11800 x 60038.0060.51 ON-SCREEN DISPLAYRESOLUTIONH-Freq. (kHz)V-Freq. (Hz) XGA 111024 x 768 XGA 131024 x 768 XGA 141024 x 768 61.0075.70 XGA151024 x 768 46.9058.20 XGA 81024 x 768 47.0058.30 XGA 91024 x 768 (Interlace) 58.0372.00 SXGA 11152 x 864 SXGA 21280 x 1024 63.4879.35 SXGA 31280 x 1024 36.0087.17 SXGA 41280 x 1024 64.2070.40 SXGA 51280 x 1024 62.5058.60 SXGA 61280 x 1024 63.9060.00 SXGA 71280 x 1024 63.3459.98 SXGA 81280 x 1024 63.7460.01 SXGA 111152 x 900 71.6967.19 SXGA 121152 x 900 81.1376.107 SXGA 131280 x 1024 (Interlace) 63.9860.02 SXGA 141280 x 1024 (Interlace) 61.2065.20 71.4075.60 50.0086.00 50.0094.00 XGA 11024 x 768 XGA 21024 x 768 XGA 31024 x 768 XGA 41024 x 768 48.3660.00 68.67784.997 XGA 61024 x 768 60.02375.03 XGA 71024 x 768 56.47670.07 48.5060.02 44.0054.58 SXGA 91280 x 1024 SXGA 101280 x 960 79.97675.025 60.0060.00 SXGA 151280 x 1024 SXGA 161280 x 1024 SXGA 171152 x 900 SXGA 181280 x 1024 (Interlace) 63.3760.01 76.9772.00 61.8566.00 46.4386.70 SXGA 191280 x 102463.7960.18 XGA 51024 x 76860.3174.92 VGA 7640 x 48043.26985.00 575i–––––––– (Interlace)15.62550.00 480i–––––––– (Interlace)15.73460.00 1080i/60–––––––– (Interlace)33.7560.00 1035i–––––––– (Interlace)33.7560.00 SVGA 10800 x 60032.7051.09 SXGA 201280 x 102491.14685.024 480p–––––––– (Progressive)31.4759.88 XGA 101024 x 76862.0477.07 1080i/5028.12550.00 SXGA+ 11400 x 105063.9760.19 SXGA+ 21400 x 105065.3560.12 WXGA 31376 x 76848.3660.00 WXGA 41360 x 76856.1672.00 XGA 1235.52286.96 575p–––––––– (Progressive)31.2550.00 SXGA+ 31400 x 105065.1259.90 WXGA 11366 x 76848.3660.00 WXGA 21360 x 76847.7060.00 MAC1280 x 96075.0075.08 MAC1280 x 102480.0075.08 Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 230 MHz of Dot Clock. 720p–––––––– (Progressive) UXGA 31600 x 120087.5070.00 UXGA 41600 x 120093.7575.00 UXGA 11600 x 120075.0060.00 UXGA 21600 x 120081.2565.00 SXGA 211400 x 105063.9060.00
52 APPENDIX NOTE :Specifications are subject to change without notice. ON-SCREEN DISPLAYRESOLUTIONH-Freq. (kHz)V-Freq. (Hz) D-VGA640 x 48031.4759.94 D-480p720 x 480 (Progressive)31.4759.88 D-575p768 x 575 (Progressive)31.2550.00 D-SVGA800 x 60037.87960.32 D-XGA1024 x 76843.36360.00 ON-SCREEN DISPLAYRESOLUTIONH-Freq. (kHz)V-Freq. (Hz) D-WXGA 11366 x 76848.3660.00 D-WXGA 41360 x 76856.1672.00 D-1035i1920 x 1035 (Interlace)33.7560.00 D-1080i/601920 x 1080 (Interlace)33.7560.00 D-1080i/501920 x 1080 (Interlace)28.12550.00 D-WXGA 21360 x 76847.7060.00 D-WXGA 31376 x 76848.3660.00 D-720p1280 x 720 (Progressive)45.0060.00 D-WXGA 51368 x 76846.5050.00 D-SXGA 11280 x 102463.98060.020 When a input signal is digital from DVI terminal, refer to chart below. D-SXGA 21280 x 102460.27658.069 Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. D-SXGA 31280 x 102431.65029.80 1400 x 105063.97060.19D-SXGA+ 1 D-UXGA 11600 x 120075.0060.00 OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ●DVI Board (HDCP Compatible) Type No. : POA-MD18DVI ●5 BNC Board Type No. : POA-MD16VD1 ●Video/Y,C & S-Video Board Type No. : POA-MD03VD2A ●D-Sub 15 Board Type No. : POA-MD04VGA ●Network Board Type No. : POA-MD13NET/POA-MD13NET2 ●Dual SDI Board Type No. : POA-MD17SDID ●DVI Board Type No. : POA-MD11DVI
53 APPENDIX Owner’s Manual (CD-ROM) Quick setup manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable VGA Cable 6 Types Light-Block Sheet (For option lens) 2 Types Lens Attachment (For option lens) Real Color Manager ProAccessories TECHNICAL SPECIFICATIONS 1.8 TFT Active Matrix type, 3 panels Multi-media Projector 80.3 lbs (36.5 kg) 22.9 x 10 x 30.9 (581 mm x 252 mm x 783 mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N Up, Down, Left and Right 800 TV lines 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C) 14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C) Projector Type Net Weight Dimensions (W x H x D) Panel Resolution Number of Pixels Color System Scanning Frequency Horizontal Resolution Operating Temperature Storage Temperature LCD Panel System 300 watt type x 4Projection Lamp 0˚ to 5.7˚Feet Adjustment Power Source : AA or R06 Type x 2 Operating Range : 16.4’ (5m) / ±30˚ Dimensions : 1.97” x 1.06” x 6.61” (50mm x 27mm x 168mm) Net Weight : 4.6 oz (129 g) (including batteries)Remote Control Transmitter 480i, 480p, 575i, 575p, 720p, 1035i, 1080i-50 and 1080i-60High Definition TV Signal AC 120 V (16 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada) AC 200 ~ 240 V (9.0 A Max. Ampere), 50 / 60 Hz (Continental Europe and The U.K.) Voltage and Power Consumption H-sync. 15 ~ 120 KHz, V-sync. 50 ~ 120 Hz Motorized Lens Shift DVI-I Terminal (Digital/Analog), RCA Type (Audio R and L) and DIN 8-pin (Control port)Input 1 Jacks BNC Type x 5 (R/Pr, G/Y, B/Pb, H/HV and V), RCA Type (Audio R and L) and DIN 8-pin (Control port)Input 2 Jacks BNC Type x 2 (VIDEO/Y, C), RCA Type (Audio R and L) and DIN 4-pin (S-Video)Input 3 Jacks Serial port in (DB 9), Serial port out (DB 9), USB port, Audio out (RCA Type R and L) and Wired Remote Jack Other Jacks HDB 15-pin Terminal (Analog), RCA Type (Audio R and L) and DIN 8-pin (Control port)Input 4 Jacks ●Specifications are subject to change without notice. ●LCD panels are manufactured to the highest possible standards. At least 99.99% of the pixels are effective, however a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. ●Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector.
54 APPENDIX Vcc - Data + Data Ground 1 2 3 4 USB PORT TERMINAL Pin Configuration Connect USB port output terminal of computer or peripheral equipment to this terminal with USB port Cable (not supplied). 2 341 CONFIGURATIONS OF TERMINALS HDB 15-PIN TERMINAL (ANALOG) Connect display output terminal of computer to this terminal with VGA Cable (supplied). 512341096781514131112 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC Data Sense 0 Vert. sync. DDC Clock 9 13 10 12 11 14 15 Pin Configuration DVI-I TERMINAL (DIGITAL/ANALOG) This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to this terminal with DVI cable (not supplied). 1917 21018 31119 41220 51321 61422 71523 81624 C1 C2 C3 C5C4 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data Analog Vert. sync 1 5 2 4 3 6 7 8 Pin Configuration T.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 13 10 12 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 21 18 20 19 22 23 24 Analog Red Input Analog Ground (R/G/B) Analog Green Input Analog Horiz. sync Analog Blue Input C1 C5 C2 C4 C3 ----- RxD TxD ----- Ground ----- ----- ----- 1 2 3 4 5 6 7 8 9----- 1 2 3 4 5 6 7 8 9 Connect serial port output terminal of computer to this terminal with Serial Cable (not supplied). Pin Configuration SERIAL PORT IN/OUT TERMINAL
55 APPENDIX DIMENSIONS 22.87 (581.0) Unit : inch (mm) Screw Holes for Ceiling Mount Screws: 9-M8 Depth: 0.315 (8.0) 9.90 (251.5)10.15 (258.0) 5.18 (131.5) 9.90 (251.5) 5.7° 2.36 (60.0) 30.83 (783.0) 17.56 (446.0) 22.87 (581.0) 9.25 (235.0) 8.62 (219.0)17.56 (446.0) 7.01 (178.0) 7.01 (178.0) 4.23 (107.5) 3.26 (82.8) 9.72 (247.0) 14.74 (374.5) 6.81 (173.0) 1.38 (35.0) 1.57 (40.0) 8.27 (210.0)8.27 (210.0) 10.61 (269.5) 22.93 (582.5)
- 1 - E LCD PROJECTOR LENS REPLACEMENT AND INSTALLATION PROCEDURES CAUTION When installing or replacing the Projection Lens, refer to this manual. For installation of the lens, use the parts designated in the manual. Do not use the installation manual and Light-Block Sheets in the lens package. Check the following parts supplied to this projector. NOTES ON LENS INSTALLATION ●Lens installation and replacement should be made by the qualified service personnel. ●Be sure to install the lens following this procedure precisely. ●Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents. ●Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the projector. ●When moving or setting up the projector, be sure to replace the Lens Cover to protect the surface. And be careful not to hold or subject the lens to strong forces. It may damage the lens, cabinet, or mechanical parts. ●For details of the lens and installation, contact the sales dealer where you purchased the projector. ● LIGHT-BLOCK SHEETS 6 pcs. ● LENS ATTACHMENT (01) 1 pce. ● LENS ATTACHMENT (02) 1 pce. This projector applies the Projection Lenses listed below. Use the suitable lens for where the projector is used. AVAILABLE LENS Model NO. LNS-W01 LNS-W01Z LNS-T01 LNS-T01Z LNS-T02 LNS-W02 LNS-W02Z LNS-M01 LNS-M01Z LNS-S02 LNS-S02Z Type Fixed Short Throw Lens Fixed Long Throw Lens Long Throw Zoom Lens Short Throw Zoom Lens I Semi-Long Throw Zoom Lens Standard Zoom Lens II Zoom Motor Driven FixedManual Focus Fixed Motor Driven Motor Driven Motor Driven Manual Motor Driven Motor Driven Motor Driven Motor Driven LNS-W03 LNS-S03 Short Throw Zoom Lens II Standard Zoom Lens III FixedManual Motor DrivenMotor Driven LNS-W04Wide Zoom LensMotor DrivenMotor Driven LNS-W06Wide Zoom LensMotor DrivenMotor Driven LNS-T03Long Throw Zoom LensManualManual
- 2 - E NOTE : The installation procedure and needed parts for lens installation depend on the type of the Projection Lens. Check the Model No. of the Projection Lens and be sure to install or replace the lens following procedure below. 1 Remove Lens Cover. Remove 2 Screws A. Push part B and pull Upper Lens Cover up. (See Fig. 1.) 2 Remove 4 Screws C. Pull Lower Lens Cover toward front and remove. (See Fig. 2.) 3 Remove 2 Screws D and Cover Plate on the back of Upper Lens Cover. (See Fig. 3.) LENS REPLACEMENT AND INSTALLATION PROCEDURE Fig-1 UPPER LENS COVER A Fig-2 LOWER LENS COVER C COVER PLATE UPPER LENS COVER D Fig-3 C B
- 3 - E LENS LOCK SCREW DRIVER IN THE LENS LOCATE MOTOR ON RIGHT SIDELENS ATTACHMENT Part No. (610 275 6029) CONNECTOR Fig-4 LENS MOTOR LEAD Fig-6 Fig-5 Fig-7 LENS LOCK LEVER LENS ATTACHMENT SOCKET Lens attachments For each lens. LNS-W01, LNS-W01Z, LNS-W02Z, LNS-W03, LNS-T01, LNS-T01Z, LNS-T02, LNS-T03, LNS-S02, LNS-S02Z, LNS-S03, LNS-M01Z, LNS-W04, LNS-W06 Lens Attachment 01 POA-LNA-01 (610 303 8742) LNS-W02, LNS-M01Lens Attachment 02 POA-LNA-02 (610 304 6228) Lens Model No.LENS ATTACHMENT TYPE No. (PART No.) LENS LOCK RELEASELENS LOCK 4 Remove Lens Cap on the rear (mounting side) of Projection Lens and mount Lens on the lens Attachment with 4 Screws. (Use screws attached on lens.) 5 Grasp (release lock) the Lens Lock Lever and turn it fully upward. (See Fig. 6.) Install the Lens into the projector. Grasp the Lens Lock Lever and turn the Lever fully downward until lever is Locked (clicked position) properly. (See Fig. 7.) When installing the Motor Driven Lens, be sure to mount Lens Motor on right side. (See Fig. 4.) After installing the lens, make sure the Lens is not loose and properly installed. Connect the Lens Motor Lead connector to the socket on the right-top of the lens attachment. (Motor Driven Lens only.) See Fig. 5. Grasp (unlock) Lens Lock Lever and pulling upward.Grasp (unlock) Lens Lock Lever and fully pulled downward until it is locked (clicked).
- 4 - E 6 This projector has 6 Light-Block Sheets. Use 2 Light-Block Sheets corresponding with lens. (Refer to the list below.) Use 1 Light-block Sheet for MODEL LNS-W03 Set 2 Light-Block Sheets through the lens. Make sure the shape of the Light-Block Sheets are correct and be sure to set them as shown in the Fig. 8. NOTE: ●Be sure to set each Light-Block Sheet as shown in Fig-8. ● Make sure the mark (TOP and BACK) on Light-Block Sheets are correct and set them properly. Light-Block Sheets For each lens. Fig-8 LIGHT BLOCK SHEETS Make sure the sheet figures are correct and put in proper position.LIGHT BLOCK SHEET Make sure the sheet figure is correct and put in proper position. MODEL LNS-W03 Lens Model No. LNS-S02, LNS-S02Z LNS-M01, LNS-T02, LNS-W02 LNS-M01Z, LNS-W02Z LNS-W01, LNS-T01, LNS-W01Z LNS-T01Z, LNS-S03, LNS-W04 LNS-W06 Type No. (Part No.) TYPE FA1 (610 322 7559) TYPE FA2 (610 322 7894) TYPE FB1 (610 322 7719) TYPE FB2 (610 322 7351) TYPE FC1 (610 322 8136) TYPE FC2 (610 322 4329) LNS-W03TYPE FB1 (610 322 7719)