Sanyo Plc Xf41 Projector User Manual

11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from
computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just
by changing Terminal Boards.  For Terminal Boards, contact sales dealer where you purchased a projector.
Pull out terminal by holding handle.
Remove 2 Screws on terminal.1
2
REPLACEMENT OF TERMINAL
Tighten screws...

12
CONNECTING PROJECTOR
ANALOG RGB
R/Pr G/Y B/Pb H/HV V
CONTROL PORTDV I
INPUT 1
R/C JACK
USB
RESET
(MONO)
(MONO)(MONO) (MONO)(MONO)
CONTROL PORT AUDIO
CONTROL PORT
S-VIDEO
VIDEO/YC
INPUT 2 INPUT 3
INPUT 4
AUDIO
AUDIO AUDIO
SERIAL PORT IN
SERIAL PORT OUT
AUDIO OUTRLRL
RL
R
R
L
L
When controlling computer
with Remote Control of this
projector, connect mouse port
of your personal computer to
these connectors.  (Refer to
P14.)
Connect S-VIDEO output
from video equipment to
this jack.  (Refer to P15.)...

13
CONNECTING PROJECTOR
Connect an external audio
amplifier to these jacks.  
(Refer to P14, 15.)
AUDIO OUTPUT JACKS
This projector uses a micro processor to control unit.
Occasionally, micro processor may malfunction and
need to be reset.  This can be done by pressing
RESET button with a pen, which will shut down and
restart unit. Do not use RESET function excessively.
RESET BUTTON
When using Wired / Wireless Remote
Control Unit as Wired Remote
Control, Connect Wired Remote
Control Unit to this jack...

ANALOG RGB
R/Pr G/Y B/Pb H/HV V
CONTROL PORTDV I
INPUT 1
R/C JACK
USB
RESET
(MONO)
(MONO)(MONO) (MONO)(MONO)
CONTROL PORT AUDIO
CONTROL PORT
S-VIDEO
VIDEO/YC
INPUT 2 INPUT 3 INPUT 4
AUDIO
AUDIO AUDIO
SERIAL PORT IN
SERIAL PORT OUT
AUDIO OUTRLRL
RL
R
R
L
L
14
CONNECTING PROJECTOR
CONNECTING TO COMPUTER
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA/UXGA)
VGA Cable 
Monitor Output 
Desktop type Laptop type
Control Cable
for Serial Port
Audio Cable
(stereo) 
✽
Serial portPS/2 port...

15
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
ANALOG RGB
R/Pr G/Y B/Pb H/HV V
CONTROL PORTDV I
INPUT 1
R/C JACK
USB
RESET
(MONO)
(MONO)(MONO) (MONO)(MONO)
CONTROL PORT AUDIO
CONTROL PORT
S-VIDEO
VIDEO/YC
INPUT 2 INPUT 3 INPUT 4
AUDIO
AUDIO AUDIO
SERIAL PORT IN
SERIAL PORT OUT
AUDIO OUTRLRL
RL
R
R
L
L
Video Source (example)
Video Cassette Recorder
Video Disc Player
Video
Cable ✽
S-VIDEO 
Cable ✽
Audio Amplifier
Audio Speaker (stereo)
Audio Cable 
(Stereo) ✽
S-VIDEO Output
Audio Input
Cables used...

16
IMAGE BUTTON
Used to select image
level.  (P32, 37)
BEFORE OPERATION
MENU
AUTO PC ADJUST
IMAGE SELECTVOLUME
ZOOM FOCUS
LENS SHIFTON-OFFINPUT 1/2
INPUT 3/4
SIDE CONTROLS AND INDICATORS
Used to adjust zoom.
(P23)
INPUT 3/4 BUTTON
POWER ON–OFF BUTTONFOCUS BUTTONSVOLUME BUTTONS
Used to select input source
either INPUT 3 or INPUT 4.
(P26)
Used to adjust focus.  (P23)Used to adjust volume.
(P25)
Used to select an item or
adjust value in MENU.  It is
also used to pan image in
DIGITAL ZOOM mode.
(P34)
Used to...

17
BEFORE OPERATION
READYLAMP
LAMP
REPLACEWARNING
TEMP.
READY INDICATORLAMP INDICATORLAMP REPLACE INDICATOR
This indicator lights green
when a projector is ready to
be turned on.  And it
flashes green in Power
Management mode.  (P41)This indicator is dim when a
projector is turned on.  And
bright when a projector is in
stand-by mode.
INDICATORS
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(P43)
WARNING
TEMP. READY
LAMP
REPLACELAMP
FRONT INDICATORS...

18
BEFORE OPERATION
VOLUME
ON-OFF
FOCUS
ZOOM
D.ZOOM
MENUMUTE
LASER
KEYSTONENO SHOWFREEZE
AUTO PC ADJ.IMAGE
P-TIMER
LOCK
INPUT 1/2
INPUT 3/4
LENS SHIFT
OPERATION OF REMOTE CONTROL
ON
ALL OFF
ALL-OFF SWITCH
Left Side
When using Remote Control Unit,
turn this switch to “ON.”  And turn it
to “ALL OFF” when it is not used.
This Remote Control Unit emits a laser beam as laser pointer function from Laser Light Window.  When LASER button is
pressed, laser light goes on.  And when LASER button is being pressed...

19
To insure safe operation, please observe following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at same time.
Do not use a new battery with an used battery.
Avoid contact with water or liquid.
Do not expose Remote Control Unit to moisture, or heat.
Do not drop Remote Control Unit.
If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries.
Danger of explosion if battery is incorrectly replaced.
Dispose of used...

20
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU OPERATION
Display ON-SCREEN MENU
Press MENU button to display ON-SCREEN MENU (MENU
BAR).  A red frame is POINTER.
Move POINTER (red frame) to MENU ICON that you want to
select by pressing POINT RIGHT / LEFT buttons.
Adjust ITEM DATA by pressing POINT RIGHT / LEFT
buttons.
Refer to following pages for details of respective
adjustments.
Press POINT DOWN button and move POINTER (red frame
or red arrow) to ITEM that you want to adjust,...