Sanyo Plc Ef60 Projector User Manual

51
Menu
1
2
Setting
Setting
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
This feature allows you to change the On-Screen Menu setting.
Position
When Position is selected, arrows appear in upward, downward,
right and left directions on the screen.  Move the menu position
with the Control pad and fix it by pressing the SELECT button.
My menu
This feature enables you to customize...

52
Setting
Logo
Logo settings can be altered as follows:
Logo select
This function decides what to be displayed on the starting-up
display as follows:
Default  . . . .the factory-set logo
My logo  . . .the image you captured  
Off  . . . . . . .count-down only 
Capture
This function enables you to capture the image being projected
and use it for a starting-up display or interval of presentations.  
After capturing the projected image, go to the Logo function and
set it to “My logo”.  Then the captured...

53
Setting
PIN Code Change
Logo PIN code can be changed to your desired four-digit number.
Select PIN code change with the Control pad and press the
SELECT button.  Set a new Logo PIN code.  
Be sure to note the new Logo PIN code and keep it at hand.  If
you lost the number, you could no longer change the Logo PIN
code setting.  For details on PIN code setting, refer to relevant
instructions of the PJ Lock function on page 57.
Background
3 background settings are available in this projector.  Select one...

54
On start
When this function is “On,” the projector is automatically turned
on just by connecting the AC power cord to a wall outlet.
✔Note:
Be sure to turn the projector off properly (see “Turning Off the  Projector” on page
29).  If the projector is turned off in the wrong steps, the On start function does not
operate properly.
Setting
Display
This function decides whether to display On-Screen Displays.
On  . . . . .shows all the On-Screen Displays.
Off  . . . . .sets On-Screen Displays disappeared...

55
Setting
Analog out
The ANALOG OUT terminal is for output of the analog signal
coming from the ANALOG IN terminal in the Input 1 terminals.
(See page12.)
Select On to enable the signal output through the ANALOG OUT
terminal always except in the stand-by mode or Off to disable the
signal output.
Analog out  is not available when selecting the other Inputs except
Input 1.  Select Input 1 so that Analog out will be available.  (p31,
37)   
Lens memory
Lens memory feature enables you to store the lens...

56
Setting
Security
Key lock
This function locks operation from the top control and remote
control.  It is useful to prevent the projector from being operated
by an unauthorized person.  
Projector
 . . . . . . .locks operation from the top control.  To
unlock, use the remote control.  
Remote control  . .locks operation from the remote control.  To
unlock, use the top control.
Off  . . . . . . . . . . . .does not lock any operation.  To release lock,
select this.
If the top control accidentally becomes...

57
Setting
The PIN code can be changed to your desired four-digit
number.
Select PJ PIN code change with the Control pad, and press
the SELECT button.  The PIN code input dialog box will appear.
Enter a current PIN code, and then a new PIN code as follows:
Select a number with the Control pad and fix the number with
the SELECT button. Repeat it to complete entering a four-digit
number.  When the four-digit number is fixed, move the pointer
to Ent.  Then press the SELECT button.   To Change PJ PIN Code...

58
Setting
Factory default
This function returns all setting values to the factory default
settings except for those including: User logo, PJ PIN code, Logo
PIN code, Security setting, Lamp time, Filter time and PJ time. 
Select Factory default and
this box appears.  Select
[Yes], and the next box
appears. 
Factory default
Quit
Exits the Setting menu.
Select [Yes]
to activate it. 

59
Special 
customizes control functions: Lamp, Fan control, Filter, Auto PC adj., Test pattern, RS-
232C, and USB memory and displays Warning log. 
✔Note:
Be sure to reset the Lamp time only after replacing the lamp.
1
2
Press the MENU button to display On-Screen Menu.  Spin
the menu icons with the Control pad and press the SELECT
button when the SPECIAL icon comes right in front.
Move the yellow frame pointer with the Control pad to an
item which you want to select and then press the SELECT
button....

60
Special 
Auto PC adj.
Select On to enable the Auto PC adjust function and Off to
disable it.  Refer to page 31 and 41 for Auto PC adjust function.
Test pattern
Various test patterns are prepared in this projector allowing users
to test the projection.  Select one from the following twenty kinds
of patterns: Cross 1 (W), Cross 2 (R), Cross 3 (G), Cross 4 (B),
Cross 5 (M), Cross 6 (C), Cross 7 (Y), Gradation 1~4, Color, and
Flat 1~8.
To cancel the Test pattern, press the CANCEL button on the top
control...