Sanyo Plc Ef12nl Projector User Manual

21
Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV
equipment. Connect video output from AV equipment to these jacks using the BNC cables.
The video input can be connected 3 types of signals; “COMPOSITE VIDEO, Y/C SEPARATE VIDEO and COMPONENT
VIDEO {Y, Cb (B-Y), Cr (R-Y)}.
Set VIDEO SOURCE of each video input (VIDEO IN-1 or VIDEO IN-2) to input video matter. (Refer to VIDEO SOURCE
SELECT  operation on page 44).
The Video input includes an...

22
VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO
RL(MONO)AUDIO
VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO
RL(MONO)AUDIO
VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO
RL(MONO)AUDIO
VIDEO IN-1 VIDEO IN-2 MONITOR OUT
VIDEO EQUIPMENT
Video Cassette RecorderDVD Player 
Video Disc PlayerSatellite
TV Tuner
MONITORAUDIO
INPUT AUDIO
OUTPUT S-VIDEO
OUTPUT
S-VIDEO
INPUT
SPEAKERSAUDIO AMP.
Video Camera
Y
OUTPUT
(BNC) VIDEO
OUTPUT
(BNC)C
OUTPUT
(BNC)Cb (B-Y)
OUTPUT
(BNC)Cr (R-Y)
OUTPUT
(BNC)
Y
INPUT
(BNC) VIDEO
INPUT
(BNC)C
INPUT
(BNC)Cb (B-Y)...

23
BEFORE OPERATION
MENU MODE
AUTO IMAGE NORMAL SELECTVOLUME ZOOM FOCUS LENS SHIFT ON-OFF
5
697
12
11
10
13
14
8
15
TOP CONTROLS
FRONT INDICATORS
FRONT INDICATORS
TOP CONTROLS
READYLAMP
LAMP
REPLACEWARNING
TEMP.
1234
CONTROLS AND  INDICATORS 

24
BEFORE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
LAMP REPLACEMENT INDICATOR
Light is orange when the Lamp life draws to an end.
TEMPERATURE WARNING INDICATOR
Flashes red when internal projector temperature is too high.
READY INDICATOR
Light is green when projector lamp is ready to be turned on.
LAMP POWER INDICATOR
Light is dim when the projector is on.
Light is brightened when the projector is in stand-by mode.
VOLUME BUTTONS
Used to adjust volume.
ZOOM BUTTONS
Used to operate power zoom lens....

25
BEFORE OPERATION
OPERATION OF THE REMOTE CONTROL
LASER POINTER button
This remote control emits a laser beam light as the Laser
Pointer from the Laser Light Window.
When the LASER POINTER button is pressed, laser light goes
on: when the button is released, light goes off.
Laser light is emitted with the RED light indicating that the
laser beam is being emitted.
The laser emitted is a class laser; therefore, do not look into
the laser light window or shine the laser beam on yourself or
other people....

26
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
COMPUTER SELECT BUTTON
Used to select computer mode. (Computer 1 or Computer 2 Input)
VIDEO SELECT BUTTON
Used to select video mode. (Video 1 or Video 2 Input)
POWER ON/OFF BUTTON
Used to turn the projector on or off.
VOLUME BUTTONS
Used to adjust volume.
ZOOM BUTTON
Used to select power zoom lens adjust.
P-TIMER BUTTON
Used to operate the P-TIMER function.
FOCUS BUTTON
Used to select focus adjust.
FREEZE/NO SHOW BUTTON
Used to freeze on-screen image...

27
Remote Control Battery Installation
Using the Remote Control Unit
16.4
(5 m)
60° 60°
1
Remove the battery
compartment lid.
2
Slide the batteries into the
compartment.
3
Replace the compartment lid.
Note : For correct polarity (+ and -
terminal), be sure the battery
terminals are in contact with the
pins in the compartment.
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating range
for the remote control is about 16.4 (5m) and 60°front and...

28
BEFORE OPERATION
WIRED REMOTE JACK
When using the wired remote control, connect the remote
cable to this jack.
COMPUTER SELECT BUTTON
Used to select computer mode.
(Computer 1 or Computer 2 Input)
VIDEO SELECT BUTTON
Used to select video mode. (Video 1 or Video 2 Input)
POWER ON/OFF BUTTON
Used to turn projector on or off.
VOLUME BUTTONS
Used to adjust volume.
ZOOM BUTTONS
Used to operate power zoom lens.
FOCUS BUTTONS
Used to operate power focus system.
SOUND MUTE BUTTON
Used to mute sound.
LENS...

29
BEFORE OPERATION
60°
R/C JACKSERIAL PORT
OPENOPEN
Connect a remote control cable to R/C jacks located on the wireless/wired
remote control unit and the side of the projector.
60° The remote control unit can be used as wireless or wired remote control.
WIRED REMOTE
CABLE
1
Remove the battery
compartment lid.
2
Slide the batteries into the
compartment.
3
Replace the compartment lid.
Note : For correct polarity (+ and -
terminal), be sure the battery
terminals are in contact with the
pins in the...

30
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU
Display ON-SCREEN MENU
Press MENU button to display the ON-SCREEN MENU
(MENU BAR).  The red frame is the POINTER.
Select the ITEM by pressing SELECT (REAR CLICK)
button.  The dialog box of the ITEM appears.
Move the POINTER (red frame) to the ITEM ICON that
you want to select by pressing POINT RIGHT / LEFT
buttons.
Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT (REAR
CLICK) button.
Refer...