Sanyo Pdg Dxt10l Projector User Manual

							
1. Introduction 
2
o Introduction to the Projector 
Features you’ll enjoy: 
DLP projector with high resolution 
The combination of BrilliantColor™ and a six-segment colo r wheel (optional) offer a more true color reproduction. 
Installation Flexibility 
This projector has many useful functions such as powered lens shifting, ceiling and  rear projection, variety of extensive op-
tional powered lens with bayonet m ount with release button, etc. 
Multiple Interface Terminals 
The projector has several interface terminals that  can support various types of equipment and signals. 
Dual Lamp Control System 
The two-lamp control system offers high brightness, maintained lamp life and energy savings along with redundancy. The 
lamp control function offers brightness of the lamp can  be selected. The power management function also reduces power 
consumption and maintains lamp life. 
Simple Computer System Setting 
The projector has the Multi-scan system to conform to almost  all computer output signals quickly. Up to UXGA resolution 
can be accepted. 
Security Function 
The Security function helps you to ensure  security of the projector. With the Key lock function, you can lock the operation on 
the top control. PIN code lock functions  prevent unauthorized use of the projector. 
Multilanguage Menu Display 
Operation menu is available in 8 languages: English, German, French, Italian, Spanish, Swedish, Chinese, and Japanese. 
Multi-use Remote Control 
Use the remote control as wired or wireless.  Eight remote control codes are available. 
3W + 3W Stereo Speaker 
Built in 3W x 2 speakers are provided. 
Helpful Maintenance Functions 
The lamp and filter maintenance functions provide for bette r and proper maintenance of the projector. Easy maintenance 
cover is provided for lamp and color wheel replacement. 
Network-capable 
Through an optional Network Manager with serial por t in, you can operate and control the projector. 
Direct Power Off and On Start 
The Direct Power Off function allows the projector to be turned off (even when projecting an image) using a power strip 
equipped with a switch and a breaker. The On Start function a llows the projector to be turned on by supplied AC power. 
Note: 
Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projector 
and starting to display an image. Also, the power cord can be removed immediately after turning off the pro-
jector. On Start manual may differ slightly from the product. 
On Start eliminates the need to always use the POWER (ON/STANDBY) button on the rem\
ote control or 
projector cabinet. 
  
						

							
1. Introduction 
3 
p Part Names of the Projector 
Front-right view 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  IR receiver Receiver for IR signal from remote control 12 
2.  Lamp cover Remove cover to replace lamp or color wheel 99 
3.  Lens control panel  See Lens Controls 7 
4.  OSD control panel See OSD Controls and Status LEDS 8 
5.  I/O connector panel Connect various input devices 10 
6.  Intake vent Lamp cooling vent – do not obstruct — 
7.  Speakers Built-in stereo speakers — 
8.  Height adjuster Adjusts level of projector 6 
9.  Lens Remove lens cap before use — 
10.  Lens release button Press the release button before removing the lens — 
11.  Anti-Theft screw Prevent theft of the lens — 
12.  Intake vent and front 
filter 
Keeps the front fan free of dust  
– clean regularly for optimum performance  
– do not obstruct 
95 
Important: 
Grill openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not obstruct any of the grill 
openings.  
						

							
1. Introduction 
4
Top view 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  Lens control panel See Lens Controls 7 
2.  Right-hand speaker Right-hand speaker — 
3.  Lamp cover Remove cover to replace lamp or color wheel 99 
4.  Exhaust vent Exhaust vent – do not obstruct — 
5.  OSD control panel See OSD Controls and Status LEDS 8 
6.  Rear intake vent Rear cooling intake – do not obstruct — 
7.  Left intake vent Left-hand cooling intake – do not obstruct — 
8.  Left-hand speaker Left-hand speaker —  
						

							
1. Introduction 
5 
 
Carrying the Projector 
Always carry your projector by the handle. 
Before moving or carrying the projector, disconnect the power cable and any other cables that may be attached to it. 
When moving the projector or when the projector is not in use, cover the lens with the lens cap. 
To extend the projector handle, refer to the following guide. 
1. Stand the projector on its end with the control panels at the bottom. 
2. Lift the handle in the direction shown until it is fully extended. 
 
Note: 
Stand the projector on its end by lifting the cabinet. Do not use the ha\
ndle to place the projector upright. 
  
						

							
1. Introduction 
6
Bottom view 
 
ITEM LABEL DESCRIPTION SEE PAGES: 
1.  Height adjusters Adjust projection height 38 
2.  Intake vent Color wheel cooling vent – do not obstruct — 
3.  Front filter Keep the fan free of dust – clean regularly for optimum perform-
ance 95 
4.  Ceiling support holes Contact your dealer for information on mounting the projector on 
a ceiling — 
5.  Security chain  
opening Attach anti-theft device – see u Using the Physical Lock 54 
6.  Rear filter 
7.  Side filter 
Keep the fans free of dust – clean regularly for optimum per-
formance 95 
 
CAUTION 
 
With ceiling installation, use approved mounting hardware & M4 screws; maximum depth of screw: 12 mm; dis-
tance from ceiling/ wall: 20 cm (0.7 feet) for proper ventilation; distance from fluorescent lamps: at least 1 m (3 
feet) front and back of the projector. For permanent installations, follow local codes.  
						

							
1. Introduction 
7 
q Top Features 
Lens Controls 
 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  ZOOM Increase/decrease projected image size 44 
2.  UP CURSOR 
3.  RIGHT CURSOR 
4.  DOWN CURSOR 
5.  LEFT CURSOR 
Move image left, right, up, or down 
6.  FOCUS Focus the projected image 44  
						

							
1. Introduction 
8
OSD Controls and Status LEDs 
 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  MENU Open / Close the OSD 55 
2.  UP/ DOWN/ LEFT/ 
RIGHT BUTTONS Navigate and change settings in the OSD 55 
3.  
RIGHT CURSOR/ 
VOLUME 
INCREASE 
Increase volume 40 
4.  CANCEL Exit the On-Screen Display (OSD) 55 
5.  INPUT Change or select the input device 34 
6.  ON/STAND-BY 
Turn the projector on or off (main power switch must be turned 
on first). 
Press to place the projector in standby mode. 
39 
Green 
7.  LAMP 2 (LED) 
Flashing 
See Indicator Messages 102 
  
						

							
1. Introduction 
9 
ITEM LABEL DESCRIPTION SEE PAGE: 
Green 
8.  LAMP 1 (LED) 
Flashing 
See Indicator Messages 102 
Green 
Red 
Orange 
9.  WARNING (LED) 
Flashing 
See Indicator Messages 102 
Green 
Orange 10.  POWER (LED) 
Flashing 
See Indicator Messages 102 
11.  AUTO PC ADJ. Optimize image size, position, and resolution 10 
12.  SELECT Select or change settings in the OSD 55 
13.  
LEFT 
CURSOR/VOLUME 
DECREASE 
Decrease volume 40 
  
						

							
1. Introduction 
10
 
r Terminal Panel Features 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  COMPUTER 3 IN Connect the DVI-D cable (not supplied) from a computer 26 
2.  AUDIO IN 
(COMPUTER 3) Connect the audio cable (not supplied) from the input device — 
3.  AUDIO OUT Audio loop-thru — 
4.  MONITOR OUT Connect to a monitor — 
5.  R/C JACK Connect the remote to the projector 15 
6.  AUDIO IN 
(COMPUTER 2) Connect the audio cable (not supplied) from the input device — 
7.  
AUDIO IN 
[L(MONO)/R] 
(COMPONENT) 
Connect an RCA audio cables (not supplied) from the input de-
vice right and left channels — 
8.  SERIAL PORT IN Installation control 117 
9.  REMOTE IN For external control 117  
						

							
1. Introduction 
11 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
10.  SCREEN 
TRIGGER 
When connected to the screen  through a commercially available 
cable, the screen deploys automatically on start up of the projec-
tor. The screen retracts when the projector is powered off  
(see notes below) 
117 
11.  S-VIDEO Connect a commercially available S-video cable from a video 
device 29 
12.  POWER SWITCH Turn on/off the projector 41 
13.  AC IN Connect the supplied power cable 31 
14.  
AUDIO IN 
[L(MONO)/R] 
(VIDEO) Connect RCA audio cables (not supplied) from the input device 
right and left channels. This audi o jack is shared with S-Video 
input. — 
15.  VIDEO IN Connect a composite video cable  (not supplied) from a video de-
vice to the yellow RCA jack 30 
16.  COMPONENT IN 
(Y, Cb/Pb, Cr/Pr) Connect a component video enabled device 30 
17.  
COMPUTER 2 IN 
(R/Cr, G/Y, B/Cb, 
H, V) Connect RGBHV or Component signal from computer or com-
ponent video enabled device 30 
18.  COMPUTER 1 IN Connect a VGA cable (supplied) from a computer 26 
19.  AUDIO IN  
(COMPUTER 1) Connect the audio cable (not supplied) from the input device — 
20.  LAN Connect a LAN cable (not supplied) from a computer 26 
21.  SERVICE Connect the USB cable (not supplied) from a computer. For ser-
vice personnel only. — 
 
Note:  
y To use this feature, you must turn on the Screen Trigger function on the OSD. 
y Screen controllers are supplied and supported by screen manufacturers. 
y Do not use this jack for anything other than intended use. Connecting t\
he wired remote control to the 
Trigger mini jack causes damage to the remote control.