Sanyo Pdg Dxl100 Projector User Manual

20
English
User Controls
The Projector has a multilingual On Screen Display that allows 
you to make image adjustments and change a variety of set-
tings. The projector will automatically detect the source. 
How to operate
1. To open the OSD, press “MENU” on the Remote Control.
2.  When OSD is displayed, use      keys to select any item in the 
main menu. While making a selection on a particular page, press  
  key to enter sub menu.
3.  Use      keys to select the desired item in the sub menu and...

English
21
English
User Controls
Image 
(PC Mode)
 Image Mode
  There are many factory presets optimized for various types of im-
ages. Use the  or  to select the item. 
  Presentation: For computer or notebook.
  Movie: For home theater.
  sRGB: For standard color.
  Bright: For bright room.
  User: Memorize user’s settings.
  Brightness
 Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
 Contrast
  The contrast controls the degree of difference...

22
English
User Controls
 Fine Sync
  Eliminate flicker from the image displayed. Use the  or  to adjust 
the value. 
 White Peaking
  Use the white peaking control to set the white peaking level of 
DMD chip. 0 stands for minimal peaking, and 10 stands for maxi-
mum peaking. If you prefer a stronger image, adjust towards the 
maximum setting.  For a smooth and more natural image, adjust 
towards the minimum setting.
 Color Temp.
  Adjust the color temperature. At higher temperature, the screen 
looks...

English
23
English
User Controls
Image 
(Video Mode)
 Image Mode
  There are many factory presets optimized for various types of im-
ages. Use the  or  to select the item.
  Presentation: For computer or notebook.
  Movie: For home theater.
  sRGB: For standard color.
  Bright: For bright room.
  User: Memorize user’s settings.
  Brightness
 Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
 Contrast
  The contrast controls the degree of...

24
English
User Controls
 Tint
 Adjust the color balance of red and green.
  Press the  to increase the amount of green in the image.
  Press the  to increase the amount of red in the image.
 Sharpness
 Adjust the sharpness of the image.
  Press the  to decrease the sharpness.
  Press the  to increase the sharpness.
 White Peaking
  Use the white peaking control to set the white peaking level of 
DMD chip. 0 stands for minimal peaking, and 10 stands for maxi-
mum peaking. If you prefer a stronger...

English
25
English
User Controls
Screen
 Keystone
  Adjust image distortion caused by tilting projector.
 H-position (Horizontal Position)
  Press the  to move the image left.
  Press the  to move the image right.
 V-position (Vertical Position)
  Press the  to move the image down.
  Press the  to move the image up.
 Aspect Ratio
 Use this function to choose your desired aspect ratio.
    4:3 
      This format is for 4:3 input sources not enhanced for Wide-
screen TV. 
    16:9
     This format is...

26
English
User Controls
 Mounting
    Front-Desktop
    The factory default setting.
    Rear-Desktop
      When you select this function, the projector reverses the image 
so you can project behind a translucent screen.
    Front-Ceiling
      When you select this function, the projector turns the image 
upside down for ceiling-mounted projection.
   Rear-Ceiling
      When you select this function, the projector reverses and turns 
the image upside down at same time. You can project from be-
hind...

English
27
English
User Controls
 Input Search
  When this function is turned “On”, the projector will search for 
other signals if the current input signal is lost. When this function is\
 
turned “Off”, it will only search a specified connection port.
 Fan Control
 
Choose “On” to turn on Fan Control mode. Operate the fan at full 
speed continuously to allow for proper high altitude cooling of the 
projector.
 Lamp Life Reminder
    Choose this function to show or to hide the lamp end of life warning...

28
English
User Controls
 Eco Standby Power (

English
29
English
User Controls
   Volume:
  ■   Press the  to decrease the volume.
  ■   Press the  to increase the volume.
 Lamp Counter Reset
 Reset the lamp life hour after replacing a new lamp. 
 Security Settings
  Security Settings:
 ■   On: Choose “On” to enable security verification when turning on 
the projector.
 ■   Off: Choose “Off” to be able to switch on the projector without 
password verification.
  Change Password:
 ■   First Time:
1.  Press “ENTER” to set the password.
2.  Use...