Sanyo Pdg Dwl100 Projector User Manual
Have a look at the manual Sanyo Pdg Dwl100 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
English
55
English
Appendices
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countr\
ies and
do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and compo-
nents which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accu-
mulators, at their end-of-life, should be disposed of separately from your household
waste.
Note:
If a chemical symbol...](http://img.usermanuals.tech/thumb/67/95856/w64_sanyo-pdg-dwl100-manual_d-55.png "Page 56
English
55
English
Appendices
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countr\
ies and
do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and compo-
nents which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accu-
mulators, at their end-of-life, should be disposed of separately from your household
waste.
Note:
If a chemical symbol...")
![Page 59
58
English
Appendices
Status Read Command
Format
The command is sent from PC to the projector with the format below;
‘CR’ [Command] ‘CR’
Command: one character (refer to the command table below.
■ The projector decodes the command and returns the ‘Character
string’ with the format below;
CommandFunctionProjectorReturnProjector status
CR0Status Read
00Power ON
20Cooling Down
10 Power Failure
28Cooling Down due to Abnormal Temperature in process
21Cooling Down in process after Off due to lamp failure...](http://img.usermanuals.tech/thumb/67/95856/w64_sanyo-pdg-dwl100-manual_d-58.png "Page 59
58
English
Appendices
Status Read Command
Format
The command is sent from PC to the projector with the format below;
‘CR’ [Command] ‘CR’
Command: one character (refer to the command table below.
■ The projector decodes the command and returns the ‘Character
string’ with the format below;
CommandFunctionProjectorReturnProjector status
CR0Status Read
00Power ON
20Cooling Down
10 Power Failure
28Cooling Down due to Abnormal Temperature in process
21Cooling Down in process after Off due to lamp failure...")
![Page 61
60
English
Appendices
4. Type the commands, refer to right
table, to control the projector and
then press “Enter” key for termina-
tion. For example, type “C00” which
is a command to turn on the projec-
tor, and press “Enter” key. Confirm
the projector is turning on.
To disconnect the communication,
press “Ctrl” key and “]” key at the
same time, type “close” and then press
“Enter” key on the Keyboard.
> close [return]
The table right shows the typical com-
mand lists for controlling this...](http://img.usermanuals.tech/thumb/67/95856/w64_sanyo-pdg-dwl100-manual_d-60.png "Page 61
60
English
Appendices
4. Type the commands, refer to right
table, to control the projector and
then press “Enter” key for termina-
tion. For example, type “C00” which
is a command to turn on the projec-
tor, and press “Enter” key. Confirm
the projector is turning on.
To disconnect the communication,
press “Ctrl” key and “]” key at the
same time, type “close” and then press
“Enter” key on the Keyboard.
> close [return]
The table right shows the typical com-
mand lists for controlling this...")
60 English Appendices 4. Type the commands, refer to right table, to control the projector and then press “Enter” key for termina- tion. For example, type “C00” which is a command to turn on the projec- tor, and press “Enter” key. Confirm the projector is turning on. To disconnect the communication, press “Ctrl” key and “]” key at the same time, type “close” and then press “Enter” key on the Keyboard. > close [return] The table right shows the typical com- mand lists for controlling this projector and please consult your local dealer for further information of another com- mands. Enter with ASCII 64-byte capital char-acters and one-byte characters. Note Command list table CommandFunction C00POWER ON C01POWER OFF (Immediate POWER OFF) C09Volume + C0AVolume - C0BSOUND MUTE ON C0CSOUND MUTE OFF C0FAspect 4:3 C10Aspect 16:10 C1CMENU ON C1DMENU OFF PJLink Notice This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all com- mands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. ProjectorPJLink InputInputParameter Computer 1RGB 111 YPbPr 1RGB 212 SCARTRGB 313 Computer 2RGB 414 YPbPr 2RGB 515 VideoVIDEO 121 S-VideoVIDEO 222 HDMIDIGITAL 131 PJLink is a registered trademark of JBMIA and pending trademark in some countries. During the standby mode status, the projec-tor responds to “Power On” through RS232/PJLink/Telnet com-mands. Note
English 61 English Appendices Dimensions 3° Max. 5.07/128.92mm 1.52/38.70mm 11.51/292.29mm 2.59/65.70mm9.93/252.30mm 12.06/306.53mm Lens Center 4.99/126.70mm 4.06/103.10mm 4.06/103.10mm 0.74/18.80mm 4.75/120.54mm 2.55/64.67mm 4.74/120.54mm 0.47/11.89mm 4.70/119.50mm 4.13/105.00mm Screw Holes for Ceiling Mount Screw: M4 Depth: 0.47”/12.0mm