Sanyo Pdg Dwl100 Projector User Manual

							30
English
User Controls
 Network Status
 
Display the network connection status.
 DHCP
 
Display the network connection status.
   On: Assign an IP address to the projector from the DHCP server 
automatically.
   Off: Assign an IP address manually.
 IP Address
 
Select an IP address.
 Subnet Mask
 
Select subnet mask number.
 Gateway
 Select the default gateway of the network connected to the projector.
 DNS
 Select DNS number.
 Apply
 Press “ENTER” button to apply the selection.
Setting/Network 
						

							English
31
English
User Controls
 Language
 
Choose the multilingual OSD. Press  into the sub menu and then 
use the  or  or  or  key to select your preferred  
language. Press “ENTER” to finalize the selection. 
Language
 Information
 To display the projector information on the screen.
Information
In the first instance of powering on the projector, the language menu is displayed to select the default lan-guage. All subsequent operations assume the selected default language.
Note 
						

							32
English
User Controls
1. Fill in a new IP, a subnet mask, a gateway and a DNS in the 
dialogue box.
2. Then choose apply and press “ENTER” button to effectuate the 
configuration process.
3. Open your web browser and type in the IP address, it has entered 
LOGIN mode. 
4. Input the user name and password then press “LOGIN” button 
on the screen, the web page will display as below:
5. Open “Control Panel” to control your projector. 
 
Controlling the Projector From Web
Configuring the Network Setting
When you used the projector IP address, you will can not link to your service server.
Note
(1)  User name:user /Password:user 
(2)  User name: admin-istrator / Password: admin
Remark: Only admin-istrator could enter the Network setting and alert setting.
Note
If the Netscape user wants to control the projector from the web, the user needs to use Netscape 9.X or upgrade version.
Note 
						

							English
33
English
User Controls
For example:  Use Microsoft Internet 
Explorer (IE) web browser 
to control the projector, 
the IP address is http: // 
192.168.0.100.
Step 1: Find an IP Address (192.168.0.250) 
from LAN function of projector.
Step 2: Select apply and press “ENTER” 
button to submit function or press 
“MENU” key to exit.
Step 3: To open Network Connections, 
click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks , click Change settings of this connection.
Step 4: On the General tab, under This 
connection uses the following 
items, click Internet Protocol 
(TCP/IP), and then click 
“Properties.”
Step 5: Click Use the following IP 
address, and type in as below:
1) IP address: 192.168.0.250 
2) Subnet mask: 255.255.255.0
3) Default gateway: 168.0.254.192
Step 6: To open Internet Options, click 
IE web browser, click Internet Options, click the Connections tab and click “LAN Settings...” 
 
Step 7: The Local Area Network (LAN) 
Setting dialog box appears, In 
the Proxy Server area, cancel the Use a proxy server for your LAN check box., then click “OK” button 
twice.
Step 8: Open your IE and type in the IP 
address of 192.168.0.250 in the 
URL then press “ENTER” key. 
It has entered LOGIN mode as 
below:
1)  User name: user / Password: user
2)  User name: administrator / 
Password: admin
Note Only administrator could enter the 
Network setting and alert setting. 
						

							34
English
User Controls
Step 9: The web page will display as below:
Step 10: Open “Control Panel” to control 
your projector. 
						

							English
35
English
User Controls
Home Page
Access the Projector Web Server by entering the projector’s IP addres\
s 
at the web browser. The Home Page displays basic information about 
the projector.When Home page display error status, it indicates the lamp 
failed. Stop using the projector and 
disconnect the power cable from the electrical outlet, then contact your local dealer or our 
service center. 
Note 
						

							36
English
User Controls
Control Panel Page
This page allows you to manage the projector status using a Web 
browser.
How to operate Control Panel page
   Button setting: Action.
   Text box setting: Enter a number or text and then click “Set” but-
ton. Or Change a value with “-” or “+” button.
   Pull-down menu setting: Select an item with pull-down menu but-
ton and then click “Set” button.
   Radio button setting: Select an item by selecting a radio button.
The value in the text box indicates current value.
Note
Each item has a valid setting range. The set-ting value exceeding this becomes invalid. Some control items can not be used depending on the selecting input mode or functions of the projector you use. In this case, the values of those items are indi-
cated with “---”.
Note 
						

							English
37
English
User Controls
Network Setting Page
This page allow you to enable or disable DHCP and set network re-
lated addresses and names.
 Projector Setting
  Allows you to define the group name and projector name of the 
projector. (Maximum characters: 12).
 Network Setting
    Choose DHCP to assign an IP address to the projector from a 
DHCP server automatically, or Manual to assign an IP address 
manually.
   Network function setting, Refer to the “Network” section on page 
30 for more information.
  Password Setting
    This projector provides a security function that allows the admin-
istrator or user to manage usage for the projector. When enabling 
password for the first time, set the password before enabling it. 
When the password function is enabled, the administrator or user 
password will be required for accessing the Web Server.
   New Password: Enter new password.
   Confirm Password: Enter password again and submit. 
						

							38
English
User Controls
Security Setting Page
This page allow you control the projector by using the telnet or PJLink \
application installed on your computer.
   New Password: Enter new password.
   Confirm Password: Enter password again and submit.
  Telnet Password Setting
  Only a four-digit number is valid for the telnet password.
  The default Telnet Password as [0000], which means no password is 
set.
  When you connect the projector to the network, it is recommended 
to set a new password.
  If the password has been set on this Security Setting Page, the au-
thentication is required to use the Telnet.
 PJLink Password Setting
  1 to 32 alphanumeric characters can be used for the password.
  The default PJLink Password is vacant, which means no password 
is set. 
						

							English
39
English
User Controls
Alert Setting Page
 Email Setting
  E-mail Alert: You can set whether to be notified by email (Enable) or 
not (Disable).
  To/CC/From: You can enter email address of sender (From) and 
recipients (To/Cc) to receive notification when an abnormality or 
warning occurs.
  Subject: You can enter the subject line of the email.
Click the “Email Alert Test” button to test the e-mail alert setti\
ngs.
 SMTP Setting
    SMTP server, User name and Password should be provided by 
your network administrator or MIS.
 Alert Condition
    You can select the abnormalities or warnings to be notified by 
email. Select items by ticking on check boxes. When any of the alert 
conditions occur, an email will be sent to the recipients (To/Cc). 
Click the “Submit” button to apply the selection.