Sanyo Lp Xf1000 Projector Specifications

							III}Specifications 
Product Number   
LP-XF1000¢K£ 
System  RGB liquid crystal shutter projection system 
Size  1.8 inch x 3, Aspect Ratio 4:3 LCD 
Panel 
Pixel Count  786,432 (1024 x 768) x 3, Total pixels 2,359,296 
Color Control Device  1 
Projection Lens  Option 
Light Source  330W NSHA x 2 
Screen Size 
(Projection Distance) 40” – 600” (Projection distance varies depending on the lens) 
Color Reproducibility  Full color (1.07 billion colors) 
Contrast Ratio 
(Full On/Full Off)*1 4000:1
*2 
Brightness*1 12,000 lumens*3 
Uniformity 90% 
Scanning Frequency Horizontal: 15 - 120kHz, Vertical: 48 - 120Hz, Dot Clock: 230 MHz or less 
(analog) 
Resolution 
(when using RGB signal) 1024 x 768 dots (WUXGA dot resizing possible) 
Te r m i n a l s  Input 1: DVI-D (HDCP)/RGB (D-sub15) 
Input 2: RGBHV/VIDEO/Y, Pb/Cb, Pr/Cr (BNC x 5), S-video (Mini DIN4) 
Input 3: for optional board 
Input 4: for optional board 
Control Terminal 
RS232C In / Out (D-sub 9 x 2) 
Other Terminal  Wired remote control (Mini jack) 
Color System  PAL/SECAM/NTSC/NTSC4.43/PAL-M/ PAL-N 
Operating Temperature  5 - 40°C 
Power Consumption 940W¢Normal£/770W(Eco) 
Standby: 17W 
Power Source 
AC 100V ¢±10%£, 50/60Hz 
Dimensions  530.0 mm (w) x 268.0 mm (h) x 757.0 mm (d) 
Weight  27.6kg (Not including lens) 
Main Accessories Removable power cord x1 
Power plug adaptor 
D-sub 15 cable x1 
List of customer service centers 
Warranty 
PIN code-locking seal 
Owner’s manual 
Remote control x1 (AA battery x 2) 
*1 Figures shown are as of the time of shipping, and listed in accordance with pattern for data projectors JIS X 6911:2003. 
Measurement method/conditions are based on Appendix 2. 
*2 When Lamp Mode “Auto” is selected. 
*3 When LNS-S03 is used.  
						

							* All product names and company names are trademarks or registered trademarks of their respective companies. 
* Product appearance and specifications are subject to change without notice.