Samsung Ud46e-p Manual

							41
Connecting an External Monitor
 •Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
 ―
Connecting parts may differ in different products.
 ―The DP OUT (LOOPOUT) port is only available when the input source is PC, DVI , HDMI1, HDMI2 (PC connection), DisplayPort, MagicInfo or MagicInfo S.
 ―
When you play content using Player (MagicInfo S) on the home screen, Loopout is supported only for images. It is not supported for voice.
DP IN
DP IN
DP OUT
(LOOPOUT )
RGB IN
DVI IN 
(MAGIC INFO)
HDMI IN 1, HDMI IN 2                  
						

							42
Connecting to a Video Device
 •Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
 •You can connect a video device to the product using a cable.
 ―
Connecting parts may differ in different products.
 ―Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV / COMPONENT
 
AUDIO IN
Connection Using the component Cable
AV / COMPONENT
 
AUDIO IN      
						

							43
Connection Using an HDMI-DVI Cable
 ―Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.
 ―After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the settings as shown below to enable the video and audio from the video device.
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
 ― Sound → set HDMI Sound to AV(HDMI)
 ―Picture → set each screen mode to Videos/Images under Picture Mode
 ―System  → General → set HDMI Hot Plug to On
 ―
Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN 1, HDMI IN 2
AUDIO IN
HDMI
DVI IN 
(MAGIC INFO)     
						

							44
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
 •For better picture and audio quality, connect to a digital device using an HDMI cable.
 •
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
 -To connect the product to a digital device that does not support HDMI output, use an HDMI-
DVI and audio cables.
 •
The picture may not display normally (if at all) or the audio may not work if an external device that 
uses an older version of HDMI mode is connected to the product. 
If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, 
if out of date, request an upgrade.
 •Be sure to use an HDMI cable with a thickness of 14 mm or less.
 •Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection 
error may occur.
 •A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
HDMI IN 1, HDMI IN 2
Connecting to an Audio System
 ―
Connecting parts may differ in different products.
AUDIO OUT    
						

							45
Connecting the LAN Cable
 ―Connecting parts may differ in different products.
RJ45
 • Use Cat7(*STP Type) cable for the connection. 
*Shielded Twist Pair.   
						

							46
Changing the Input source
Source
SOURCE → Source  
Source
MagicInfo S
HDMI1 HDMI2 Component
AV
PC
To go to Options, press and hold the Enter button.
 -
The displayed image may differ depending on the model.
Source  allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen 
of the selected source.
 ― The input source can also be changed by using the SOURCE button on the remote control.
 ―The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
 ―To view detailed information about connected source devices, press the  TOOLS button from the Source page.
Edit Name
SOURCE → Source  → TOOLS → Edit Name → ENTER E
Customize the name of a connected external device. 
 ― The list can include the following source devices. Source  devices on the list differ depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD  / VCR / AV Receiver / Camcorder / DVI PC / DVI 
Devices / TV  / IPTV / HD DVD / DMA
Information
SOURCE → Source  → TOOLS → Information → ENTER E
You can see detailed information about the selected external device.                
						

							47
Using MDC
MDC Programme Installation/Uninstallation
Installation
 ―MDC installation can be affected by the graphics card, mother board and network conditions.
1 Click the MDC Unified installation programme.
2 Select a language for installation. Next, click "OK".
3 When the " Welcome to the InstallShield Wizard for MDC_Unified " screen appears, click "Next".
4 In the "License Agreement" window displayed, select  
"I accept the terms in the license agreement" and click "Next ".
5 In the displayed "Customer Information" window, fill out all the information fields and click 
"Next".
6 In the displayed "Destination Folder" window, select the directory path you want to install the 
programme in and click "Next ".
 ―
If the directory path is not specified, the programme will be installed in the default directory 
path.
7 In the displayed "Ready to Install the Program" window, check the directory path to install the 
programme in and click "Install".
8 Installation progress will be displayed.
9 Click "Finish" in the displayed "InstallShield Wizard Complete" window.
 ― Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.
10 The MDC Unified shortcut icon will be created on the desktop after installation.
 ―The MDC execution icon may not be displayed depending on the PC system or product 
specifications.
 ― Press F5 if the execution icon is not displayed.
Uninstallation
1 Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2 Select MDC Unified from the list and click Change/Remove.
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
- For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme is available on the website.
Chapter  04  
						

							48
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
RS232C IN RS232C OUT
Monitor 1
Monitor 2
Computer    
						

							49
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
 ―Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
RJ45
HUB
Monitor 1
Monitor 2 Computer  
						

							50
Connection using a cross LAN cable
 ―Multiple products can be connected using the RS232C IN / OUT port on the product.
Monitor 1
Monitor 2
Computer
RS232C OUT
RJ45