Samsung Ud46e-p Manual
Have a look at the manual Samsung Ud46e-p Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
151 Available buttons and features during music playback •Pause / Play Pause or play music. •Rewind / Fast Forward Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select 0098 twice. • Previous / Next To play the previous music file, select 028E twice. Selecting 028E once will play the current music from the beginning. To play the next music file, select \202. • Repeat Configure Repeat mode. Repeat One plays the current music file repeatedly. Repeat All plays all files in a folder repeatedly. •Shuffle Enable or disable shuffle playback mode.
152 Supported Subtitle and Media play file formats Subtitle ExternalInternal • MPEG-4 timed text (.ttxt) •SAMI (.smi) • SubRip (.srt) •SubViewer (.sub) •Micro DVD (.sub or .txt) •SubStation Alpha (.ssa) •Advanced SubStation Alpha (.ass) • Powerdivx (.psb) •Xsub Container: AVI •SubStation Alpha Container: MKV • Advanced SubStation Alpha Container: MKV •SubRip Container: MKV • MPEG-4 timed text Container: MP4 Supported image resolutions File Extension TypeResolution *.jpg, *.jpeg JPEG15360 x 8640 *.png PNG1920 x 1080 *.bmp BMP1920 x 1080 *.mpo MPO15360 x 8640
153 Supported music file formats File ExtensionTypeCodecComments *.mp3 MPEGMPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4AAC *.flac FLACFLACThe Seek ( jump) function is not supported. Supports up to 2 channel Supported Video Formats • Video content will not play, or not play correctly, if there is an error in the content or the container. •Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. •If the Index Table is in error, the Seek (Jump) function is not supported. •You may experience file stuttering while playing a video through a network connection. •The menu may take longer to appear if the video’s bit rate exceeds 10Mbps. •Some USB/digital camera devices may not be compatible with the player. Video Decoder Audio Decoder Supports up to H.264, Level 4.1 H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. For all Video codecs except MVC, VP8, VP6: • Below 1280 x 720: 60 frame max •Above 1280 x 720: 30 frame max GMC 2 over is not supported. Supports only BD MVC Spec. Supports up to WMA 10 Pro 5.1 channel. WMA lossless audio is not supported. QCELP, AMR NB/WB are not supported. If Vorbis is only in Webm container, supports up to 2 channel.
154 File ExtensionContainer Video Codec ResolutionFrame rate (fps) Bit rate (Mbps)Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.divxAVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.x / 6.x 1920 x 10806~30 30AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core G.711(ALaw,μ-Law) MPEG4 SP / ASP H.264 BP / MP / HP Motion JPEG Window Media Video v9 MPEG2 MPEG1 VP6 640 x 480 4 MVC 1920 x 108024 / 25 / 30 40 *.webmWebM VP8 6 ~ 308Vorbis
155 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Testing the Product Check if your product is operating normally by using the product test function. If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing. 1 Power off both the PC and product. 2 Disconnect all the cables from the product. 3 Power on the product. 4 If No Signal is displayed, the product is operating normally. Checking the Resolution and Frequency Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected (refer to Supported Resolutions). If the screen remains blank, check the PC system, video controller and cable. Chapter 13
156 Check the followings. Installation issue (PC mode) The screen keeps switching on and off.Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC.The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the screen size in the HDMI or DVI settings for the graphics card. If the graphics card settings menu does not have an option to adjust the screen size, update the graphics card driver to the latest version. (Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings.) PC is shown in Source when a PC is not connected.PC is always shown in Source irrespective of whether or not a PC is connected. Screen issue The power LED is off. The screen will not switch on.Make sure that the power cord is connected. No S ignal is displayed on the screen.Check that the product is connected correctly with a cable. Check that the device connected to the product is powered on. N ot O ptimum Mode is displayed.This message is displayed when a signal from the graphics card exceeds the product's maximum resolution and frequency. Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications. The images on the screen look distorted.Check the cable connection to the product
157 Screen issue The screen is not clear. The screen is blurry.Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky.Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Then, change the screen settings if required by referring to the Additional Information on the product menu and the Standard Signal Mode Table. There are shadows or ghost images left on the screen. The screen is too bright. The screen is too dark. Adjust Brightness and Contrast. Screen colour is inconsistent.Go to Picture and adjust the Colour Space settings. White does not really look white.Go to Picture and adjust the White Balance settings. There is no image on the screen and the power LED blinks every 0.5 to 1 second.The product is in power-saving mode. Press any key on the keyboard or move the mouse to return to the previous screen. The product will turn off automatically.Go to System and make sure Sleep Timer is set to Off. If a PC is connected to the product, check the power status of the PC. Make sure the power cable is connected properly to the product and power outlet. If the signal from a connected device is not detected, the product automatically turns off after 10 to 15 minutes. Picture quality of the product is different from the dealer shop where it was purchased.Use an HDMI cable to obtain high-definition (HD) picture quality.
158 Screen issue The screen display does not look normal.Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in a sports event or action video. Low signal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone within a distance of one-meter radius may cause static on analogue and digital products. The brightness and colour do not look normal.Go to Picture and adjust the screen settings such as Picture Mode, Colour, Brightness and Sharpness. Go to System and adjust the Energy Saving settings. Reset the screen settings to the default settings. Broken lines are displayed on the edges of the screen.If Picture Size is set to Screen Fit, change the setting to 16:9. Lines (red, green or blue) are displayed on the screen.These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a Samsung Service Centre to resolve the issue. The display looks unstable and then freezes.The screen may freeze when a resolution other than the recommended resolution is used or if the signal is not stable. To resolve the issue, change the PC resolution to the recommended resolution. The screen cannot be displayed in full screen.A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen. A video with an aspect ratio different from the product can cause black bars at the top and bottom of the screen. Change the screen size setting to full screen on the product or source device. Sound issue There is no sound.Check the connection of the audio cable or adjust the volume. Check the volume.
159 Sound issue The volume is too low.Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software programme. Video is available but there is no sound.If an HDMI cable is connected, check the audio output settings on the PC. If a source device is used •Make sure the audio cable is properly connected to the audio input port on the product. •Check the audio output settings for the source device. (For example, if an HDMI cable is connected to the monitor, the audio setting for the cable box may need to be changed to HDMI.) If a DVI-HDMI cable is used, a separate audio cable is required. If the product has a headphone port, make sure nothing is connected to it. Reconnect the power cable to the device and then reboot the device. There is static coming from the speakers.Check the cable connection. Make sure a video cable is not connected to an audio input port. Check the signal strength after connecting a cable. Low signal level can cause corrupted sound. There is audible sound when the volume is muted.When Speaker Settings is set to External, the volume button and mute function are disabled. Adjust the volume for the external speakers. Audio settings for main speakers are separate from the internal speakers on the product. Changing or muting the volume on the product does not affect an external amplifier(decoder). There is an echo sound coming from the speakers.Different decoding speeds between the product speakers and external speakers can cause an echo. In this case, set Speaker Settings to External.
160 Remote control issue The remote control does not work.Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity. Source device issue A beeping sound is heard when my PC is booting.If a beeping sound is heard when your PC is booting, have your PC serviced.