Samsung Ud46e-p Manual

							121
Standby  Control
You can set the screen standby mode to be applied when an input signal is received.
 •
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
 •Off
The message No Signal will appear if no input signals are detected.
 ―
The Standby Control option is only enabled when Source  is set to PC, DVI, HDMI1, HDMI2 or DisplayPort.
 ―
If No Signal is displayed although a source device is connected, check the cable connection.
 ―If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On .
 •
On
Power-saving mode will activate if no input signals are detected.
Power  B utton
The power button can be set to either turn on the power or turn on/off the power.
 •
Power on only: Set the power button to turn on the power.
 •
Power on and off: Set the power button to turn on/off the power.
Network  Standby
This feature keeps the network power on when the product turns off.
 •
Off / On
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Network Standby
Off
On
Auto
Power on only Off
 -The displayed image may differ depending on the model.  
						

							122
Eco  S olution
MENU m → System  → Eco Solution → ENTER E
Eco Solution
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
Off
Off
Off
Off
4 hours
 - The displayed image may differ depending on the model.
Energy  Saving
Reduce the power consumption by adjusting the screen brightness.
 •
Off / Low  / Medium / High
Eco  S ensor
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
 •
Off / On
 ―
Adjusting the High setting under Picture while Eco Sensor is on will disable the Off.
Min. B acklight
When Eco Sensor is On , you can manually adjust the minimum screen brightness. Min. Backlight is the darkest backlight 
mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
 ― If Eco Sensor is On , the display brightness may change (become slightly darker or brighter) depending on the surrounding 
light intensity. 
S creen  Lamp  Schedule
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
 •
Off / On  
						

							123
Eco Solution
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
Off
Off
Off
Off
4 hours
 - The displayed image may differ depending on the model.
No S ignal  Power  O ff
Save power by turning the device off when no signal is received from any source.
 •
Off / 15 min / 30 min / 60 min
 ―
Disabled when an attached PC is in power saving mode.
 ―The product will automatically power off at a specified time. The time can be changed as required.
Auto  P ower  O ff
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel 
within select hours to prevent overheating.
 •
Off / 4 hours / 6 hours / 8 hours
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77
C.
The recommended operating temperature for this product is 75 to 80C (based on an ambient temperature of 40C).
 ― The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature 
continues to rise, the product will power off to prevent overheating.
T emperature  Control
MENU m → System  → Temperature Control → ENTER E
System
Temperature Control 77
 -
The displayed image may differ depending on the model.  
						

							124
Device  Manager
MENU m → System  → Device Manager → ENTER E
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
 -
The displayed image may differ depending on the model.
Configure options for external input devices connected to the product.
Keyboard  Settings
Connecting a keyboard to the product displays the Keyboard Settings menu.
S elect K eyboard
Select a keyboard you want to use from the available connected keyboards.
 ―
It is possible to use only one connected keyboard.
Keyboard O ptions
 ―
Depending on the country.
Keyboard  Language
Specify the keyboard input language.
K eyboard  type
Specify the keyboard type.
Switch  Input  Language
Configure the key combination used to change the input language.  
						

							125
Mouse Settings
Connecting a mouse to the product displays the Mouse Settings menu.
S elect M ouse
Configure mouse connection settings or options for connected mouse devices.
 ―
Among connected mouse devices, only one mouse can be used.
Mouse O ptions
 ―
Depending on the country.
Primary  Button
Select a button on the mouse that will perform basic functions (click and enter).
 •
Left (default) / Right
Pointer  Speed
Set the mouse pointer speed.
 •
Slow  / Standard / Fast
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
 -
The displayed image may differ depending on the model.  
						

							126
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
 -The displayed image may differ depending on the model.
Pointer  Settings
Specify the pointer size, speed and shape.
P ointer Size
Specify the pointer size.
 •
Small / Medium / Large / Extra Large
Pointer Speed
Specify the pointer speed. A higher speed increases the pointer sensitivity.
 •
Slow  / Standard / Fast
Pointer I mage
Specify the pointer shape.
 •
Image 1 ~ Image 10  
						

							127
Play  via
MENU m → System  → Play via → ENTER E
System
Play via MagicInfo
 -
The displayed image may differ depending on the model.
Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
 • MagicInfo / URL Launcher
Change  PIN
MENU m → System  → Change PIN → ENTER E
System
Change PIN
 -
The displayed image may differ depending on the model.
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
When the Confirm screen disappears, press the Close button. The product has memorised your new PIN.
 ―
Default password: 0 - 0 - 0 - 0  
						

							128
Security
MENU m → System  → Security → ENTER E
· 
Security
Safety Lock
Button Lock
USB Auto Play Lock
Mobile Connection LockPower On Button
Off
Off
Off
Off
Off
 -
The displayed image may differ depending on the model.
Safety  Lock
 ―
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
 • Off / On
All the menus and buttons of the product and remote control, except for the  LOCK button on the remote control, will be 
locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 - 0).
P ower  On Button
Turn on this feature to enable the remote control's Power button to turn on the device while  Safety Lock is enabled.
 •
Off / On
Button  Lock
This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On .
 •
Off / On  
						

							129
· 
Security
Safety Lock
Button Lock
USB Auto Play Lock
Mobile Connection LockPower On Button
Off
Off
Off
Off
Off
 -
The displayed image may differ depending on the model.
USB  Auto  P lay  L ock
Select whether to automatically play MagicInfo content saved on a connected USB device.
 •
Off
Play MagicInfo content saved on the USB device automatically.
 •On
Do not play MagicInfo content saved on the USB device automatically.
 ―
Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock : On " for five seconds.
Mobile Connection  Lock
Restrict other devices on your network, such as smart phones and tablets, to share content with your signage.
 •
Off / On  
						

							130
General
MENU m → System  → General → ENTER E
General
Smart Security
BD Wise
Anynet+ (HDMI-CEC)
HDMI Hot Plug
DivX
® Video On Demand
Game Mode On
On
On
On
Off
 - The displayed image may differ depending on the model.
Smart  Security
The security provided to protect your display device and connected storage devices against viruses includes.
Smart S ecurity
Use this option to turn Smart Security protection On/Off.
 •
Off / On
Scan
Inspect your display device and connected storage devices to check for viruses.
Isolated List
This is the list of items that have been Isolated for containing viruses.
A llowed List
This is the list of items that have been Allowed as not containing viruses.
Settings
Set the Smart Security options.
A uto  S can
Scans automatically when the display device is turned on.
 •
Off / On
Move  to  I solated  List  automatically
Moves viruses to the Isolated List automatically.
 •
Off / On