Samsung Ud46e-p Manual

							131
BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support  BD Wise. When BD 
Wise is turned On , the picture mode is automatically changed to the optimal resolution.
 •
Off / On
 ―
Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
 ―The BD Wise function is enabled only when a source device with the BD Wise function is connected.
General
Smart Security
BD Wise
Anynet+ (HDMI-CEC)
HDMI Hot Plug
DivX ® Video On Demand
Game Mode On
On
On
On
Off
 - The displayed image may differ depending on the model.  
						

							132
Anynet+ (HDMI- CEC)
Anynet+ (HDMI- CEC)
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung 
product remote.  The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your 
Samsung device has this feature, check if there is an Anynet+ logo on it.
 ―
You can only control Anynet+ devices using the product remote control, not the buttons on the product.
 ―The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
 ―Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
 ―While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the 
AV device is connected as a secondary display.
 ― Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product.
 ―Press the TOOLS button to display the Anynet+ menu and select a menu you want.
Anynet+ Menu Description
View PC Changes Anynet+ mode to PC mode.
Select Device Shows the Anynet+ device list.
(device_name) MENU Shows the menu of the connected device menus. E.g. if a DVD player is connected, 
the disc menu of the DVD player will appear.
(device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is connected, the 
tools menu of the DVD player will appear.
 ―
Depending on the device, this menu may not be available.
(device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVD player is 
connected, the title menu of the movie in the DVD player will appear.
 ―
Depending on the device, this menu may not be available.
General
Smart Security
BD Wise
Anynet+ (HDMI-CEC)
HDMI Hot Plug
DivX ® Video On Demand
Game Mode
On
On
On
On
Off
 - The displayed image may differ depending on the model.  
						

							133
Auto  T urn O ff
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
 •
No / Ye s
 ―
If Auto Turn Off is set to Ye s , running external devices will turn off at the same time as the product powers off.
 ―
May not be enabled depending on the device.
Search for  Devices
Switching between A nynet+ Devices
1 Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E .
2 Select Select Device, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3 Select a device, and then press the E button. You can switch to the selected device.
 ―
The Select Device menu appears only when you set Anynet+ (HDMI-CEC) to On  in the System menu.
 ―
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in 
progress.
 ― If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use 
the Anynet+ function.
 ― Make sure to switch to an Anynet+ device by using the Select Device.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
Search for Devices Off
No
 - The displayed image may differ depending on the model.  
						

							134
Troubleshooting for Anynet+
ProblemPossible Solution
Anynet+ does not work. •
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
 •Check if the Anynet+ device power cord is properly connected.
 •
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
 •Check whether Anynet+ (HDMI-CEC) is set to On  in the System menu.
 •
Check whether the remote control is Anynet+ compatible.
 •Anynet+ doesn’t work in certain situations. (initial setup)
 •If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product 
off and on again.
 •Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
 • Check if the Anynet+ device is properly connected to the product and check if the  Anynet+ (HDMI-CEC) is set to On in the 
System  menu.
 •
Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
 • Select View PC in the Anynet+ menu.
 •Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The  message “Disconnecting 
Anynet+ device ...” appears on 
the screen.
 • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
 •Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
The Anynet+ device does not play.
 • You cannot use the play function when initial setup is in progress.  
						

							135
ProblemPossible Solution
The connected device is not 
displayed. •
Check whether or not the device supports Anynet+ functions.
 •Check whether or not the HDMI cable is properly connected.
 •Check whether Anynet+ (HDMI-CEC) is set to On  in the System menu.
 •
Search Anynet+ devices again.
 •
Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
 •Some HDMI cables may not support Anynet+ functions.
 •If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please 
repeat the device scan.  
						

							136
HDMI Hot  Plug
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
 •
Off / On
DivX
® 
V ideo  On D emand
Shows the registration code authorized for the product. 
If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file.
For more information about DivXⓇ  VOD,  visit “http://vod.divx.com”.
Game  Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by 
selecting game mode.
 •
Off / On
 ―
Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set  Game Mode to Off in the setup menu.
General
Smart Security
BD Wise
Anynet+ (HDMI-CEC)
HDMI Hot Plug
DivX
® Video On Demand
Game Mode
On
On
On
On
Off
 - The displayed image may differ depending on the model.  
						

							137
Reset  System
MENU m → System  → Reset System → ENTER E
System
Reset System
 -
The displayed image may differ depending on the model.
This option returns the current settings under system to the default factory settings.  
						

							138
Support
Software  Update
MENU m → Support → Software Update → ENTER E
The Software Update menu lets you upgrade your product software to the latest version.
 ―
Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
 ―When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can 
easily reset them after the upgrade.
U pdate  now
Update the software to the latest version.
A uto  update
This feature automatically updates the product when not in use. 
 •
Off / On
 -Current version: This is the software 
version already installed in the product.
Chapter  11  
						

							139
Contact  Samsung
MENU m → Support → Contact Samsung → ENTER E
View this information when your product does not work properly or when you want to upgrade the software.
You can find information regarding our call centres and how to download products and software.
 ―
Contact Samsung and find the product Model Code and Software Version.  
						

							140
Go to Home to play a variety of content from a memory device or a connected network.
Player
Search or play channels or content saved on devices.
Schedule
Create content schedules in local channels or edit saved channels.
Template
To create content, select a template.
C lone  Product
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
ID  Settings
Assign an ID to a set.
Press u/d to select a number, and press E .
Go to  H ome
Accessible using the HOME  button on the remote control.
MENU m → Support → Go to Home → ENTER E
PlayerPlay a variety of content, such as 
scheduled channels, templates or files.
Clone Product
Picture Mode ID Settings
On/Off TimerVideo Wall
TickerNetwork Status
More settingsSchedule Template
 -
The displayed image may differ depending on the model.
 - Refer to the "Home feature" chapter for details on sub-menu items.