Samsung Ud46d-p Manual

							MagicInfo Setup Wizard - v.1.12Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask:
Default gateway: 192 . 168 .  0  . 102
255 . 255 . 255 .  0
192 . 168 .   0   .   1
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
Alternate DNS server: 10 . 44 . 33 . 22
10 . 33 . 22 . 11
< Back(B) Next(N) > Finish Cancel
4 Enter the IP information.
MagicInfo Setup Wizard - v.1.12
Select Language -step 3
Select the language you want to install on the system for menus and 
dialogs.
Current Language    :    Engilsh
German
English
French
Italian Chinese [Traditional]
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B) Next(N) > Finish Cancel
5 Select a language. ( The default 
language is English.)
MagicInfo Setup Wizard - v.1.12 Select Screen Type - step 4
Landscape
Portrait
< Back(B) Next(N) > Finish Cancel6 Select a display mode.
MagicInfo Setup Wizard - v.1.12 Setup Information
1. Application :     MagicInfo Pro [LAN,WAN based version\
2. Internet Protocol [TCP/IP]
       IP :       192.168.0.102
3. Language :     English
4. Screen Type :     Landscape
Do not show again
< Back(B) Apply Finish Cancel
7 Double-check the settings you have 
just configured.
 ― If the execution icon does not appear, 
double-click the MagicInfo icon on 
the desktop. The icon will appear at the 
bottom right of the screen.  
						

							Changing the Input source
Source
SOURCE → Source 
Source
HDMI1HDMI2 AV DisplayPort
Component
PC
To go to Options, press and hold the Enter button.
 -
The displayed image may differ depending on the model.
Source  allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen 
of the selected source.
 ― The input source can also be changed by using the SOURCE button on the remote control.
 ―The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
 ―To view detailed information about connected source devices, press the  TOOLS button from the Source page. 
Edit Name
SOURCE → Source → TOOLS → Edit Name → ENTER E
Sometimes the screen will not display properly unless the name of a source device is specified in  Edit Name.
In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.
 ― The list can include the following source devices. Source  devices on the list differ depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD  / VCR / AV Receiver / Camcorder / DVI PC /  
DVI Devices / TV  / IPTV / HD DVD / DMA
 ―
Available settings in the Picture menu depend on the current source and settings made in Edit Name.
 • When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV devices.
 •
When connecting a PC to the HDMI IN port with HDMI cable, you should set the product to PC mode under Edit Name.
 •When connecting a PC to the HDMI IN port with HDMI to DVI cable, you should set the product to DVI PC mode under 
Edit Name.
 •When connecting an AV devices to the  HDMI IN port with HDMI to DVI cable, you should set the product to  DVI Devices 
mode under Edit Name.
Information
SOURCE → Source → TOOLS → Information → ENTER E
You can see detailed information about the selected external device.        
						

							Using MDC
MDC Programme Installation/Uninstallation
Installation
 ―MDC installation can be affected by the graphics card, mother board and network conditions.
1 Click the MDC Unified installation programme.
2 Select a language for installation. Next, click "OK".
3 When the " Welcome to the InstallShield Wizard for MDC_Unified " screen appears, click "Next".
4 In the "License Agreement" window displayed, select  
"I accept the terms in the license agreement" and click "Next ".
5 In the displayed "Customer Information" window, fill out all the information fields and click 
"Next".
6 In the displayed "Destination Folder" window, select the directory path you want to install the 
programme in and click "Next ".
 ―
If the directory path is not specified, the programme will be installed in the default directory 
path.
7 In the displayed "Ready to Install the Program" window, check the directory path to install the 
programme in and click "Install".
8 Installation progress will be displayed.
9 Click "Finish" in the displayed "InstallShield Wizard Complete" window.
 ― Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.
10 The MDC Unified shortcut icon will be created on the desktop after installation.
 ―The MDC execution icon may not be displayed depending on the PC system or product 
specifications.
 ― Press F5 if the execution icon is not displayed.
Uninstallation
1 Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2 Select MDC Unified from the list and click Change/Remove.
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme can be downloaded from the website.  
						

							Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
RS232C IN/OUT
Monitor 1
Monitor 2
Computer  
						

							Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
 ―Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
RJ45 MDC
HUB
Monitor 1
Monitor 2 Computer  
						

							Connection using a cross LAN cable
 ―Multiple products can be connected using the RS232C IN / OUT port on the product.
Monitor 1
Monitor 2
Computer
RS232C OUT
RJ45 MDC  
						

							Home feature
 ―To use the Player feature, set Play via to MagicInfo in System .
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
 • Network Channel: Play content using the server.
 ―
To run Network Channel, make sure the product is connected to the server.
 • Local Channel: Play content in internal memory or from external memory.
Player
HOME  → Player → ENTER E
PlayerPlay various contents sych as scheduled 
channels, templates or files.
Clone Product
Picture Mode ID Settings
On/Off TimerVideo Wall
TickerNetwork Status
More settingsSchedule Template
 -
The displayed image may differ depending on the model.
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.                                       
						

							Approving a connected device from the server
 •Set MagicInfo Mode to MagicInfo in Server Network Settings.
Approve and use the MagicInfo server now.
 ―
First configure the server Network Settings before device approval.
1 Access the server you have assigned to your device.
2 Enter your ID and password to log in.
3 Select Device from the top menu bar.
4 Select MagicInfo from the menus on the left.
5 Select Unapproved from the sub-menus of MagicInfo.
6 Select the Approve button for your device from the list of unapproved MagicInfo devices.  
						

							7 Enter the information required to approve the device.
 •Device Name: Enter the device name.
 •
Device Group: Select  to specify the group.
 •Location: Enter the current location of the device.
 ―
Pressing the INFO button on the remote when a network schedule is running will display the details of 
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8 Select the All  menu to check that the device has been registered.
9 When the device is approved by the server, the schedule registered in the selected group will be 
downloaded to the device. The schedule will run after it is downloaded.
 ―
For further details on how to configure a schedule, refer to the .
 ―If a device is deleted from the list of devices approved by the server, the device will reboot to reset its 
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1 Go to the tabs Device → Time.
2 Select your device.
3 Select Clock Set, and sync the time with the server.
 • When connecting to the server for the first time, the time on the product is set using the GMT time 
of the region where the server is installed.
 •The time on the product can be changed from the server as shown in step 3.
 •
Turning the product off and then on again will restore the time setting on the product to the last 
time that was set from the server.
 ―
For further details on how to manage the time (scheduling, holiday management, etc.), refer to the 
.  
						

							Network Channel
Play content, templates and schedules configured on the server.
 •You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.
1 Select Network Channel from the Player menu.
2 Network Channel will run.
Local Channel
Play a schedule or channel that was configured in the product.
1 Select Local Channel from the Player menu.
 ―
The No channels message appears if no channel has been registered in  Local Channel.
2 Local Channel will run.
Deployed Folders
Play a template stored on a connected USB device.
 ―
The Deployed Folders feature appears only when a USB device containing templates is connected.
My Templates
Play a template in My Templates stored in the internal memory of the product.
PlayerDevice:Internal Contents: All Sort by: File Name....Options
item(s)
Browse and play content stored on the selected device.
No channels Network Channel
Local Channel
 - The displayed image may differ depending on the model.