Samsung Ud46d-p Manual

							!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
 •Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an 
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
 •Your hand or finger may get stuck and injured.
 •Tilting the product at an excessive angle may cause the product to fall 
and an injury may result.
Do not place heavy objects on the product.
 •Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
 •Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when 
removed from the remote control. Place the battery in a location that 
children or infants cannot reach.
 •
If children have had the battery in their mouths, consult your doctor 
immediately.
When replacing the battery, insert it with the right polarity (+, -).
 •Otherwise, the battery may become damaged or it may cause fire, 
personal injury or damage due to leakage of the internal liquid.
!
Use only the specified standardized batteries, and do not use a new battery 
and a used battery at the same time.
 •
Otherwise, the batteries may be damaged or cause fire, personal injury 
or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must 
be returned for recycling purposes. The customer is responsible for returning 
the used or rechargeable batteries for recycling.
 •The customer can return used or rechargeable batteries to a nearby 
public recycling centre or to a store selling the same type of the 
battery or rechargeable battery.  
						

							 -Contact the vendor where you 
purchased the product if any 
components are missing.
 - The appearance of the components and 
items sold separately may differ from the 
image shown.
 -A stand is not provided with the product. 
To install a stand, you can purchase one 
separately.
Checking the Components
Components
 ―
Components may differ in different locations.




Quick Setup Guide Warranty card
(Not available in some 
locations)Regulatory guide
Batteries
(Not available in some locations)
Remote ControlPower cord
DP cableHolder (1EA) / Half holder (1EA) 
(for video wall) / Screws (8EA)
Holder-Ring (4EA) / Screw (4EA)
Preparations    
						

							Items sold separately
 -The following items can be purchased 
at your nearest retailer.
Wall-mount KitStand RS232C-Stereo cableDVI cableHDMI-DVI cable
D-SUB cableHDMI cable Video cableStereo cableComponent cable
RCA stereo cableRCA cable AV/Component adapterAUDIO adapterLAN cable
Network Box
DP-DVI cable
(Used to connect a network 
box) Samsung Wireles LAN Adapter
Magic Presenter     
						

							Parts
External sensor KIT
POWERON
 ―The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a 
wall, you can move the External sensor KIT to the side of the display.
 ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to 
improve quality.
Buttons Description
Remote Control 
Sensor
Aim the remote control towards this spot on the LCD Display.
 ―
Keep the area between the remote sensor and remote control obstacle-free.
Light sensorAutomatically detects the intensity of ambient light around a selected display and 
adjusts the screen brightness.
Power indicatorTurns off in power-on mode and blinks green in power-saving mode.
POWER buttonUse this button for turning the LCD Display on and off.
SOURCE buttonSwitches from PC mode to Video mode.
Selects the input source that an external device is connected to.
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30
 from the left and right.
 ― Store used batteries out of reach of children and recycle.
 ―Do not use a new and used battery together. Replace both batteries at the same time.
 ―Remove batteries when the remote control is not to be used for an extended period of time.                        
						

							Reverse Side
 ―The colour and shape of parts may differ from what is shown. Specifications are 
subject to change without notice to improve quality.
IR
 OUT
CONTROL IN
DP IN
HDMI IN 1
HDMI IN 2
DVI IN
(MAGICINFO)
AV / 
COMPONENT IN
AUDIO
OUT
IN
RJ 45
RS232C OUT
RS232C OUTRS232C OUTRS232C OUTRS232C OUT
SD CARD
RS232C IN
RGB IN
USB
DP OUT
(LOOPOUT)
Port Description
IR OUTReceives the remote control signal via the external sensor board and outputs the 
signal via LOOP OUT.
CONTROL INSupplies power to the external sensor board or receives the light sensor signal.
DP INConnects to a PC using a DP cable.
HDMI IN 1, HDMI IN 2Connects to a source device using an HDMI cable.
DP OUT (LOOPOUT)Connects to another product using a DP cable.
DVI IN (MAGICINFO)DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO: To use MagicInfo, make sure to connect the DP-DVI cable.
RGB INConnects to a source device using a D-SUB cable.
AV / COMPONENT INConnects to a source device using the AV/Component adapter.
AUDIO OUTConnects to the audio of a source device.
AUDIO INReceives sound from a PC via an audio cable.
RJ45Connects to MDC using a LAN cable.
USB Connect to a USB memory device.
RS232C OUTConnects to MDC using an RS232C cable.
RS232C IN
SD CARD
Connect to an SD memory card.                            
						

							Anti-theft Lock
 ―An anti-theft lock allows you to use the product securely even in public places.
 ―The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
 ―The following images are for reference only. Real-life situations may differ from what is shown in the images.
To lock an anti-theft locking device:
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
 - An anti-theft locking device can be purchased separately.
 -Refer to the user guide provided with your anti-theft locking device for details.
 -Anti-theft locking devices can be purchased at electronics retailers or online.  
						

							 -Remote control button functions may 
differ for different products.
 -
Remove batteries when the remote 
control is not to be used for an extended 
period of time.
 -Using other display devices in the same 
space as the remote control of this 
product can cause the other display 
devices to be inadvertently controlled.
 -Buttons without descriptions in the image 
are not supported.
Remote Control
 ―
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
 ―A button without a description in the image below is not supported on the product.
HOMEMENU
POWER
OFF
VOL
 MagicInfoPlayer I
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
SOURCE
Power off the product.
Number buttons
Enter the password in the OSD menu.
Mute the sound.
Unmuting the sound: Press MUTE again or press 
the volume control(+ VOL -) button.
Go to Home Launch Button. Use this hotkey to directly access MagicInfo.
The hotkey works if the network box is 
connected.
Power on the product.
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or  return to the previous menu.   
CH
DEL-/--CH LIST  
						

							TOOLSINFO
SETUNSETLOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
Display information about the current input 
source.
Move to the upper, lower, left or right menu, or 
adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source from  
PC, DVI, HDMI, or DisplayPort.
It sets safe lock function.
Used in Anynet+ mode and multimedia mode.
Quickly select frequently used functions.
Return to the previous menu.
If multiple products are connected through the  Video Wall feature, press the SET button and 
enter a product ID using the number buttons.
Control the product using the remote control.
Cancel a value that has been set using the SET 
button and control all connected products using  the remote control.
 -Remote control button functions may 
differ for different products.
To place batteries in the remote control       
						

							Connection Using an IR Stereo Cable  
(sold separately)
Make sure to connect the External ambient sensor while the product is powered 
off.  Then, power on the product.
Controlling more than one display product using 
your remote control
 •Connect the IR OUT port on the product to the CONTROL IN port on the 
other display product using the dedicated stereo cable.
 •A command sent from the remote control pointed at product 1 will be 
received by both display products 
1 and 2.
 ― The appearance may differ depending on the product.
1 2
IR OUT CONTROL IN
Controlling more than one display product using an 
External ambient sensor (sold separately)
 •
A command sent from the remote control pointed at product 1 (to which 
the External ambient sensor is connected) will be received by both display 
products 
1 and 2.
 ― The appearance may differ depending on the product.
1 2
IR OUT CONTROL IN
CONTROL IN
POWER
SOURCE            
						

							Before Installing the Product 
(Installation Guide)To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
 •Ensure that an authorized installation company installs the wall mount.
 •Otherwise, it may fall and cause personal injury.
 •Make sure to install the specified wall mount.
Switching between portrait and landscape
 ―
Contact Samsung Customer Service Centre for further details.
 • To use the product in portrait orientation, rotate it clockwise.
A
B
Figure 1.1 Side view
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35
C
 • When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface 
for ventilation and ensure that the ambient A temperature is kept below 35
C.