Samsung Ud46d-p Manual

							Appendix
Responsibility for the Pay Service  
(Cost to Customers)
 ―When the service is requested, in spite of in warranty, we may charge you for a visit from a service 
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
 • If a service technician gives instructions on how to use product or simply adjusts options without 
disassembling product.
 •If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
 •If a product is reinstalled or devices are connected additionally after installing the purchased 
product for the first time.
 •If a product is reinstalled to move to a different spot or to move to a different house.
 •If customer requests instructions on how to use because of another company's product.
 •If customer requests instructions on how to use the network or another company's programme.
 •
If customer requests software installation and setup for the product.
 •If a service technician removes/cleans dusts or foreign materials inside of the product.
 •If customer requests an installation additionally after purchasing a product through home-
shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
 •External impact or drop.
 •Use of supplies or separatly sold product unspecified by Samsung.
 •Repair from a person besides an engineer of outsourcing service company or partner of Samsung 
Electronics Co., Ltd.
 •Remodeling or repairing the product by customer.
 •Using it with incorrect voltage or non-authorised electrical connections.
 •Not following the "cautions" in User Manual.
Others
 •If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
 •
If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp, 
Filter, Ribbon, etc.)
 ―
If customer requests a service in case the product has no defect, service fee may be charged. So 
please read User Manual first.  
						

							WEEE
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, 
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the 
environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle 
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of 
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its 
electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other 
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains 
mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them 
through your local, free battery return system.  
						

							Optimum Picture Quality and Afterimage 
Burn-in Prevention
Optimum Picture Quality
 •Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) 
may be brighter or darker on the panel. This does not affect product performance.
 -The number of sub-pixels by panel type: 6,220,800
 • Run Auto Adjustment to improve the picture quality. If noise is still found even after auto 
adjustment, adjust Coarse or Fine.
 •
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage 
burn-in or defective pixels.
 -Activate power-saving mode or a dynamic screen saver if you will not be using the product for 
an extended period of time.
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers 
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period 
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that 
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner. 
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this, 
the accumulated voltage difference should be reduced.
 ―
Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
Black Matrix
Source Drain
Data Bus-Line TFT
Gate
Pixel Electrode (ITO)Storage 
Capaccitor (Cs)
Colour-Filter
Common 
Electrode (ITO)  
						

							Preventing afterimage burn-in
 ―The best way to protect the product from afterimage burn-in is switching the power off or setting the 
PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending 
on instruction guide.
 • Powering Off, Screen Saver and Power Saving Mode
 -Power off the product for 2 hours after using it for 12 hours.
 -
Go to Display Properties > Power Supply on your PC and set the product to power off as 
required.
 -Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
 • Regular colour Change
 -Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
FLIGHT FLIGHT
TIMETIME
OZ348
UA102 21:10 20:30
OZ348
UA102 21:10
20:30
Type 1 Type 2
 •
Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of 
light emitted.)
 ―
Avoid using grey as it may contribute to afterimage burn-in.
 ―Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT
TIME
OZ348 20:30
:
:
 •
Regular Text colour Change
 -Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
FLIGHT TIME
OZ348 20:30:
:FLIGHT TIME
OZ348 20:30:
:
FLIGHT TIME
OZ348 20:30:
:FLIGHT TIME
OZ348 20:30:
:
 -
Move and change text every 30 minutes as shown below.
FLIGHT TIME
OZ348 20:30:
:
[ Step 3 ] 
[ Step 2 ]
FLIGHT TIME
OZ348:
:
[ Step 1 ]
20:30
 - Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.  
						

							Licence
Manufactured under licence from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
 Õ
Manufactured under a licence from U.S. Patent No’s: 5,956,674, 5,974,380, 
5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,\
723, 
7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and 
the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a 
trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the 
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in 
the United States and other countries.
DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium 
content.
DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of Rovi 
Corporation or its subsidiaries and are used under licence.
ABOUT DIVX VIDEO: DivXⓇ is a digital video format created by DivX, LLC, a subsidiary of Rovi 
Corporation. This is an official DivX CertifiedⓇ device that has passed rigorous testing to verify that 
it plays DivX video. Visit divx.com for more information and software tools to convert your files into 
DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedⓇ device must be registered in order to play 
purchased DivX Video-on-Demand ( VOD) movies. To obtain your registration code, locate the 
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to 
complete your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu. 
Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Centre or send 
email to [email protected].  
						

							Terminology
480i / 480p / 720p / 1080i / 
1080p____ Each of the scanning 
rates above refers to the number of 
effective scanning lines that decides 
the screen resolution. The scanning 
rate may be indicated in i (interlaced) 
or p (progressive), depending on the 
scanning method.
- Scanning
Scanning refers to a process of sending 
pixels that form an image progressively. 
A larger number of pixels will deliver a 
clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines 
of pixels are scanned one by one 
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every other 
line of pixels is scanned from top to 
bottom first and then the remaining 
lines of pixels (that were not scanned) 
are scanned.Non-interlace Mode and Interlace 
Mode____ Non-interlace mode 
(progressive scan) displays a horizontal 
line from the top to the bottom of a 
screen progressively. Interlace mode 
displays the odd number lines first 
and the even number lines next. Non-
interlace mode is mainly used in 
monitors as it produces screen clarity 
and interlace mode is mainly used in 
T Vs.
Dot Pitch____ The screen consist of 
red, green and blue dots. A shorter 
distance between the dots produces a 
higher resolution. Dot pitch refers to the 
distance between the shortest distance 
between dots of the same colour. Dot 
pitch is measured in millimeters.
Vertical Frequency____ The product 
displays a single image many times 
per second (like a fluorescent light that 
flickers) to display an image for a viewer 
to see. The rate of a single image being 
displayed repeatedly per second is 
called vertical frequency or refresh rate. 
Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being 
displayed 60 times in one second.
Horizontal Frequency____ The time 
required to scan a single line from the 
left to the right side of the screen is 
called a horizontal cycle. The reciprocal 
number of a horizontal cycle is called 
horizontal frequency. Horizontal 
frequency is measured in kHz.
Source
____ Input source refers to a 
video source device connected to the 
product such as a camcorder or video 
or DVD player. Component ports (green, blue and 
red)____ The component ports, which 
identify, transmit and receive contrast 
signals, provide superior picture quality 
to any other video connection methods.
Plug & Play____ Plug & Play is a 
function that allows the automatic 
exchange of information between a 
monitor and PC to produce an optimum 
display environment. The product uses 
VESA DDC (international standard) to 
execute Plug & Play.
Resolution____ Resolution is the 
number of horizontal dots (pixels) and 
vertical dots (pixels) that form a screen. 
It represents the level of display detail. 
A higher resolution enables more 
data to be displayed on the screen 
and is useful to perform multiple tasks 
simultaneously.
E.g. A resolution of 1920 X 1080 consists 
of 1,920 horizontal pixels (horizontal 
resolution) and 1,080 vertical pixels 
(vertical resolution).DVD (Digital Versatile Disc)____ DVD 
refers to a CD-sized mass storage disk 
where you can save multimedia (audio, 
video or game) applications using 
MPEG-2 video compression technology.
HDMI (High Definition Multimedia 
Interface)____ It is an interface that 
can be connected to a digital audio 
source as well as a high-definition video 
source by using a single cable without 
compression.
Multiple Display Control (MDC)____ 
MDC (Multiple Display Control) is an 
application that allows multiple display 
devices to be controlled simultaneously 
using a PC. Communication between 
a PC and monitor takes place using 
RS232C (serial data transmission) and 
RJ45 (LAN) cables.