Samsung Ud46d-p Manual

							A
B
C
E
Figure 1.3 Side view
D D
Figure 1.2 Side view
Installation on an Indented Wall
 ―
Contact Samsung Customer Service Centre for further details.
Plane view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35
C
 ―When installing the product on an indented wall, allow at least the space specified above between the product and wall for 
ventilation and ensure that the ambient temperature is kept below 35
C.
Dimensions
1
2
3
4
5
Unit: mm (inches)
Model name12234345
UD46D-P 1022.1 (40.2)1018.3 (40.1)572.9 (22.6)576.7 (22.7)97.0 (3.8)
 ―
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.     
						

							Installing the Wall MountPreparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the 
wall mount on your own.  
						

							Wall Mount Kit Specifications (VESA)
 ―Install your wall mount on a solid wall perpendicular to the floor. Before 
attaching the wall mount to surfaces other than plaster board, please contact 
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe 
personal injury.
 • Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
 •Do not use screws that are longer than the standard length or do not comply with the VESA standard screw 
specifications. Screws that are too long may cause damage to the inside of the product.
 •For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ 
depending on the wall mount specifications.
 •
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. 
Samsung is not liable for these kinds of accidents.
 •Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the 
consumer fails to follow the product installation instructions.
 •Always have two people mount the product on a wall.
 •Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name VESA screw hole 
specs (A * B) in 
millimetersStandard Screw
Quantity
UD46D-P 600 × 400 (23.6 × 15.7)M84
 ―
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.  
						

							Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
 ―Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
 ― Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
 ― Connect the sound ports correctly: left = white and right = red.
 ―Check the types of ports at the back of the product you want to connect.
Connecting to a PC
 • Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
 •A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
 ―
Connecting parts may differ in different products.
Connection using the D-SUB cable (Analogue type)
RGB IN
AUDIO IN    
						

							Connection using a DVI cable (Digital type)
DVI IN (MAGICINFO)
 AUDIO IN
Connection Using an HDMI-DVI Cable
 ―When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access 
video and audio content stored on the PC.
HDMI IN 1, HDMI IN 2
AUDIO IN      
						

							Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
Connection Using an DP Cable
DP IN
 •Precautions for using DP
 ―
To increase the standby power capacity, the product stops DP communication when it is turned 
off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-saving mode, monitor 
setting changes may not be updated. As a result, screen output may not be displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.
 ― Some graphics cards that are not compliant with the DP standard may prevent the Windows 
Booting/Bios screen from being displayed when the product is in power-saving mode. If this is 
the case, make sure to turn on the product first before turning on your PC.
 ― The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based 
on the VESA standards. Using a DP cable that is not VESA compliant may cause the product to 
function improperly. Samsung Electronics shall not be held responsible for any issues from using 
a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.    
						

							Connecting to a Video Device
 •Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
 •You can connect a video device to the product using a cable.
 ―
Connecting parts may differ in different products.
 ―Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV / COMPONENT IN
AUDIO IN
Connection Using the component Cable
AV / COMPONENT IN
AUDIO IN      
						

							Connection Using an HDMI-DVI Cable
 ―Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To 
resolve this, additionally connect an audio cable to the audio ports on the product and video device. 
When you connect a video device to the product using an HDMI-DVI cable, set  Edit Name to DVI 
Devices to access video and audio content stored on the video device.
 ― Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
HDMI IN 1, HDMI IN 2
AUDIO IN
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
 • For better picture and audio quality, connect to a digital device using an HDMI cable.
 •
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
 -To connect the product to a digital device that does not support HDMI output, use an HDMI-
DVI and audio cables.
 •
The picture may not display normally (if at all) or the audio may not work if an external device that 
uses an older version of HDMI mode is connected to the product. If such a problem occurs, ask the 
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
 •Be sure to use an HDMI cable with a thickness of 14 mm or less.
 •Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection 
error may occur.
 •
A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
HDMI IN 1, HDMI IN 2     
						

							Connecting to an Audio System
 ―Connecting parts may differ in different products.
AUDIO OUT
Connecting the LAN Cable
 ―Connecting parts may differ in different products.
RJ45
 • Use Cat7(*STP Type) cable for the connection. 
*Shielded Twist Pair    
						

							Connecting the network box (Sold separately)
 ―For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
 ―To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
 ―For details on how to use MagicInfo, refer to the DVD provided with the network box.
 ―The information in this section is subject to change without notice for quality improvement.
 ―If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the operating system, or 
installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support and will be charged a fee for a visit 
from a service technician. A product exchange or refund will also not be available.
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
MagicInfo-i Premium (Web-based version)
Select Later
< Back(B) Next(N) > Finish CancelEntering MagicInfo mode
1 After installing and connecting the network box (sold separately) to the product, power on the product.
2 Press SOURCE on the remote control, and select MagicInfo.
 ― Connecting the network box to the DVI IN (MAGICINFO) port on the product will change Source  from DVI to MagicInfo.
3 Select the default application you want to run when MagicInfo starts.