Samsung Ud46d-p Manual

							Sound Effect
MENUm → Sound → Sound Effect → ENTERE
Sound Effect
Virtual Surround
Dialog Clarity
EqualiserOff
Off
 -
The displayed image may differ depending on the model.
Configure your preferred sound effect for output sound.
 ―
If Speaker Settings is set to External, Sound Effect is disabled.
 ―Available only when Sound Mode is set to Standard.
Virtual Surround
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related 
Transfer Function) technology.
 • Off / On
Dialog Clarity
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be 
heard more clearly.
 •Off / On
Equaliser
Use Equaliser to customize sound setting for each speaker.
 •
Balance L/R: Adjusts the balance between the right and left speaker.
 •100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
 •Reset: Resets the equalizer to its default settings.  
						

							HDMI Sound
MENU m → Sound → HDMI Sound → ENTER E
Sound
HDMI SoundAV(HDMI)
 -
The displayed image may differ depending on the model.
Select whether to hear from AV(HDMI) or PC(DVI).
 • AV(HDMI) / PC(DVI)
Sound on Video Call
MENU m → Sound → Sound on Video Call → ENTER E
Sound
Sound on Video Call Current Source
 -The displayed image may differ depending on the model.
Select sound output to listen to during a video call.
 • Current Source / Video Call  
						

							Speaker Settings
MENU m → Sound → Speaker Settings → ENTER E
Sound
Speaker Settings
 -The displayed image may differ depending on the model.
TV Sound Output
 •
External / Receiver
 ―
If there is no video signal, both the products speakers and the external speakers will be mute.
Auto Volume
MENU m → Sound → Auto Volume → ENTER E
Sound
Auto Volume Off
 -
The displayed image may differ depending on the model.
The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
 • Off / Normal / Night
Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter.  Night is useful at night, when you 
may want to keep the volume low.
 ― To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the 
connected source device may not be applied if Auto Volume is set to Normal or Night.  
						

							Reset Sound
MENU m → Sound → Reset Sound → ENTER E
Sound
Reset Sound
 -The displayed image may differ depending on the model.
The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.   
						

							Network
Network Status
MENUm → Network → Network Status → ENTERE
You can check the current network and Internet status.
Network Status
Your wireless network and Internet connection are setup and ready to use.You are connected to the Internet. If you have any problems using online services, please 
contact your Internet service provider.
Close
Retry
IP Settings
Disconnect
 -
The displayed image may differ depending on the model.
Network Settings
MENUm → Network → Network Settings → ENTERE
Configure network settings to use various smart hub features such as Internet search, content sharing 
through a home network and feature updates.
Network SettingsSelect your network type.
Network Type Wireless
Wireless network
Refresh WPS(PBC) You can connect your 
Device to the internet. 
Please select which wireless 
network to use.
 -
The displayed image may differ depending on the model.
Network Type
 • Wireless / Wired  
						

							Network Settings (Wired)
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
 •You can attach your product to your LAN by connecting the LAN port on the back of your product 
to an external modem using a LAN cable.
See the diagram below.
RJ45The Modem Port on the Wall External Modem
(ADSL / VDSL)
Modem Cable LAN CableLAN
 •
You can attach your product to your LAN by connecting the LAN port on the back of your product 
to an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See 
the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL) IP Sharer
(having DHCP server) LAN
Modem Cable LAN Cable LAN Cable
RJ45
 •
Depending on how your network is configured, you may be able to attach your product to your 
LAN by connecting the LAN port on the back of your product directly to a network wall outlet 
using a LAN cable. 
See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in 
your house.
The LAN Port on the Wall LAN
LAN CableRJ45
If you have a Dynamic Network, you should use an ADSL modem or router that supports the Dynamic 
Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the 
IP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you do 
not have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter 
the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen 
when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, 
contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
 ― You can use ADSL modems that support DHCP if your network requires a Static IP address.
 ―ADSL modems that support DHCP also let you use Static IP addresses.        
						

							Set the network connection to use Internet services such as perform software upgrades.
Automatic Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1 Set Network Type to Wired from the Network Settings page.
2 Press the Connect button to start Network Settings.
 -The Connect button is only enabled when the LAN cable is properly connected.
3 The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection 
completed.” message appears.
 ―
If the connection process fails, check the LAN port connection.
 ―If the automatic process cannot find the network connection values or if you want to set the 
connection manually, go to the next section, network setup.
Manual Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server 
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1 Right click the Network icon on the bottom right of the screen.
2 In the pop-up menu that appears, click Status.
3 On the dialog that appears, click the Support tab.
4 On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1 Set Network Type to Wired from the Network Settings page.
2 Press the Connect button to start Network Settings.
 - The Connect button is only enabled when the LAN cable is properly connected.
3 The network test screen appears and the verification process starts. Press  Stop. The verification 
process stops.
4 Select IP Settings on network connection screen. The IP Settings screen appears.
5 Select the field at the top, press E , and then set IP Settings to Enter manually. Repeat the entry 
process for each field in the IP Address.
 ― Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
6 When done, select OK at the bottom of the page, and then press E . The network test screen 
appears and the verification process starts. 
7 When the connection has been verified, the “Wired network and Internet connection 
completed.” message appears.  
						

							Network Setting (Wireless)
Connecting to a Wireless Network
This product does not support wireless networking. To use wireless networks, purchase a Samsung 
wireless LAN adapter ( WIS10ABGN, WIS12ABGNX). Connect the adapter to the product. Use the wireless 
Internet router to connect to the Internet.
The LAN Port on the WallWireless IP sharer
(router having DHCP server)
LAN CableProduct Panel
Samsung Wireles LAN Adapter
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce 
sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n 
communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a 
network connection, the video may not play smoothly.
 ― You must use the “Samsung Wireless LAN adapter” ( WIS10ABGN, WIS12ABGNX) to use a wireless 
network. The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are 
offered by select retailers, Ecommerce sites, and Samsungparts.com.
 ― Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the 
wireless IP sharer is currently being used by another device nearby, this will result in interference and 
communication failure.
 ― Your product supports only the following wireless network security protocols. If you select the Pure 
High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP, TKIP or TKIP AES 
( WPS2Mixed) on your AP or wireless router, Samsung products will not support a connection in 
compliance with new Wi-Fi certification specifications.
 ― If your wireless router supports WPS ( Wi-Fi Protected Setup), you can connect to the network via PBC 
(Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure 
the SSID and WPA key in either mode.
 ― If your router, modem, or device is not certified, it may not connect to the product via the “Samsung 
Wireless LAN adapter”.
 ― Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”.
 ―Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup,  WPS(PBC)
 ―
The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product 
with a USB hub or USB extension cable other than the cable supplied with the product.     
						

							Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network 
to transmit an encrypted security code called an Access or Connection Information. The Connection 
Information is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified 
length you were asked to enter when you set up security for your wireless network. If you use this 
method of setting up the network connection, and have a Connection Information for your wireless 
network, you will have to enter the Pass Phrase during the the automatic or manual setup process.
How to set up automatically
1 Set Network Type to Wireless from the Network Settings page.
2 The Network function searches for available wireless networks. When done, it displays a list of the 
available networks.
3 In the list of networks, press the ▲ or ▼ button to select a network, and then press the E  button 
twice.
 ― If the desired wireless router does not appear, select Refresh to search again.
 ―If the router cannot be found after retrying, select the Stop  button.
The Add Network button appears.
Select Add Network to add a wireless router to connect to.
4 If the Enter password. screen appears, go to step 5. If you select a wireless router that does not 
have security, go to step 7.
5 If the router has security, enter the Enter password. (Security key or PIN).
6 When done, use the right arrow button to move the cursor to Done, and then press E. The 
network connection screen appears and the verification process starts.
 ― A connection with the router is established, but the Internet cannot be accessed.
7 When the connection has been verified, the “Your wireless network and Internet connection 
are setup and ready to use.” message appears.
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server 
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1 Right click the Network icon on the bottom right of the screen.
2 In the pop-up menu that appears, click Status.
3 On the dialog that appears, click the Support tab.
4 On the Support Tab, click the Details button. The Network connection values are displayed.  
						

							How to set up manually
1 Set Network Type to Wireless from the Network Settings page.
2 The Network function searches for available wireless networks. When done, it displays a list of the 
available networks.
3 In the list of networks, press the u or d  button to select a network, and then press the  E button 
twice.
 ― If the desired wireless router does not appear, select Refresh to search again.
 ―If the router cannot be found after retrying, select the Stop  button.
The Add Network button appears.
Select Add Network to add a wireless router to connect to.
4 If the Enter password. screen appears, go to step 5. If you select a wireless router that does not 
have security, go to step 7.
5 If the router has security, enter the Enter password. (Security key or PIN).
6 When done, use the right arrow button to move the cursor to Done, and then press E. The 
network connection screen appears and the verification process starts.
7 Select Stop  while network connections are being attempted. This will stop the connection.
8 Select IP Settings on network connection screen. The IP Settings screen appears.
9 Select the field at the top, press E , and then set IP Settings to Enter manually. Repeat the entry 
process for each field in the IP Address.
 ― Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
10 When done, select OK at the bottom of the page, and then press E . The network test screen 
appears and the verification process starts. 
11 When the connection has been verified, the “Your wireless network and Internet connection 
are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1 Set Network Type to Wireless from the Network Settings page.
2 Select WPS(PBC), press E , and then press E again.
3 Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires 
all the network setting values it needs and connects to your network.
4 The network connection screen appears, and network setup is done.