Samsung Television HU9000 User Manual

							4445
Entering Text Using the On-Screen QWERTY Keypad
A QWERTY keypad appears when you need to enter text (entering the network password, logging into 
your Samsung account, etc.), allowing you to enter text using your remote control.
Using Additional Functions
Select  on the QWERTY keyboard screen. The following options are available:
 
●Recommended text
Enable/disable the Recommended Text feature Enabling the Recommended text feature allows 
you to quickly enter text starting with the characters you typed in by displaying recommended 
words. To enter the word "Internet," for example, all you have to do is enter "In" and select the 
word "Internet" from the list of recommended words. The word is memorized so that you can 
enter the same text again more easily.
 
●Reset recommended text data
Delete both the recommended words and the memorized words to clear the list.
 
●Predict Next Letter
Enable/disable the Text Prediction feature. Enabling the Text Prediction feature eliminates the 
need to find and select individual character keys. To enter the word "Internet," for example, select 
"I". A predicted word will then appear next to the I key. Simply select the predicted word to enter 
"Internet".
 
"
This feature is limited to words that have previously been added to the dictionary. 
						

							46
Establishing a Wired Internet Connection
Connecting the TV to the Internet gives you access to online services and SMART features, and lets 
you update the TV's software quickly and easily through the Internet.
Using Cat 7 LAN Cables
We recommend using Cat 7 LAN cables to link your TV to the Internet Access Points. 
"
The TV will not be able to connect to the Internet if the network speed is below 10Mbps.
There are three ways to connect the TV to your Internet Access Points. Using Cat 7 cables, connect 
the TV to the Access Points as shown in one of the following illustrations.
 
●External Modem
 
●① IP Router + ② External Modem 
						

							4647
 
●Wall-mounted LAN Outlet
Connecting to a Wired Internet Network Automatically
MENU  > Network >  Network Settings  Try Now
Automatically connect to an available network.
11 Set the Network type  to Wired, and then select  Connect.
21 The TV attempts to connect to an available network. Once it is successful, you will see a 
confirmation message. Select  OK. If the attempt fails, try again, or connect manually. 
						

							48
Connecting to a Wired Internet Network Manually
MENU > Network >  Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask, 
gateway, and DNS values manually to connect to the network. To get these values, contact your 
Internet Service Provider (ISP).  
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP 
addresses.
11 Set the Network type  to Wired, and then select  Connect.
Network Settings
Select your network type.
Network type Wired
Connect
You can connect your 
TV to the internet.
21 Select  Stop when the TV attempts to connect to the network. Once the network connection has 
been interrupted, select IP Settings .
Network Settings
Connection verification cancelled.
Wired network connection test is stopped.
Change Network IP SettingsRetryClose 
						

							4849
31 In the IP Settings screen, set IP Setting to Enter Manually .
IP Settings
IP Setting  Enter Manually
IP Address 0.0.0.0
Subnet Mask  0.0.0.0
Gateway 0.0.0.0
DNS Setting  Enter Manually
DNS Server 0.0.0.0
OK Cancel
41 Select IP Address . When the IP Address entry window appears, enter three digits into each field 
on the IP Address line. If the value has less than three digits, add leading zeroes. For example, 
to enter 10, enter 010. After three digits have been entered in a field, the highlight automatically 
jumps to the next field.
 
"
On a standard remote, enter numbers by pressing the number buttons. On the Samsung Smart Control, 
press the  KEYPAD button. The On-Screen Remote appears. Use the On-Screen Remote to enter 
numbers. After you have filled in all four fields, press the touch pad on the Samsung Smart Control or 
the E button on the standard remote again.
51 Repeat the process for Subnet Mask, Gateway, and DNS Server.
61 When done, select  OK.
71 The TV attempts to connect to the network again using the settings you entered. Once it has 
established the connection, it displays a confirmation message. Select  OK.
 
"
The network connection speed may differ depending on the DNS server settings.
 
"For details on the DNS server settings, contact your Internet service provider (ISP). 
						

							50
Establishing a Wireless Internet Connection
Connecting the TV to the Internet gives you access to online services and SMART features, and lets 
you update the TV's software quickly and easily through the Internet.
Connecting to a Wireless Internet Network Automatically
MENU > Network >  Network Settings
Connect the TV to the Internet via a wireless router. Make sure you have the wireless router's SSID 
(name) and password settings before attempting to connect. The password can be found on the 
wireless router's configuration screen.
11 On the Network Settings  screen, set Network type  to Wireless . The TV automatically displays a 
list of available wireless networks.
21 Select a network. If the network you want doesn't appear in the list, select  Add Network, and 
enter the network's SSID (name) manually.
31 Using the on-screen keyboard that appears, enter the password. When finished, select  Done. If 
the selected network is not security-enabled, the TV will by-pass the on-screen keyboard and 
attempt to connect right away.
 
–To select a character on the on-screen keyboard, highlight the character and then select it. 
Select Caps to view capital letters. Select the 123#& key to view additional characters.
 
–To view the password as you enter it, select  Show Password.
41 The TV attempts to connect to the network. Once a connection is established, the TV displays a 
confirmation message. Select OK. If the attempt fails, try again or connect manually 
						

							5051
Connecting to a Wireless Internet Network Manually
MENU > Network >  Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask, 
gateway, and DNS values manually to connect to the network. To get the IP address, subnet mask, 
gateway and DNS values, contact your Internet Service Provider (ISP).  
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP 
addresses.
11 On the Network Settings screen, set  Network type to Wireless . The TV automatically displays a 
list of available wireless networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
AP0000You can connect your TV to 
the internet. Please select 
which wireless network to 
use.
AP0001
Add Network
Refresh WPS (PBC)
21 Select a network. If the network you want doesn’t appear in the list, select  Add Network, and 
enter the network’s SSID (name) manually.
31 Using the on-screen keyboard that appears, enter the password. When finished, select  Done. If 
the selected network is not security-enabled, the TV will by-pass the on-screen keyboard and 
attempt to connect right away.
 
–To select a character on the on-screen keyboard, highlight the character and then select it. 
Select Caps to view capital letters. Select the 123#& key to view additional characters.
 
–To view the security password as you enter it, select  Show Password.
41 Select Stop when the TV attempts to connect to the network. Once the network connection has 
been interrupted, select IP Settings .
Network Settings
Connection verification cancelled.
Wireless network connection test is stopped.
Change Network IP SettingsRetryClose 
						

							52
51 In the IP Settings screen, set IP Setting to Enter Manually .
IP Settings
IP Setting  Enter Manually
IP Address 0.0.0.0
Subnet Mask  0.0.0.0
Gateway 0.0.0.0
DNS Setting  Enter Manually
DNS Server 0.0.0.0
OK Cancel
61 Select IP Address . When the IP Address entry window appears, enter three digits into each field 
on the IP Address line. If the value has less than three digits, add leading zeroes. For example, 
to enter 10, enter 010. After three digits have been entered in a field, the highlight automatically 
jumps to the next field.
 
"
On a standard remote, enter numbers by pressing the number buttons. On the Samsung Smart Control, 
press the  KEYPAD button. The On-Screen Remote appears. Use the On-Screen Remote to enter 
numbers. After you have filled in all four fields, press the touch pad on the Samsung Smart Control or 
the E button on the standard remote again.
71 Repeat the process for Subnet Mask, Gateway, and DNS Server.
81 When done, select  OK.
91 The TV attempts to connect to the network again using the entered settings. Once it has 
established the connection, it displays a confirmation message. Select  OK.
 
"
Network connection speeds may differ depending on the DNS server settings.
 
"For details on the correct DNS server settings, contact your Internet service provider (ISP).
Connecting to a Wireless Internet Network with WPS
MENU  > Network >  Network Settings
If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS 
automatically configures the SSID and WPA key settings.
 
●Your router must support WPS to use the WPS functionality.
11 On the Network Settings  screen, set Network type  to Wireless . The TV automatically displays a 
list of available wireless networks.
21 Select  WPS (PBC), and then press the router’s WPS or PBC button within two minutes.
31 The TV automatically acquires the SSID and password settings, and then connects to the 
network. Once a connection is established, the TV displays a connection message. Select  OK. 
						

							5253
Troubleshooting Internet Connectivity Issues
If you are not able to connect the TV to the Internet, read the information below.
Troubleshooting Wired Internet Connectivity Issues
No network cable found Try Now Try Now
Make sure the network cable is plugged in. If it is connected, make sure the router is turned on. If it is 
on, try turning if off and on again.
IP auto setting failed Try Now
Do the following or configure the IP Settings manually.
11 Ensure that the DHCP server is enabled on the router and reset the router.
21 If this does not work, contact your Internet Service Provider for more information.
Unable to connect to the network Try Now
Do the following:
11 Check all IP Settings .
21 Ensure that the DHCP server is enabled on the router. Then, unplug the router and plug it back in.
31 If this does not work, contact your Internet Service Provider for more information.
Connected to a local network, but not to the Internet Try Now
11 Make sure that the Internet LAN cable is connected to the router's external LAN port.
21 Check the DNS values in  IP Settings.
31 If the problem persists, contact your Internet Service Provider. 
						

							54
Network setup is complete, but unable to connect to the Internet Try Now
If the problem persists, contact your Internet Service Provider.
Troubleshooting Wireless Internet Connectivity Issues
Wireless network connection failed, Try Now Try Now
Selected wireless router not found. Go to Network Settings and select the correct router.
Unable to connect to a wireless router Try Now Try Now
Check the following:
11 Check if the router is turned on. If it is, turn it off and on again.
21 Enter the correct password if required.
IP auto setting failed Try Now
Do the following or configure the IP Settings manually.
11 Make sure that the DHCP server is enabled on the router. Then, unplug the router and plug it back 
in.
21 Enter the correct password if required.
31 If this does not work, contact your Internet Service Provider for more information.
Unable to connect to the network Try Now
Do the following:
11 Check all IP Settings .
21 Enter the correct password if required.
31 If this does not work, contact your Internet Service Provider for more information.