Samsung Television HU9000 User Manual

							194195
Registering the TV as a DivX-Certified Device (Watching For Pay 
DivX Movies)
MENU > System >  DivX® Video On Demand  Try Now
To watch DivX DRM protected movies on the TV, you must register the TV as a DivX certified device.
 
"
DRM stands for Digital Rights Management and is a technical security mechanism to protect the copyright 
of the content provider.
 
"You can watch movies that you have recorded or free DivX movies without registration.
 
"Visit the DivX website (http://www.divx.com) and log into your user account before registering the TV as a 
DivX-certified device. If you do not have an account, please create one.
11 Select  System >  DivX® Video On Demand . A window with a registration code appears on the 
screen.
21 Visit the DivX website on a computer, and then click [Register Your Device] under [Support] in the 
top menu.
31 Enter the registration code shown on the TV's screen in the [Enter your registration code] field.
41 Enter the TV's name in the [Name your device] field, and then click [NEXT].
51 Click [DOWNLOAD], and then save the [device_name.divx] file.
61 Transfer the [device_name.divx] file from the computer onto a USB device, and then plug the USB 
device into the TV.
71 Run the [device_name.divx] file on the TV to register the TV as a DivX-certified device. 
						

							196
Restoring the TV to the Factory Settings
MENU > Support >  Self Diagnosis >  Reset Try Now
This option restores all TV settings (excluding the Internet and network settings) to the factory 
defaults.
11 Select Support >  Self Diagnosis >  Reset. The Security PIN entry window appears on the screen.
21 Enter the Security PIN, and then select  Ye s. All settings are then reset. The TV turns off and on 
again automatically, and then displays the Setup  screen.
 
"
For more information on Setup, refer to the user manual that came with the TV.
Using the TV as a Display Model (exclusively for retail stores)
MENU  > Support >  Use Mode Try Now
Select Support >  Use Mode > Store Demo. This turns the TV into a display model for use in a retail 
environment.
 
"
For all other uses, select  Home Use.
 
"Store Demo should be used in retail environments only. With  Store Demo, certain functions are disabled and 
the TV automatically resets itself after a certain amount of time. 
						

							197
Getting Support
The TV has several built-in systems designed for user and TV system support.
Support through Remote Management
MENU > Support >  Remote Management Try Now
If you need assistance with your TV, you can use this feature to let Samsung Electronics diagnose your 
TV remotely. You will need to read and agree to the service agreement before using this feature. A 
Samsung Electronics technician will then diagnose, repair, and update your TV remotely. These features 
are only available when your TV is connected to the Internet.
Getting Remote Support
Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can 
remotely.
 
●Diagnose your TV
 
●Adjust the TV settings  for you
 
●Reset your TV to its factory settings.
 
●Install recommended firmware updates 
						

							198
How Does it Work?
Having a Samsung Tech service your TV remotely is easy.
Call the Samsung Contact Center and 
ask for remote support.
Open the menu  on your TV and go to 
the Support section .
Select Remote Management, and 
then read and agree to the service 
agreements. When the PIN screen 
appears, provide the PIN number to the 
agent.
The agent accesses your TV .
Finding the Information You Need for Service
MENU > Support >  Contact Samsung  Try Now
Use this option to display the address of the Samsung website, the call center phone number, your 
TV's model number, your TV's software version, the Smart Hub info, and other information you may 
need to get service support from a Samsung call agent or the Samsung website. 
						

							198199
There is a problem with the picture
Testing the Picture
MENU > Support >  Self Diagnosis >  Picture Test Try Now
Before you review the list of problems and solutions below, use Picture Test to determine if the 
problem is caused by the TV. The Picture Test displays a high definition picture you can examine for 
flaws or faults. If the test picture does not appear or there is noise or distortion, the TV may have a 
problem. Contact Samsung’s Call Center for assistance. If the test picture is displayed properly, there 
may be a problem with an external device. Please check the connections. If the problem persists, 
check the signal strength or refer to the external device’s user manual.
The Problem Try this!
Flickering and 
Dimming If your Samsung Television is flickering or dimming sporadically, you may need 
to disable some of the energy efficiency features. Disable Energy Saving
 (System 
>  Eco Solution  > Energy Saving ) or Eco Sensor ( System > Eco Solution  > Eco 
Sensor).
Component 
Connections/Screen 
Color If the color on your Samsung television screen is not correct or the black and white 
colors are off, run Picture Test (
Support > Self Diagnosis >  Picture Test).
If the test results indicate that the problem is not caused by the TV, do the 
following:  
● Confirm that the One Connect's video input connectors are connected to the 
correct external device video output connectors.
 
● Check the other connections as well. If the TV is connected to an external 
device via a component cable, confirm that the Pb, Pr, and Y jacks are plugged 
into their proper connectors.
In HDMI mode, there 
is something wrong 
with the screen. HDMI UHD Color
 is specific to a UHD source, and does not operate properly for 
any other source. In this case, navigate Picture >  Picture Options > HDMI UHD 
Color menu, and then set the HDMI UHD Color -enabled HDMI connector to Off.
Screen Brightness If the colors on your Samsung TV are correct but just a little too dark or bright, try 
adjusting the following settings first.
 
● Go to the Picture menu and adjust the Backlight/Cell Light
 (available on 
different models)  Contrast, Brightness, Sharpness, Color, and  Tint (G/R) 
settings.
Ghosting, Blurring, or 
Juddering If you notice ghosting or blurring on the screen, use the Auto Motion Plus
 option 
(Picture >  Picture Options  > Auto Motion Plus ) to resolve the issue.
Unwanted Powering 
Off If your Samsung TV appears to turn off by itself, try disabling some of the TV's 
energy efficiency features. See if 
Sleep Timer (System >  Time > Sleep Timer ) has 
been enabled. The Sleep Timer  automatically turns the TV off after a specified 
period of time. If the Sleep Timer has not been enabled, see if  No Signal Power Off 
(System >  Eco Solution  > No Signal Power Off) or Auto Power Off ( System > Eco 
Solution  > Auto Power Off) has been enabled and disable them. 
						

							200
The ProblemTry this!
Problems Powering On When the TV is turned on, the remote control receiver flashes 5 times before the 
screen turns on.
If you are having problems powering on your Samsung television, there are a 
number of things to check before calling the service department. Confirm that the 
TV's power cord is connected correctly at both ends and that the remote control 
is operating normally. Make sure that the antenna cable or cable TV cable is firmly 
connected. If you have a cable/satellite box confirm that it is plugged in and turned 
on.
Unable to find a 
Channel If your TV is not connected to a cable box or satellite box, run Setup
 (System > 
Setup ) or Auto Program ( Broadcasting > Auto Program).
The TV image does 
not look as good as it 
did in the store. Store displays are all tuned to digital, HD (high definition) channels.
If you have an analog cable/set top box, upgrade to a digital set top box. Use 
HDMI or Component cables to deliver HD (high definition) picture quality.
Many HD channels are upscaled from SD (Standard Definition) content. Look for a 
channel that is broadcasting true HD content.
 
● Cable/Satellite Subscribers: Try HD channels from the channel lineup.
 
● Air/Cable Antenna Connection: Try HD channels after running the Auto Program 
function.
Adjust the cable/satellite box's video output resolution to 1080i or 720p.
The picture is 
distorted. The compression of video content may cause picture distortions, especially in fast 
moving pictures from sports programs and action movies.
A weak or bad quality signal can cause picture distortions. This is not an issue 
with the TV.
Mobile phones used close to the TV (within 3.2 ft) may cause noise in analog and 
digital channels.
The color is wrong or 
missing. If you’re using a Component connection, make sure that the Component cables are 
connected to the correct jacks. Incorrect or loose connections may cause color 
problems or a blank screen.
The color is poor 
or the picture is not 
bright enough. Go to the Picture menu and then adjust the Picture Mode
, Brightness, Sharpness, 
and  Color settings.
See if Energy Saving  (System >  Eco Solution  > Energy Saving ) has been enabled.
Try resetting the picture. ( Picture > Picture Reset)
There is a dotted line 
on the edge of the 
screen. If the Picture Size has been set to 
Screen Fit, change the setting to  16:9.
Change the cable/satellite box resolution.
The picture is black 
and white. If you are using AV composite input, connect the video cable (yellow) to the TV's 
green component jack. 
						

							200201
I can't hear the sound clearly
Testing the Sound
MENU > Support >  Self Diagnosis >  Sound Test
Before you review the list of problems and solutions below, make sure that the TV Sound Output  menu 
item is set to TV Speaker, and then listen to the speakers again. If the TV still does not play audio, 
run the Sound Test. The Sound Test uses a built-in melody to check for sound problems. If the TV 
does not play sound during the Sound Test, or the sound is distorted, there may be a problem with 
the TV. Contact Samsung’s Call Center for assistance. If the TV plays the Sound Test melody without 
distortion, there may be a problem with an external device. Please check the connections. If the 
problem persists, refer to the external device’s user manual.
 
"
The UN110S9VF model has no built-in speaker. Be sure to connect an audio device to the UN110S9VF model 
for audio output.
The Problem Try this!
There is no sound or 
the sound is too low at 
maximum volume. Check the volume control of the device (cable/satellite box, DVD, Blu-ray, etc.) 
connected to your TV.
The picture is good but 
there is no sound. Set Sound > 
Speaker Settings  > TV Sound Output  to TV Speaker.
If you are using an external device, check the device’s audio output option. (For 
example, you may need to change your cable box’s audio option to HDMI if the 
box connected to your TV is using an HDMI cable.)
To listen to the computer sound, connect the external speaker to the computer’
s audio output connector.
If your TV has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by disconnecting and then reconnecting the 
device’s power cable.
The speakers are making 
an odd sound. Make sure that the audio cable is connected to the correct audio output 
connector on the external device.
For antenna or cable connections, check the signal information. A low signal 
level may cause sound distortions.
Run 
Sound Test ( Support > Self Diagnosis >  Sound Test).
In HDMI mode, an audio 
is intermittently stop or 
there is no sound. HDMI UHD Color
 is specific to a UHD source, and does not operate properly for 
any other source. In this case, navigate Picture >  Picture Options > HDMI UHD 
Color menu, and then set the HDMI UHD Color -enabled HDMI connector to Off. 
						

							202
I can't see 3D images clearly.
Testing 3D Picture Quality
MENU > Support >  Self Diagnosis >  3D Picture Test
 
"
To test 3D picture quality, you must be wearing 3D glasses and the glasses and the TV must be paired.
This function is only available with the UHD 9000, UN105S9WAF and SEK-2500U models.
Before you review the list of problems and solutions below, use 3D Picture Test to determine if the 
problem is caused by the TV. The 3D Picture Test displays a high definition picture you can examine 
for flaws or faults. If the test picture does not appear or there is noise or distortion, the TV may have 
a problem. Contact Samsung’s Call Center for assistance. If the test picture is displayed properly, 
there may be a problem with an external device. Please check the connections. If the problem persists, 
check the signal strength or refer to the external device’s user manual.
The Problem Try this!
The 3D glasses are not 
working correctly. Make sure the glasses are powered on.
The 3D feature may not work properly if there is another 3D product or an 
electronic device running nearby.
If there is a problem, keep other electronic devices as far away as possible from 
the 3D Active Glasses.
I can't see 3D images 
clearly. The ideal viewing distance is three times or more the height of the screen.
We also recommend watching 3D content with your eyes level with the screen.
The batteries in the 3D 
glasses are flat. Turn off the 3D glasses when they are not in use. If you leave the 3D glasses on, 
the battery lifespan is shortened. 
						

							202203
There is a problem with the broadcast.
The ProblemTry this!
The TV is not receiving 
all channels. If your TV is not connected to a cable box or satellite box:
 
● Confirm that the coaxial cable is securely connected to the TV. 
 
● If you are using an antenna, verify it is positioned correctly and the all the 
connections are secure.
 
● Run 
Setup ( System > Setup) or Auto Program ( Broadcasting > Auto Program).
There are no captions 
with digital channels. Go to Caption (
System > Accessibility > Caption) and change the Caption Mode .
Some channels may not have caption data.
The picture is distorted. The compression of the video content may cause picture distortions. This is 
especially true with fast moving pictures from sports programs and action 
movies.
A weak signal can cause picture distortions. This is not a problem with the TV.
My computer won't connect.
The Problem
Try this!
The "Mode Not 
Supported" message 
appears. Set your PC’s output resolution so it matches a resolution supported by the TV.
The video is OK but 
there is no audio. If you are using an HDMI connection, check the audio output setting on your PC.
If you are using a DVI to HDMI cable, a separate audio cable is required.
I can't connect to the Internet.
The Problem
Try this!
The wireless network 
connection failed. Confirm your wireless modem/router is on and connected to the Internet.
Reset your wireless modem/router by turning it off, waiting for 15 seconds, and 
then turning it on again.
Run Network Setup (
MENU > Network >  Network Settings ).
The software update 
over the Internet has 
failed. Check the network connection status (
MENU > Network >  Network Status ).
If the TV is not connected to a network, connect to a network.
The upgrade stops if you already have the latest software version. 
						

							204
The Schedule Recording/Timeshift function isn't 
working.
This function is not available in the U.S.A. and Canada.
There is something wrong with the TV. Try this!
The TV cannot recognize the 
USB device or the Format 
Device , Check Device , or 
Device Performance Test 
has failed. Refer to the USB device's manual and see if data can be stored on it.
Check if the USB device is in a locked state.
Check if the USB device was formatted when it was connected to a computer.
Formatting a USB device after connecting it to the TV may result in a 
formatting failure. If 
Device Performance Test or  Format Device has failed, 
there may be a problem with the USB device or its specifications. Try using a 
different USB device.
There is a message saying 
I need to format the USB 
storage device. Check if the USB device is in a locked state.
Use the USB recovery function to recover the USB device.
Schedule Recording cannot 
be used. Check if there is a USB device connected to the TV.
Check if the channel is a digital channel that can be recorded. Recording will 
automatically stop if the signal becomes too weak. The Timeshift function 
will not work if there isn't enough storage space on the USB device.
I get a performance test 
failure message and then 
Schedule Recording and the 
Timeshift operation stops 
working. This problem can occur when using a low-performance USB storage device 
that does not support recording. A USB hard drive with a speed of 5,400rpm 
or above is recommended. A USB memory Stick is not supported.