Samsung SyncMaster P50H, P50FP, P63FP Pdp Monitor User Manual

							 Note
When  Video 
Wall is running, the  Auto Adjustment, Image Lock, and Size functions are not
available.  Video Wall does not operate in  MagicInfo mode.
Video Wall MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   → ENTER 
→ [Video
Wall ] → ENTER → [Video Wall ] →   ,   → ENTER
Turns Off/On the 
Video Wall function of the selected display Off/On.
1. Off
2. On
Format MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   → ENTER 
→ [Video
Wall ] →   
→  ENTER → [Format] →   ,   → ENTER
The Format can be selected to see a divided screen.
1. Full
Provides a full screen without any margins.
2. Natural
Displays a natural image with the original aspect ratio intact.
Horizontal MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   → ENTER 
→ [Video
Wall ] →   
→    
→  ENTER → [Horizontal] →   ,   → ENTER
Adjusting the PDP Display 
						

							Sets how many parts the screen should be divided horizontally.
Five adjustment levels: 1, 2, 3, 4, and 5.
Vertical MENU →   →  →  → ENTER 
→ [Setup] →  →  →  →   →   →   → ENTER 
→ [Video
Wall ] →   
→    
→    
→  ENTER → [Vertical] →   ,   → ENTER
Sets how many parts the screen should be divided vertically.
Five adjustment levels: 1, 2, 3, 4, and 5.
Screen Divider MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   → ENTER 
→ [Video
Wall ] →   
→    
→    
→    
→  ENTER → [Screen Divider] The screen can be divided into several images. A number of screens can be selected with a
different layout when dividing.
•

Select a mode in Screen Divider.
• Select a display in Display Selection.
• The selection will be set up by pressing a number in the selected mode.
Safety Screen  The 
Safety 
Screen  function is used to prevent afterimages that may appear when a still picture
is displayed on the screen over a long time. Adjusting the PDP Display 
						

							• The Safety Screen function scrolls the screen for the specified period of time.
• This function is not available when the power is turned off.
MENU  →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen]
Pixel Shift
Pixel Shift MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] → ENTER → [Pixel Shift] → ENTER → [Pixel Shift] →   ,   → ENTER
To prevent after-images on the screen you can use this function, so that every minute pixels
on the PDP are moved in horizontal or vertical direction.
1.
Off
2. On  Note
The Pixel Shift is not available when  Video Wall is On.
Horizontal Dot MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] → ENTER → [Pixel Shift] →   → ENTER → [Horizontal Dot] →   ,   → ENTER
Sets how many pixels the screen moves horizontally.
Five adjustment levels: 0, 1, 2, 3, and 4.
Vertical Line MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] → ENTER → [Pixel Shift] →   →  → ENTER → [Vertical Line] →   ,   → ENTER
Adjusting the PDP Display 
						

							Sets how many pixels the screen moves vertically.
Five adjustment levels: 0, 1, 2, 3, and 4.
Time MENU →   →  →  → ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] → ENTER → [Pixel Shift] →   →  →  → ENTER → [Time] →   ,   → ENTER
Set the time interval for performing the horizontal or vertical movement, respectively.
Timer
Timer MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   → ENTER → [Timer] → ENTER → [Timer] →   ,   → ENTER
You can set the timer for Screen Burn Protection.
If 

you start the operation to erase any residual image, the operation will be performed for the
set period of time and then automatically finish.
1. Off
2. On
Mode MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   → ENTER → [Timer] →   → ENTER → [Mode] →   ,   → ENTER
Adjusting the PDP Display 
						

							You can change the 
Safety Screen Type.
1. Scroll
2. Bar
3. Eraser
4. All White
5. Pattern
Period MENU →   →  →  → ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   → ENTER → [Timer] →   →   → ENTER → [Period] →   ,   → ENTER
Use this function to set the execution period for each mode set in the timer.
Time MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   → ENTER → [Timer] →   →   →   → ENTER → [Time] →   ,   → ENTER
Within the set period of time specify a time for execution.
•
Mode- Scroll : 1~5 sec
• Mode- Bar, Eraser : 10~50 sec
• Mode- All White, Pattern : 1, 5, 10, 20 30  min
Adjusting the PDP Display 
						

							Scroll
MENU →   →  →  → ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   →   → ENTER → [Scroll]
This function prevents after-images on the screen by moving all the pixels on the PDP ac-
cording to a pattern.
Use 

this function when there are remaining after-images or symbols on the screen, especially
when you displayed a still image on the screen for a long time.
Bar MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   →   →   →ENTER → [Bar]
This  function  prevents  after-images  on  the  screen  by  moving  long  black  and  white  vertical
lines.
Eraser MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   →   →   →   →ENTER → [Eraser]
This function prevents after-images on the screen by moving a rectangular pattern.
All White MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   →   →   →   →   →ENTER → [All White]
Adjusting the PDP Display 
						

							This function prevents after-images on the screen by changing the color of pixels to white.
Use 
this function when there are remaining after-images or symbols on the screen, especially
when you displayed a still image on the screen for a long time.
Pattern MENU →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   → ENTER 
→ [Safety
Screen] →   →   →   →   →   →   →ENTER → [Pattern]
This function prevents after-images on the screen by moving a diagonal pattern stored in the
panel repeatedly.
Resolution Select  MENU 
→   →  →  →
 ENTER  → [Setup]  →  →  →  →   →   →   →   →   →
ENTER  →
[Resolution Select ] →   ,   → ENTER
When  the  picture  is  not  displayed  properly  on  the  screen  when  setting  the  graphics  card
resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz
or 

1366  x768  @  60Hz,  by  using  this  function(Resolution  Select),  you  can  have  the  picture
displayed on the screen in the specified resolution.  Note
Available in  PC mode only
1. Off
2. 1024 X 768 Adjusting the PDP Display 
						

							3.
1280 X 768
4. 1360 x 768
5. 1366 X 768  Note
Selecting  the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz,
1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz.
Power On Adjustment  MENU 
→   →  →  →
 ENTER  → [Setup]  →  →  →  →   →   →   →   →   → → ENTER
→ [Power On Adjustment ] →   ,   → ENTER
Adjusts the Power On time for the screen.
Caution: Set the Power On time to be longer to avoid overvoltage.
Side Gray  MENU 
→   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   →   → →  →
ENTER → [Side Gray] →   ,   → ENTER
Select the brightness of the grey for the screen background.
1.
Off
2. Light
3. Dark
Reset Reverts 

the  product  settings  to  factory  defaults.  The  Reset  function  is  only  available  when
PC /  DVI is being used. Adjusting the PDP Display 
						

							MENU 
→   →  →  → ENTER 
→ [Setup] →  →  →  →   →   →   →   →   → →  → 
→ ENTER → [Reset ]
Image Reset  MENU 
→   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   →   → →  → 
→ ENTER → [Reset ]
→ ENTER → [Image Reset ] →  ,  → ENTER
 Note
Available in  PC mode only  Note
The Reset function is not available when  Video Wall is On.
Color Reset  MENU 
→   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   →   →   → →  → 
→ ENTER → [Reset ]
→  →
 ENTER → [Color Reset ] →  ,   → ENTER
OSD Rotation 
MENU 
→   →   →   →
 ENTER  →   →   →   →   →   →   →   →   →   →   → 
→   →   →   → ENTER → [OSD Rotation ]
→   ,   → ENTER
OSD Rotate
1. Landscape
2. Portrait
Multi Control
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
HDMI
•  
Component Adjusting the PDP Display 
						

							Multi Control 
Assigns an individual ID to the SET.
MENU → 
 →  →  →   → ENTER → [Multi Control ] → ENTER →   ,   → [0~9]
•
ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use 
to  select  the  transmitter  functions  of  the  individual  SET.  Only  a  SET  where  the  ID
corresponds to the transmitter setting becomes activated. Adjusting the PDP Display