Samsung SyncMaster P50H, P50FP, P63FP Pdp Monitor User Manual

							 
 
 
1) Scroll - This function is used to remove the afterimages that occur when a still screen is displayed on the selected display  
for  a  long time.  
2) Pixel Shift  - This allows the screen to be moved finely at the specified time interval.
3) Safety Screen  - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time.  The Interval item is used to set the repetition cycle in hour units and the Time item is 
used to set the time when the Safety Screen function must be performed.  
The Type item can be set to Scroll, Pixel, Bar, Eraser, All White, or Pattern.  
4) Safety Screen2  - This function is used to prevent afterimages from occurring. There are five (5) types that you can select and control with this function. 
For the Scroll type, the Time item can be set to 1, 2, 3, 4 or 5. For the Bar and Eraser types, it can be set 
to 10, 20, 30, 40 or 50. For the All White and Pattern type, it can be set to 1, 5, 10, 20 or 30.   
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
The Maintenance Control feature is available only for the displays whose power status is ON.
 Maintenance  
 
Video Wall 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							 
 
 
 
 
1) Video Wall  - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider)  - The screen can be divided into. You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC program supplied by Samsung supports up to 5x5 LCD Displayes.
3) On / Off   -
Turns on/off the Video Wall function of the selected display. 
4) Format  -
The format can be selected to see a divided screen. 
zFull 
zNatural  
You may not operate this function in MagicInfo.
The Input source of TV works only on TV model. 
The Maintenance Control function is available only for the displays where the power status is ON.
Troubleshooting 
 
1.The display you wish to control does not appear on the Power Control Info Grid 
- Check the connection of RS232C. (Check if it is properly connected to the Com1 port) 
						

							 
 
 
 
  
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have 
the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and  25. (Adjust using the Display menu)  
Note : A Display Set ID must be a value between 0 and  25 . 
2. The display you wish to control does not appear on the other Control Info Grids  - Check to see if the display power is ON. (You can check this in Power Control Info Grid)
- Check if you can change the input source of the display. 
3. The dialogue box appears repeatedly.  - Check to see if the display you wish to control is selected. 
4. Both On Timer and Off Timer have been set but different time is showing.  - Apply current time to synchronize the display clocks.
5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit  the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal 
fu nction s. 
   This program may malfunction due to problems in communication circuits or interference from electronic 
appliances nearby.
Settings Value Display In Multiple Display Mode 
 
 
 
When there are more than one displays connected, the settings values are displayed as follows.
1. No selection: Displays the Factory Default Value.
2. Selected one display: Fetches and displays the settings value for the selected display.
3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of  ID 1, fetches and displays the value of ID3.
4. Selected all sets using Select All: Returns to the Factory Default Value. 
						

							Adjusting the PDP Display
Input
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
HDMI
•  
Component
Source List  MENU → ENTER → [Input] → ENTER → [Source List] →   ,   → ENTER
Use to select 
PC, DVI  or other external input sources connected to the PDP Display. Use to
select the screen of your choice.
1. PC
2. DVI
3. AV
4. HDMI
5. Component
6. BNC  Note
•

The direct button on the remote control is the 'SOURCE' button.
Edit Name MENU → ENTER → [Input] →   → ENTER → [Edit Name] →   ,   → ENTER 
						

							Name  the  input  device  connected  to  the  input  jacks  to  make  your  input  source  selection
easier.
VCR 
/ DVD  / Cable 
STB / HD STB  / Satellite STB / AV Receiver /  DVD Receiver / Game /
Camcorder / DVD Combo /  DHR / PC  Note
•

When connecting a PC to the HDMI or DVI terminal, set  Edit Name to PC.
• In other cases, set Edit Name to AV.
• However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal.
• The Picture menu changes depending on the input signal and  Edit Name.
Picture [PC / DVI/ BNC]
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
MagicBright  MENU →   → ENTER → [Picture] → ENTER → [MagicBright] →   ,   → ENTER
MagicBright 

is a new feature providing the optimum viewing environment depending on the
contents of the image you are watching. Currently four different modes are available:  Enter-
tain,  Internet,  Text and  Custom. Each mode has its own pre-configured brightness value. You
can easily select one of the four settings by simply pressing the  MagicBright control button.
1. Entertain
High brightness Adjusting the PDP Display 
						

							For watching motion pictures such as a DVD or VCR.
2. Internet
Medium brightness
For working with a mixture of images such as texts and graphics.
3. Text
Normal brightness
For documents or works involving heavy text.
4. Custom
Although 
the  values  are  carefully  chosen  by  our  engineers,  the  pre-configured  values
may not be comfortable to your eyes depending on your taste.
If this is the case, adjust the brightness and contrast by using the OSD menu.
Custom  By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
MENU → 
 → ENTER → [Picture] →   → ENTER → [Custom]
 Note
By 

adjusting the  picture using the  Custom function,  MagicBright will change to  Custom mode.
Contrast MENU →   → 
ENTER 
→ [Picture] →   → ENTER 
→ [Custom] → ENTER→ [Contrast] → ,   → ENTER
Adjusts the Contrast.
Brightness MENU →   → 
ENTER 
→ [Picture] →   → ENTER 
→ [Custom] →   → ENTER
→ [Bright-
ness] →  ,   → ENTER
Adjusts the Brightness.
Sharpness MENU →   → 
ENTER 
→ [Picture] →   → ENTER 
→ [Custom] →   →   → ENTER 
→
[Sharpness] →  ,   → ENTER
Adjusts the Sharpness.Adjusting the PDP Display 
						

							Color Tone 
MENU →   → ENTER → [Picture] →   →   →ENTER → [Color Tone] →   ,   → ENTER
The color tones can be changed.
1.
Off
2. Cool
3. Normal
4. Warm
5. Custom  Note
If 
you  set  the  Color  Tone  to Cool,  Normal,  Warm,  or  Custom,  the  Color  Temp  function  is
disabled.
If you set the  Color Tone to Off, the Color Control function is disabled
Color Control  Adjusts individual Red, Green, Blue color balance.
MENU → 
 → ENTER → [Picture] →   →   → → ENTER → [Color Control]
 Note
If you adjust the picture by using the  Color Control function, Color Tone  will turn to the  Cus-
tom mode.
Red MENU →   →
 ENTER  → [Picture] →   →   →  →
 ENTER  → [Color Control ] → ENTER  →
[Red] →  ,   → ENTER
Green
MENU →   → 
ENTER 
→ [Picture] →   →   →  → ENTER 
→ [Color Control ] →   → ENTER
→ [Green] →  ,   → ENTER Adjusting the PDP Display 
						

							Blue
MENU →   → ENTER 
→ [Picture] →   →   →  → ENTER 
→ [Color Control ] →   →   →
ENTER → [Blue] →  ,   → ENTER
Color Temp. 
MENU 
→   → 
ENTER 
→ [Picture] →   →   →  → ENTER 
→ [Color Temp. ] →  ,   → ENTER
Color Temp. is a measure of the 'warmth' of the image colors.
 Note
This function is only enabled if the  Color Tone is set to Off.
Image Lock  Image Lock
 
 is used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
(Available in  PC mode only)
MENU →   → ENTER → [Picture] →   →   →  →  → ENTER → [Image Lock]
Coarse MENU →   →
 ENTER  → [Picture]  →   →   →  →  →
 ENTER  → [Image Lock ] →  ENTER
→ [Coarse] →  ,   → ENTER
Removes  noise  such  as  vertical  stripes.  Coarse  adjustment  may  move  the  screen  image
area. You may relocate it to the center using the horizontal control menu.
Fine MENU →   → 
ENTER 
→ [Picture] →   →   →  →  → ENTER 
→ [Image  Lock ] →   →
ENTER → [Fine] →  ,   → ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
H-Position MENU →   → 
ENTER 
→ [Picture] →   →   →  →  → ENTER 
→ [Image Lock] →   → 
→ ENTER → [H-Position] →  ,   → ENTER
Adjusts the screen location horizontally.Adjusting the PDP Display 
						

							V-Position
MENU →   →
 ENTER  → [Picture]  →   →   →  →  →
 ENTER  → [Image Lock ] →   →   →
 → ENTER → [V-Position] →  ,   → ENTER
Adjusts the screen location vertically.
Auto Adjustment  MENU →   → ENTER → [Picture] →   →   →   →  →  → ENTER → [Auto Adjustment ]
The values of 
Fine, Coarse,  Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in  PC mode only)  Note
The direct button on the remote control is the 'AUTO' button.
Signal Balance  This is used to make up for the weak RGB signal transmitted by a long signal cable.
MENU 
→   → ENTER 
→ [Picture] →   →   →   →  →  →  → ENTER 
→ [Signal  Bal-
ance]
(Available in  PC mode only)
Signal Balance MENU →   → 
ENTER 
→ [Picture] →   →   →   →  →  →  → ENTER 
→ [Signal  Bal-
ance] → ENTER → [Signal Balance] →   ,   → ENTER
Selects either On or Off with the signal control.
Signal Control MENU →   →
 ENTER  → [Picture] →   →   →   →  → →  → ENTER 
→ [Signal Balance ]
→   →
 ENTER → [Signal Control]
1. R-Gain
MENU  →   → 
ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance] →  → ENTER → [Signal Control] → ENTER → [R-Gain] →  ,   → ENTER
Adjusting the PDP Display 
						

							2.
G-Gain
MENU  →   → ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance] →  → 
ENTER 
→ [Signal Control ] →   → ENTER 
→ [G-Gain] →  ,   → ENTER
3.
B-Gain
MENU  →   → 
ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance]  →  → 
ENTER 
→ [Signal Control ] →   →   →
 ENTER  → [B-Gain]  →  ,   →
ENTER 4.
R-Offset
MENU  →   → 
ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance]  →  → ENTER 
→ [Signal Control ] →  →   →   →
 ENTER  → [R-Offset]  →  ,
 → ENTER
5.
G-Offset
MENU  →   → 
ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance] →   → 
ENTER 
→ [Signal  Control] →   →   →   →   → ENTER 
→ [G-Off-
set] →  ,   → ENTER
6.
B-Offset
MENU  →   → 
ENTER 
→ [Picture] →   →   →   →  → →  → ENTER 
→ [Signal
Balance] →   → 
ENTER 
→ [Signal Control] →   →   →   →   →   → ENTER 
→ [B-
Offset] →  ,   → ENTER
Size 
MENU 
→   →
 ENTER  → [Picture]  →   →   →   →  → →  →  → ENTER 
→ [Size]  →   ,
 → ENTER Adjusting the PDP Display