Samsung SyncMaster P50H, P50FP, P63FP Pdp Monitor User Manual

							The Size can be switched.
1. 16:9
2. 4:3
Picture [ AV / HDMI / DVI / COMPONENT]
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
HDMI / DVI
•  
Component
Mode  MENU →   → ENTER → [Picture] → ENTER → [Mode] →   ,   → ENTER
The  PDP  Display  has  four  automatic  picture  settings  ("
Dynamic",  "Standard",  "Movie"  and
"Custom") that are preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
1. Dynamic
2. Standard
3. Movie
4. Custom  Note
The direct button on the remote control is the 'P.MODE' button.
Custom  By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
MENU → 
 → ENTER → [Picture] →   → ENTER → [Custom]
Contrast MENU →   → 
ENTER 
→ [Picture] →   → ENTER 
→ [Custom] → ENTER→ [Contrast] → ,   → ENTERAdjusting the PDP Display 
						

							Adjusts the Contrast.
Brightness MENU →   → ENTER 
→ [Picture] →   → ENTER 
→ [Custom] →   → ENTER
→ [Bright-
ness] →  ,   → ENTER
Adjusts the Brightness.
Sharpness MENU →   → 
ENTER 
→ [Picture] →   → ENTER 
→ [Custom] →   →   → ENTER
→
[Sharpness] →  ,   → ENTER
Adjusts the picture Sharpness.
Color MENU →   →
 
ENTER  → [Picture]  →   →
 ENTER  → [Custom]  →   →   →   →
 ENTER →
[Color] →  ,   → ENTER
Adjusts the picture Color.
Tint MENU →   →
 
ENTER  → [Picture]  →   →
 ENTER  → [Custom]  →   →   →  →   →
 ENTER
→ [Tint] →  ,   → ENTER
Adds a natural tone to the display.
Color Tone  MENU →   → ENTER → [Picture] →   →   → ENTER → [Color Tone] →   ,   → ENTER
The color tones can be changed. The individual Color components are also user adjustable.Adjusting the PDP Display 
						

							1.
Off
2. Cool2
3. Cool1
4. Normal
5. Warm1
6. Warm2  Note
If 
you set the  Color Tone to Cool2,  Cool1, Normal,  Warm1, or  Warm2, the  Color Temp function
is disabled.
Color Temp.   MENU 
→   → 
ENTER 
→ [Picture] →   →  →  → ENTER 
→ [Color Temp.] →  ,   → ENTER
Color temp. is a measure of the 'warmth' of the image colors.
 Note
This function is only enabled if the  Color Tone is set to Off.
Size  MENU 
→   →
 ENTER  → [Picture]  →   →   →   →  →
 ENTER  → [Size]  →   ,   →
 ENTER The Size can be switched.
1. 16:9 - Sets the picture to 16:9 wide mode.
2. Zoom 1 - Magnifies the size of the picture on the screen.
3. Zoom 2 - Magnifies the size of the picture more than “ Zoom 1”.
4. 4:3 - Sets the picture to 4:3 normal mode.
5. Just Scan  

- Displays the input scenes as they are without any cutoff when HDMI 720p,
1080i, 1080p signals are input.  Note
Certain 
 external  devices  may  feed  the  display  an  out  of  spec  signal  that  may  cause  cutoff
even when using the  Just Scan feature.Adjusting the PDP Display 
						

							ZOOM1, ZOOM2 will be unavailabel in 
HDMI mode. Note
The Position and Reset functions are available when  Zoom1 or Zoom2 is run.
Digital NR (Digital Noise Reduction)  MENU 
→   →
 ENTER  → [Picture]  →   →   →   →  →  →
 ENTER  → [Digital NR ] →   , 
→ ENTER
Turns the Digital Noise Reduction feature 
Off/On.  The Digital Noise Reduction feature allows
you to enjoy clearer and crisper images.
1. Off
2. On
Film Mode  MENU 
→   →
 
ENTER  → [Picture]  →   →   →   →   →   →   →
 ENTER  → [Film Mode  ] →  ,   → ENTER
The Film Mode feature offers you a theater-quality viewing experience.
(In 
HDMI 

mode,  this  function  can  be  available  when  the  input  signal  is  interlaced  scan;  it
cannot be available with progressive scan signal.)
1. Off
2. On
Sound
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
HDMI Adjusting the PDP Display 
						

							•
 Component
Mode  MENU →   →  → ENTER → [Sound] → ENTER → [Mode] →   ,   → ENTER
The PDP Display has a built-in high fidelity stereo amplifier.
1.
Standard
Selects Standard for the standard factory settings.
2. Music
Selects Music when watching music videos or concerts.
3. Movie
Selects Movie when viewing movies.
4. Speech
Selects Speech when watching a show that is mostly dialogue (i.e., news).
5. Custom
Selects  Custom 
if you want to adjust the settings according to your personal preferences.
Custom  The sound settings can be adjusted to suit your personal preferences.
MENU → 
 →  → ENTER → [Sound] → → ENTER → [Custom ]
 Note
•

You can hear the sound even when sound value is set to 0.
• If you adjust sound using  Custom function, Mode will turn to Custom mode.
Bass MENU →   →  →
 
ENTER  → [Sound]  → → ENTER 
→ [Custom  ]→ ENTER→ [ Bass] →  ,
 → ENTER
Emphasizes low frequency audio.Adjusting the PDP Display 
						

							Treble
MENU →   →  → ENTER 
→ [Sound] → → ENTER 
→ [Custom  ]→ →
ENTER→ [Treble] → ,   → ENTER
Emphasizes high frequency audio.
Balance MENU →   →  → 
ENTER 
→ [Sound] → → ENTER 
→ [Custom  ]→ → →
ENTER→ [Bal-
ance] →  ,   → ENTER
Allows you to Adjusts the sound balance between the left and right speakers.
Auto Volume  MENU 
→   →  → 
ENTER 
→ [Sound] → → → ENTER 
→ [Auto Volume] →   ,   → ENTER
Reduces the difference in volume control between broadcasters.
1.
Off
2. On
SRS TS XT  MENU 
→   →  → 
ENTER 
→ [Sound] → → → → ENTER 
→ [SRS TS XT] →   ,   → ENTER
SRS TS XT
 
 is a patented SRS technology that solves the problem of playing 5.1 multichannel
content  over  two  speakers.  TruSurround  delivers  a  compelling,  virtual  surround  sound  ex-
perience through any two-speaker playback system, including internal television speakers. It
is fully compatible with all multichannel formats.
1. Off Adjusting the PDP Display 
						

							2.
On  Note
The direct button on the remote control is the 'SRS' button.
Setup
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
HDMI
•  
Component
Language  MENU →   →  →  → ENTER → [Setup] → ENTER → [Language ] →   ,   → ENTER
You can choose one of 13 languages.
 Note
The  language chosen affects only the language of the OSD. It has no effect on any software
running on the computer.
Time  Selects from one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer.
MENU →   →  →  → ENTER → [Setup] →   → ENTER → [Time ]
Clock Set MENU →   →  →  → 
ENTER 
→ [Setup] →   → ENTER 
→ [Time ] →  ENTER → [Clock
Set] →   ,   →  ,   → ENTER Adjusting the PDP Display 
						

							Current Time Setting.
Sleep Timer MENU →   →  →  → ENTER 
→ [Setup] →   → ENTER 
→ [Time ] →   → ENTER
→ [Sleep
Timer] →   ,   → ENTER
Turns the PDP Display off automatically at certain times.
1.
Off
2. 30
3. 60
4. 90
5. 120
6. 150
7. 180
On Timer MENU →   →  →  →
 
ENTER  → [Setup]  →   →
 ENTER  → [Time  ] →  →   →
 ENTER →
[On Timer] →   ,   /  ,   → ENTER
Turns the PDP Display on automatically at a preset time. Controls the mode and the volume
level at the time the PDP Display turns on automatically.
Off Timer MENU →   →  →  →
 ENTER  → [Setup]  →   →
 ENTER  → [Time  ] →  →  →   →
 ENTER
→ [Off Timer] →   ,   /  ,   → ENTERAdjusting the PDP Display 
						

							Turns the PDP Display off automatically at a preset time.
Menu Transparency MENU 
→   →  →  →
 ENTER  → [Setup]  →  →   →
 ENTER  → [Menu Transparency ] →   ,
 → ENTER
Change the transparency of the background of the OSD.
1.
High
2. Medium
3. Low
4. Opaque
Safety Lock PIN  MENU 
→   →  →  →
 
ENTER  → [Setup]  →  →  →   →
 ENTER  → [Safety Lock PIN  ] →
[0∼9] → [0∼9] → [0∼9] → [0∼9] The password can be changed.
•

Change Lock Pin :Changes the product pin number.
• Lock On/Off  : When it is set to  Lock On, the remote control buttons are inactive and the
pin number input window will be displayed on the screen. Input the pin number to change
the setting to  Lock Off. To return to  Lock On, change the setting in the  Lock On/ Off mode.
Adjusting the PDP Display 
						

							 Note
The preset password for the PDP Display is "0000"
Initializing the Safety Lock pin number: INFO + EXIT + MUTE
Energy Saving MENU 
→   →  →  →
 ENTER  → [Setup]  →  →  →  →   →
 ENTER  → [Energy Saving ] →  ,   → ENTER
This feature adjusts the power consumption of the unit in order to save energy.
1.
Off
2. On
HDMI Black Level  MENU 
→   →  →  →
 ENTER  → [Setup]  →  →  →  →   →   →
 ENTER  → [HDMI Black
Level ] →   ,   → ENTER
When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation
in the screen quality, such as an increase in the black level, a low contrast, or discoloration,
etc., 

depending on the external device connected. In this case, adjust the screen quality of
your TV by configuring the  HDMI black level.
1. Normal
2. Low
Video Wall  A 
Video Wall  
 is a set of video screens connected together, so that each screen shows a part
of the whole picture or where the same picture is repeated on each screen.
When the Video Wall is on, you can adjust the Video Wall screen setting.
MENU  →   →  →  → 
ENTER 
→ [Setup] →  →  →  →   →   →   → ENTER 
→ [Video
Wall ] Adjusting the PDP Display