Samsung SyncMaster 460DRn, 460DR LCD Display User Manual

Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock   - Available only for PC, BNC.
2) Coarse  - Adjusts Coarse of the selected display.
3) Fine  - Adjusts Fine of the selected display.
4) Position  - Adjusts Position of the selected display.
5) Auto Adjustment  - Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for which...

An Info Grid showing several basic data items appears. 
1) Maintenance  - Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control  - Automatically adjusts the backlight of the selected display at a specified time.  The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control  - Allows you to adjust the backlight of the selected display regardless of the time.  The Auto Lamp Control automatically turns off if you adjust...

1) Safety Screen - Eliminates the afterimages that can result when the selected display stays in Pause mode for an extended period of time. You can set the repeat cycle timer by selecting the Interval by hour and Second by second. 
It can be set to Scroll, Pixel, Bar and Eraser by Screen Type.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Setting Second, you can set to 1, 2, 3, 4, 5 for Scroll Type and to 10, 20, 30, 40, 50 for Pixel, Bar,...

1) Video Wall  - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider)  - The screen can be divided into. You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC program supplied...

- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and  25. (Adjust using the Display menu)  
Note : A Display Set ID must be a value between 0 and  25 .
2. The display you wish to control does not appear on the other Control Info Grids  - Check to see if the display power is ON. (You can check this...

Adjusting the LCD Display
Direct Functions
Available Modes
•  PC / BNC / DVI
•  AV
•  S-Video
•  Component
•  HDMI
•  MagicInfo
 Note
• The MagicInfo menu is available in DRn models.
MagicInfo   Note
• The MagicInfo menu is available in DRn models. Moves to the MagicInfo OSD screen. 

MDC 
Moves to the Multi Control OSD screen.
LOCK  This is the function that locks the OSD in order to keep the current sta\
tes of settings or prevent
others from adjusting the current settings.
 Note
• When setting the Lock function, you can only operate the power and lock \
buttons on the remote control and set.
• Resetting the password for the function key lock. Press MUTE  →
 1 → 8 → 6 → On. The
password will be reset to 0000. The remote control is required for res\
etting the password.
Lock On Hold...

Lock Off
Hold down the MENU button for more than five (5) seconds to deactivate\
 the OSD adjustment
lock function.
Input
Available Modes
•  PC / BNC / DVI
•  AV
•  S-Video
•  Component
•  HDMI
•  MagicInfo
 Note
• The MagicInfo menu is available in DRn models. Adjusting the LCD Display 

Source List 
Use to select PC, 
BNC, or other external input sources connected to the LCD Display. Use
to select the screen of your choice.
1. PC
2. BNC
3. DVI
4. AV
5. S-Video
6. Component
7. HDMI
8. MagicInfo  Note
• The direct button on the remote control is the SOURCE button.
• PIP  turns off when the LCD Display is switched to an external source.
•
For PC and DVI, this is deactivated if the cable is disconnected.
MENU → ENTER → ENTER →   ,   → ENTER
PIP  Note
Available Modes:  PIP ON
When external...

 Note
• More than one  PIP cannot be overlapped on screen as  BNC and the Component use
the same terminal.
• If you select  ,   ,   in Size, Position and Transparency will not be activated.
PIP Turns the PIP Screen Off/On.
•
Off
• On  Note
The direct button on the remote control is the PIP button.
MENU → ENTER →   ,   → ENTER → ENTER →   ,   → ENTER
Source Adjusting the LCD Display