Samsung SyncMaster 460DRn, 460DR LCD Display User Manual

Moves from one menu item to another horizontally or adjusts selected
menu values. When OSD is not on the screen, push the button to adjust
volume.
ENTER button [ENTER]
Activates a highlighted menu item.
SOURCE button [SOURCE]
Switches from PC mode to Video mode. Changing the source is only al-
lowed for external devices that are connected to the LCD Display at the
time.
[PC] → [
BNC] → [ DVI] → [AV] → [S-Video] → [ Component] → [HDMI]
→ [MagicInfo]
>> Click here to see an animation clip  Note
• The...

Power indicator
Shows PowerSaver mode by blinking green
 Note
See PowerSaver  described in the manual for further information regarding
power saving functions. For energy conservation, turn your LCD Display
OFF when it is not needed or when leaving it unattended for long periods\
. Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Rear
 Note
For detailed information concerning cable connections, refer to Connecti\
ng Cables under
Setup. The LCD Display s configuration at...

 REMOTE OUT/IN
You can use a wired remote control by con-
necting it to your LCD Display.  RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port  DVI / PC / HDMI IN [PC/DVI/BNC AUDIO
IN] (PC/DVI/BNC/HDMI Audio Connection
Terminal (Input))  DVI / PC / HDMI IN [HDMI]
Connect the HDMI terminal at the back of
your LCD Display to the HDMI terminal of
your digital output device using a HDMI ca-
ble.  DVI / PC / HDMI IN [RGB](PC Video
Connection Terminal)
Using a D-Sub Cable (15 pin...

 AV AUDIO IN [L-AUDIO-R] (LCD Display
Audio Connection Terminal (Input))  AV OUT [VIDEO](VIDEO Connection
Terminal)
AV mode (Output)  AV IN [VIDEO](VIDEO Connection Ter-
minal) (Input)  AV OUT [S-VIDEO] (S-VIDEO Connec-
tion Terminal)
S-VIDEO mode (Output)  AV IN [S-VIDEO](S-VIDEO Connection
Terminal) (Input)  EXT SPEAKER (8 Ω)
[- - L - +, - - R - +]
(EXT Speaker Connection Terminal)  AUDIO OUT [L-AUDIO-R] (LCD Display
Audio Connection Terminal (Output))AUDIO
OUT is the terminal for sound output of PC,...

Remote Control
 Note
The performance of the remote control may be affected by a TV or other e\
lectronic device
operating near the LCD Display , causing a malfunction due to interferen\
ce with the frequen-
cy. ON / OFF
MagicInfo
MDC
LOCK
MagicInfo buttons
+100 DEL 
VOL
 MUTE
 TTX/MIX
 MENU
 ENTER
 P.MODE
AUTO
 ENTER/PRE-CH
 CH/P 
 SOURCE
 INFO
 EXIT
Up-Down Left-Right buttons
 S.MODE
STILL
FM RADIO
P.SIZE
 SRS
 DUAL/MTS
 PIP
 SOURCE
SWAP
 SIZE
 REW
 STOP
Introduction 

 PLAY/PAUSE
 FF
1. ON / OFF Turns the LCD Display On/Off.
2. MagicInfo MagicInfo Quick Launch Button.
(Applicable to the DRn model only)
3. MDC MDC Quick Launch Button.
4. LOCK Activates or deactivates all function keys on both the remote
control and the LCD Display except for the Power and LOCK
buttons.
5. MagicInfo buttons
MagicInfo Quick Launch Button.(Applicable to the DRn model only)
• Alphanumeric: Used to enter the Internet address.
• DEL: Functions as the backspace.
• SYMBOL: Used to enter the...

MagicBright is a new feature providing the optimum view-
ing environment depending on the contents of the image
you are watching. Then push button again to circle through
available preconfigured modes. (
Entertain → Internet →
Text → Custom )
13. AUTO Adjusts the screen display automatically in  PC mode. By
changing the resolution in the control panel, auto function is
performed.
14.   ENTER/PRE-CH
Returns to the immediately previous channel.
- This fuction does not work for this LCD Display.
15.  CH/P...

FM Stereo Mono Mono
Manual
Change
Stereo Mono ↔ Stereo
SAP Mono ↔ SAP Mono
- This fuction does not work for this LCD Display.
26.   PIP
Every time you press the button, a PIP screen appears.
27.   SOURCE
Changes the source of the PIP window signal.
28. SWAP Swaps the contents of the PIP and main image. The image
in the PIP window will appear on the main screen, and the
main screen image will appear in the PIP window.
29.   SIZE
Switches the PIP Picture Size.
30.   REW
Rewind
31.   STOP
Stop
32.   PLAY /...

Connections
Connecting a Computer
Using a Power cord with Earth
•
In the event of failure, the earth lead may cause electric shock. Make
sure to wire the earth lead in correctly, before connecting the AC power\
.
When un-wiring the earth lead, make sure to disconnect the AC power
in advance.  Note
AV input devices such as DVD players, VCRs or camcorders as well as your\
 computer can
be connected to the LCD Display. For detailed information on connecting \
AV input devices,
refer to the User Controls...

 
Using the BNC (Analog) connector on the video card.
• Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V
ports on the back of your LCD Display and the 15 pin D-sub Port on
the computer. Connect the audio cable for your LCD Display to the audio port on the ba\
ck
of your computer.
 Note
• Turn on both your computer and the LCD Display.
• The DVI cable or BNC cable is optional.
•
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices Using a Power...