Samsung SyncMaster 460DRn, 460DR LCD Display User Manual

Connecting a VCR
AV input devices such as VCRs or Camcorders are connected via the AV
IN [VIDEO] or AV IN [S-VIDEO] of the LCD Display using an S-VHS or
BNC cable.
Connect the Audio (L) and Audio (R) terminals of a VCR or Camcorders\
to the LCD Display s AV AUDIO IN [L-AUDIO-R] using audio cables.
 Note
• Select  AV or  S-Video
 for a connected VCR or Camcorder using the SOURCE button on
the front of the LCD Display or on the remote control.
• Then, start the VCR or Camcorders with a tape inserted.
•...

 Note
• Select  Component  for the connection to a DVD player using the SOURCE button on the
front of the LCD Display or on the remote control.
•
Then, start the DVD Player with a DVD disc inserted.
• A component cable is optional.
• For an explanation of Component video, consult your DVD manual.
Connecting a Camcorder Locate the AV output jacks on the camcorder. They are usually found on
the side or back of the camcorder. Connect a set of audio cables between\
the AUDIO OUTPUT jacks on the camcorder...

Connecting a DTV Set Top Box
Connect a Component cable between the BNC / COMPONENT IN - PR,
Y, PB port on the LCD Display and the PR, Y, PB jacks on the Set Top
Box.
Connect a set of audio cables between the COMPONENT AUDIO IN [L-
AUDIO-R] on the LCD Display and the AUDIO OUT jacks on the Set Top
Box.
 Note
• Select Component for the connection to a DTV Set Top Box using the SOURC\
E button
on the front of the LCD Display or on the remote control.
• For an explanation of Component video, see your Set Top...

Connecting to a Wired Remote Control
 Note
• You can control your LCD Display by allowing it to receive the remote co\
ntrol signals of
other devices through the REMOTE OUT terminal.
• You can control a device by allowing it to receive remote control signal\
s from other devices
through the REMOTE IN terminal.
• Restrictions: Available only if other devices support the wired remote c\
ontrol I/O terminals.
Connecting Using a HDMI Cable  Note
• Input devices such as digital DVD are connected to the HDMI...

 Note
• Connect the DVI output terminal of a digital output device to the HDMI I\
N terminal of the LCD Display using a DVI to HDMI cable.
• Connect the red and white jacks of an RCA to stereo (for PC) cable to \
the same colored
audio output terminals of the digital output device, and connect the opp\
osite jack to the
HDMI / PC / DVI-D AUDIO IN terminal of the LCD Display.
Connecting a LAN Cable Using a Power cord with Earth
•
In the event of failure, the earth lead may cause electric shock. Make
sure...

 Note
(Applicable to the DRn model only)  Note
You can connect USB devices such as a mouse or keyboard. Connections 

Introduction
A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously 
operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and 
a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a 
display.
Main Screen 
  Click Start > Program > Samsung > MDC System to start the program. 
  Select a set to see the volume of the selected set within the...

Main IconsSelect Button
RemoconInfo Grid
Safety LockDisplay Selection
Port SelectionControl Tools 
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote control signal receiving function of the display unit. 
3. Set the Safety Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and set.
4. The setting for the PC Serial Port can change. The original value is COM1. 
5. Click Select all or Clear to select...

1. The Multiple Display Control is originally set to COM1.
2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu.
3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 
4. The selected port is stored in the program and used for the next program as well.  
 Power Control 
1. Click Power Control of the main icons and the Power Control screen appears. 

Info Grid shows some basic information necessary to Power Control.
1)   (Power Status)
 2) Input 
  3) Image Size
  4) On Timer
  5) Off Timer2. Use the Select All button or Check Box to choose a display to control.
 Power Control allows controlling some of the functions of the selected display. 
1) Power On/Off