Samsung SyncMaster 460DRn, 460DR LCD Display User Manual

Selects the input source for the PIP.
•
PC : AV / S-Video / Component / HDMI Mode
• BNC :  AV / S-Video / HDMI Mode
• DVI :  AV / S-Video / Component Mode
• AV / S-Video : PC / BNC /  DVI Mode
• Component : PC / DVI Mode
• HDMI : PC / BNC Mode  Note
The direct button on the remote control is the SOURCE button.
MENU → ENTER →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER
Swap Swaps the contents of the PIP and main image.
The image in the PIP window will appear on the main screen, and the main\
 screen...

Size
Changes the Size of the PIP window.
 Note
The direct button on the remote control is the SIZE button.
MENU → ENTER →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER
Position Changes the Position of the PIP window.
MENU → ENTER → 
 ,   → ENTER →   ,   → ENTER →   ,   → ENTER
Adjusting the LCD Display 

Transparency
Adjusts the Transparency of PIP windows.
•
High
• Medium
• Low
• Opaque
MENU → ENTER →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER
Edit Name Name the input device connected to the input jacks to make your input so\
urce selection
easier.
1.
PC Adjusting the LCD Display 

2.
BNC
3. DVI
4. AV
5. S-Video
6. Component
7. HDMI
MENU → ENTER →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER
Picture [PC / BNC / DVI / MagicInfo Mode]
Available Modes
•  PC / BNC / DVI
•  AV
•  S-Video
•  Component
•  HDMI
•  MagicInfo
 Note
• The MagicInfo menu is available in DRn models.
MagicBright  MagicBright is a new feature providing the optimum viewing environment depending on\
 the
contents of the image you are watching. Currently four different modes a\
re available: 
Enter-
tain,...

You can easily select one of the four settings by simply pressing the 
MagicBright control
button.
1. Entertain
High brightness
For documentations or works involving heavy text.
2. Internet
Medium brightness
For working with a mixture of images such as texts and graphics.
3. Text
Normal brightness
For documentations or works involving heavy text.
4. Custom
Although the values are carefully chosen by our engineers, the pre-confi\
gured values
may not be comfortable to your eyes depending on your taste.
If...

Adjusts the Contrast.
2. Brightness
Adjusts the Brightness.  Note
By adjusting the picture using the  Custom function, MagicBright will change to  Custom
mode.
MENU →   ,   → ENTER →   ,   → ENTER → ENTER →   ,   /  ,   → ENTER
Color Tone  The color tones can be changed.
1.
Off
2. Cool
3. Normal
4. Warm
5. Custom
(Available in  PC, BNC mode only)  Note
If you set the  Color Tone to Cool,  Normal,  Warm, or  Custom, the  Color Temp function is
disabled.
If you set the  Color Tone to Off, the Color Control...

Color Control 
Adjusts individual Red, Green, Blue color balance.
(Available in 
PC, BNC mode only)
1. Red
2. Green
3. Blue  Note
If you adjust the picture by using the  Color Control function, Color Tone will turn to the
Custom mode.
MENU →   ,   → ENTER →   ,   → ENTER → ENTER →  ,   /  ,  →ENTER
Color Temp  Adjusting the LCD Display 

Color Temp is a measure of the warmth of the image colors.
 Note
This function is only enabled if the  Color Tone is set to Off.
MENU →   ,   → ENTER →   ,   → ENTER →  ,   → ENTER
Image Lock  Image Lock is used to fine-tune and get the best image by removing noise that crea\
tes
unstable images with jitters and shakiness. If satisfactory results are \
not obtained using the
Fine adjustment, use the Coarse adjustment and then use Fine again.
(Available in 
PC, BNC mode only)
Coarse Removes noise such as...

Fine
Removes noise such as horizontal stripes. If the noise persists even aft\
er Fine tuning, repeat
it after adjusting the frequency (clock speed).
MENU → 
 ,   → ENTER →   ,   → ENTER →   ,   → ENTER →  ,   → ENTER
Position Adjusts the screen location horizontally and vertically.
MENU → 
 ,   → ENTER →   ,   → ENTER →   ,   → ENTER →   ,   /  ,   → ENTER
Adjusting the LCD Display 

Auto Adjustment 
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in 
PC, BNC mode only)  Note
The direct button on the remote control is the AUTO button.
MENU →   ,   → ENTER →   ,   → ENTER
Signal Balance  This is used to make up for the weak RGB signal transmitted by a long si\
gnal cable.
(Available in 
PC, BNC mode only)
Signal Balance Selects either On or Off with the signal control.Adjusting...