Samsung SyncMaster 460DRn, 460DR LCD Display User Manual

Safety Screen 
The Safety Screen function is used to prevent afterimages that may appear when a still
picture is displayed on the screen over a long time.
• The 
Safety Screen 
 function scrolls the screen for the specified period of time.
• This function is not available when the power is turned off.
Safety Screen Determines whether to turn the 
Safety Screen  function Off or On.
1. Off
2. On
MENU →   ,   → ENTER →   ,   → ENTER → ENTER →   ,   → ENTER
Interval Adjusting the LCD Display 

Determines the time interval to run the 
Safety Screen operation. (1~10 Hour)
The time is calculated on the basis of the power on time.
By default, the time is set to 10 hours.
1. 1~10  Hour
MENU →
   ,   → ENTER →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER
Second Determines the time period to run the 
Safety Screen operation. (1~5 Second)
By default, the time is set to 5 seconds.
• Type-Scroll : 1~5 Second
• Type-Pixel, Bar, Eraser : 10~50 Second
MENU →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER →...

You can change the 
Safety Screen Type.
1. Scroll
2. Pixel
3. Bar
4. Eraser
MENU →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER
Resolution Select  When the picture is not displayed properly on the screen when setting th\
e graphics card
resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360\
 x 768@ 60Hz,
1366 x768 @ 60Hz or 2728 x768 @ 60Hz, by using this function(Resolution\
 Select), you can
have the picture displayed on the screen in the specified resolution.
 Note...

Lamp Control 
Adjusts the inverter lamp in order to reduce energy consumption.
 Note
This function does not operate when  Dynamic Contrast is set to On in AV, S-Video,  Com-
ponent, HDMI modes.
MENU →   ,   → ENTER →   ,   → ENTER → ENTER →  ,   → ENTER
Power On Adjustment  Adjusts the Power On time for the screen.
Caution: Set the Power On time to be longer to avoid overvoltage.
MENU → 
 ,   → ENTER →   ,   → ENTER → ENTER →   ,   → ENTER
Adjusting the LCD Display 

Reset
Reverts the product settings to factory defaults. DVI source, the Reset function is only avail-
able when  PC / DVI is being used.  Note
The Reset function is not available when  Video Wall is On.
Image Reset   Note
Available in  PC/BNC mode only
MENU →   ,   → ENTER →   ,   → ENTER → ENTER →  ,  → ENTER
Color Reset  MENU →   ,   → ENTER →   ,   → ENTER →   ,   → ENTER →  ,  → ENTER
Adjusting the LCD Display 

Multi Control
Available Modes
•  PC / BNC / DVI
•  AV
•  S-Video
•  Component
•  HDMI
•  MagicInfo
 Note
• The MagicInfo menu is available in DRn models.
Multi Control Assigns an individual ID to the SET.
ID Setup Assigns distinctive IDs to the SET.
MENU → 
 ,   → ENTER → ENTER → [0~9]Adjusting the LCD Display 

ID Input
Use to select the transmitter functions of the individual SET. Only a SE\
T where the ID cor-
responds to the transmitter setting becomes activated.
MENU → 
 ,   → ENTER →   ,   → ENTER → [0~9]
MagicInfo
Available Modes
•  PC / BNC / DVI
•  AV
•  S-Video
•  Component
•  HDMI
•  MagicInfo
 Note
• The MagicInfo menu is available in DRn models.  Note
• The operating system for this set only supports English so the other lan\
guages might be corrupted on the screen.
• For  MagicInfo
, a remote...

•
Do not unplug the LAN cable used for the network (ex: video display). \
Otherwise, the
program (MagicInfo) may stop. If you do unplug the cable, restart the \
system.
• Do not unplug the LAN cable used by an USB device (ex: video display).\
 Otherwise, the program (MagicInfo) may stop.
• To access other sources, press the SOURCE button in  MagicInfo
.
• The preset password for the LCD Display is 000000.
• The server programs Power-On option works only if the LCD Displays pow\
er is com-
pletely shut...

1. Select MagicInfo in the Source List menu.
2. The MUISetup screen appears. Select the language you want to use.
3. Press the Install button.
If you select Do not show again and click the Install button, the Schedu\
ler screen is displayed
after rebooting.
4. Connect your keyboard and mouse and press the “ALT + F12” keys \
on your keyboard.
5. The Windows Desktop is displayed and the MagicInfo Pro icon (the ima\
ge will be inserted)
appears. Move the cursor over the icon.Adjusting the LCD Display 

 Note
If the  MagicInfo  icon is not displayed on the notification area, double click the  MagicInfo
icon on the window desktop. The icon will appear. 6. Right-click on the MagicInfo Pro icon (the image will be inserted) \
and select Program -->
Player from the displayed menu.
7. The Player screen of MagicInfo Pro is displayed.Adjusting the LCD Display