Samsung SyncMaster 460DRn, 460DR LCD Display User Manual

							Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock   - Available only for PC, BNC.
2) Coarse  - Adjusts Coarse of the selected display.
3) Fine  - Adjusts Fine of the selected display.
4) Position  - Adjusts Position of the selected display.
5) Auto Adjustment  - Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for which the power status is ON.
 Maintenance  
Lamp Control 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							An Info Grid showing several basic data items appears. 
1) Maintenance  - Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control  - Automatically adjusts the backlight of the selected display at a specified time.  The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control  - Allows you to adjust the backlight of the selected display regardless of the time.  The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. 
The Maintenance Control feature is available only for the displays whose power status is ON.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
 Maintenance  
Scroll 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							1) Safety Screen - Eliminates the afterimages that can result when the selected display stays in Pause mode for an extended period of time. You can set the repeat cycle timer by selecting the Interval by hour and Second by second. 
It can be set to Scroll, Pixel, Bar and Eraser by Screen Type.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Setting Second, you can set to 1, 2, 3, 4, 5 for Scroll Type and to 10, 20, 30, 40, 50 for Pixel, Bar, and 
Eraser Type. 
The Maintenance Control feature is available only for the displays whose power status is ON.
 Maintenance  
Video Wall 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							1) Video Wall  - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider)  - The screen can be divided into. You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC program supplied by Samsung supports up to 5x5 LCD Displayes.
3) On / Off   - Turns on/off the Video Wall function of the selected display. 
4) Format  - The format can be selected to see a divided screen. 
zFull 
zNatural 
You may not operate this function in MagicInfo.
The Input source of TV works only on TV model. 
The Maintenance Control function is available only for the displays where the power status is ON.
Troubleshooting 
1.The display you wish to control does not appear on the Power Control Info Grid 
- Check the connection of RS232C. (Check if it is properly connected to the Com1 port) 
						

							- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and  25. (Adjust using the Display menu)  
Note : A Display Set ID must be a value between 0 and  25 .
2. The display you wish to control does not appear on the other Control Info Grids  - Check to see if the display power is ON. (You can check this in Power Control Info Grid)
- Check if you can change the input source of the display. 
3. The dialogue box appears repeatedly.  - Check to see if the display you wish to control is selected. 
4. Both On Timer and Off Timer have been set but different time is showing.  - Apply current time to synchronize the display clocks.
5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit  the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal 
functions. 
 This program may malfunction due to problems in communication circuits or interference from electronic 
appliances nearby.
Settings Value Display In Multiple Display Mode
When there are more than one displays connected, the settings values are displayed as follows.
1. No selection: Displays the Factory Default Value.
2. Selected one display: Fetches and displays the settings value for the selected display.
3. Selected one display (ID1) and add another display (ID3):  The program, which was displaying the settings value of 
ID 1, fetches and displays the value of ID3.
4. Selected all sets using Select All: Returns to the Factory Default Value. 
						

							Adjusting the LCD Display
Direct Functions
Available Modes
•  PC / BNC / DVI
•  AV
•  S-Video
•  Component
•  HDMI
•  MagicInfo
 Note
• The MagicInfo menu is available in DRn models.
MagicInfo   Note
• The MagicInfo menu is available in DRn models. Moves to the MagicInfo OSD screen. 
						

							MDC 
Moves to the Multi Control OSD screen.
LOCK  This is the function that locks the OSD in order to keep the current sta\
tes of settings or prevent
others from adjusting the current settings.
 Note
• When setting the Lock function, you can only operate the power and lock \
buttons on the remote control and set.
• Resetting the password for the function key lock. Press MUTE  →
 1 → 8 → 6 → On. The
password will be reset to 0000. The remote control is required for res\
etting the password.
Lock On Hold down the MENU button for more than five (5) seconds to activate t\
he OSD adjustment
lock function.Adjusting the LCD Display 
						

							Lock Off
Hold down the MENU button for more than five (5) seconds to deactivate\
 the OSD adjustment
lock function.
Input
Available Modes
•  PC / BNC / DVI
•  AV
•  S-Video
•  Component
•  HDMI
•  MagicInfo
 Note
• The MagicInfo menu is available in DRn models. Adjusting the LCD Display 
						

							Source List 
Use to select PC, 
BNC, or other external input sources connected to the LCD Display. Use
to select the screen of your choice.
1. PC
2. BNC
3. DVI
4. AV
5. S-Video
6. Component
7. HDMI
8. MagicInfo  Note
• The direct button on the remote control is the SOURCE button.
• PIP  turns off when the LCD Display is switched to an external source.
•
For PC and DVI, this is deactivated if the cable is disconnected.
MENU → ENTER → ENTER →   ,   → ENTER
PIP  Note
Available Modes:  PIP ON
When external AV devices such as VCRs or DVDs are connected to the LCD D\
isplay ,  PIP
allows you to watch video from those devices in a small window super-imp\
osed on the PC
Video signal. ( Off/On)Adjusting the LCD Display 
						

							 Note
• More than one  PIP cannot be overlapped on screen as  BNC and the Component use
the same terminal.
• If you select  ,   ,   in Size, Position and Transparency will not be activated.
PIP Turns the PIP Screen Off/On.
•
Off
• On  Note
The direct button on the remote control is the PIP button.
MENU → ENTER →   ,   → ENTER → ENTER →   ,   → ENTER
Source Adjusting the LCD Display