Samsung SyncMaster 320MP-2 LCD Monitor User Manual

 
Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock   - Available only for PC, BNC.
2) Coarse  - Adjusts Coarse of the selected display.
3) Fine  - Adjusts Fine of the selected display.
4) Position  - Adjusts Position of the selected display.
5) Auto Adjustment  - Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for...

 
 
An Info Grid showing several basic data items appears. 
1) Maintenance  -
Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control  - Automatically adjusts the backlight of the selected display at a specified time.  
The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control  - Allows you to adjust the backlight of the selected display regardless of the time.  
The Auto Lamp Control automatically turns off if you...

 
 
 
1) Scroll - This function is used to remove the afterimages that occur when a still screen is displayed on the selected display  
for  a  long time.  
2) Pixel Shift  - This allows the screen to be moved finely at the specified time interval.
3) Safety Screen  - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time.  The Interval item is used to set the repetition cycle in hour units and the Time item is 
used to set...

 
 
 
 
 
1) Video Wall  - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider)  - The screen can be divided into. You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC...

 
 
 
 
  
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have 
the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and  25. (Adjust using the Display menu)  
Note : A Display Set ID must be a value between 0 and  25 . 
2. The display you wish to control does not appear on the other Control Info Grids  - Check to see if the display power is ON. (You...

Adjusting the LCD Display
Input
Available Modes
•  PC / BNC / DVI
•  AV
•  HDMI
•  Component
 Note
• The TV menu is available when a TV tuner box is installed.
• The MagicInfo menu is available when a network box is installed.
Source List  MENU → ENTER → [Input] → ENTER→[Source List] →   ,   → ENTER
Use to select 
PC, DVI or other external input sources connected to the LCD Display. Use to se\
lect the
screen of your choice.
1. PC
2. DVI
3. AV
4. HDMI
This is deactivated when a TV tuner box is...

BNC mode is not supported if the component cable is connected. To use 
BNC mode, remove the
component cable and connect the BNC cable.
6. Component
Component mode is not supported if the BNC cable is connected. To use  Component mode,
remove the BNC cable and connect the Component cable.  Note
• The direct button on the remote control is the SOURCE button.
• For PC and  DVI
, this is deactivated if the cable is disconnected.
Edit Name MENU → ENTER → [Input] →   → ENTER → [Edit Name] →   ,   → ENTER
Name...

• The MagicInfo menu is available when a network box is installed.
MagicBright  MENU →   → ENTER → [Picture] → ENTER →[MagicBright] →   ,   →ENTER
MagicBright is a feature providing the optimum viewing environment depending on the\
 contents of
the image you are watching. Currently four different modes are available\
: 
Entertain, Internet, Text
and Custom. Each mode has its own pre-configured brightness value. You can easily \
select one of the
four settings by simply pressing the  MagicBright control...

Adjusts the Contrast.
Brightness MENU →   → ENTER → [Picture] →   → ENTER → [Custom] →   → ENTER → [Bright-
ness] →  ,   → ENTER
Adjusts the Brightness.
Sharpness MENU →   → ENTER → [Picture] →   → ENTER → [Custom] →   →   → ENTER →
[Sharpness] →  ,   → ENTER
Adjusts the Sharpness.
Color Tone  MENU →   → ENTER → [Picture] →   →   → ENTER → [Color Tone] →   ,   → ENTER
The color tones can be changed.
1.
Off
2. Cool
3. Normal
4. Warm
5. Custom  Note
If you set the Color Tone to Cool, Normal, Warm, or...

 Note
If you adjust the picture by using the  Color Control function, Color Tone will turn to the  Custom
mode.
Red MENU →   →
 ENTER  → [Picture]  →   →   →   →
 ENTER  → [Color Control ] →  ENTER  →
[Red] →  ,   → ENTER
Green
MENU →   →
 ENTER → [ Picture] →   →   →   →
 ENTER → [ Color Control ] →   →
 ENTER
→ [Green] →  ,   → ENTER
Blue
MENU →   →
 ENTER  → [Picture]  →   →   →    →
 ENTER  → [Color Control ] →   →   →
ENTER → f [Blue] →  ,   → ENTER
Color Temp 
MENU →   → ENTER → [Picture] →   →   →...