Samsung SyncMaster 320MP-2 LCD Monitor User Manual

Adjusts the Power On time for the screen.
Caution: Set the Power On time to be longer to avoid overvoltage.
Side Gray  MENU →   →   →   → ENTER → [Setup] →   →   →   →   →   →   →   →   →   → 
→ ENTER → [Side Gray] →   ,   → ENTER
Select the brightness of the grey for the screen background.
1.
Off
2. Light
3. Dark
Reset Reverts the product settings to factory defaults. The Reset function is \
only available when  PC / DVI
is being used.
MENU  →   →   →   →
 ENTER  → [Setup]  →   →   →   →   →   →   →   →...

 Note
The Reset function is not available when  Video Wall is On.
Color Reset  MENU 
→   →   →   →
 ENTER  → [Setup]  →   →   →   →   →   →   →   →   →   →   →
 → ENTER → [Reset ] →   → ENTER → [Color Reset ] →  ,   → ENTER
OSD Rotation 
MENU 
→   →   →   →
 ENTER  → [Setup]  →   →   →   →   →   →   →   →   →   →   →
 →   →   → ENTER → [OSD Rotation ]
→  ,     → ENTER
OSD Rotate
1. Landscape
2. Portrait
Lamp Control  MENU 
→   →   →   →
 ENTER  → [Setup]  →   →   →   →   →   →   →   →   →   →   →
 →   →...

•
 HDMI
•  Component
Multi Control  Assigns an individual ID to the SET.
MENU → 
 →   →   →   → ENTER → [Multi Control ] → ENTER →   ,   → [0~9]
•
ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SE\
T where the ID corresponds
to the transmitter setting becomes activated. Adjusting the LCD Display 

Troubleshooting
Self-Test Feature Check
 Note
Check the following items yourself before calling for assistance. Contac\
t a Service Center for problems
that you cannot solve by yourself.
Self-Test Feature Check 1. Turn off both your computer and the LCD Display.
2. Unplug the video cable from the back of the computer.
3. Turn on the LCD Display.The figure shown below (Check Signal Cable
) appears on a black background when the LCD
Display is working normally even though no video signal is detected: Whi\...

•
Do not use benzene, thinner or other flammable substan-
ces, or a wet cloth.
• We recommend that a SAMSUNG cleansing agent is used
to prevent damage to the screen.
2) Maintaining the Flat Panel Display Screen.
Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner.
(They may cause flaws or deformation of the screen sur-
face.)
• The user will be required to pay costs and related expenses
for repairing damages caused.
Symptoms and Recommended Actions  Note
A LCD...

A: Check if the signal cable between the computer and the LCD Display is se\
curely connected.
(Refer to Connecting a Computer)
Problems related to the Screen  Note
Problems related to the LCD Display screen and their solutions are liste\
d.
Q: The screen is blank and the power indicator is off.
A: Ensure that the power cord is firmly connected and the LCD Display is on\
. (Refer to the Connecting a Computer)
Q:  Check Signal Cable
 message.
A: Ensure that the signal cable is firmly connected to the PC...

A: Adjust color using Custom under OSD Color Adjustment menu.
Q: The color image is distorted by dark shadows.
A: Adjust color using Custom under OSD Color Adjustment menu.
Q:
The color white is poor.
A:
Adjust color using Custom under OSD Color Adjustment menu.
Q: The Power Indicator blinks.
A: The LCD Display is currently saving the changes made in the settings to \
the OSD memory.
Q: The screen is blank and the power indicator light blinks every 0.5 or 1 \
seconds.
A: The LCD Display is using its...

A: Check if the power is on.
A: Check if the power cord is securely connected.
A: Check if a special fluorescent or neon lamp is on in the vicinity.
 
Q & A Q: How can I change the frequency?
A: The frequency can be changed by reconfiguring the video card.  Note
That video card support can vary, depending on the version of the driver\
 used. (Refer to the
computer or the video card manual for details.)
Q: How can I Adjusts the resolution?
A: Windows XP:
Set the resolution in the Control Panel  →...

Set the resolution at the Control Panel 
→ Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windo\
ws / Computer Man-
ual).
Q: How can I clean the outer case/LCD Panel?
A: Disconnect the power cord and then clean the LCD Display with a soft clo\
th, using either a
cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any wate\
r enter the LCD Display.
Q: How can I play the video?
A: The video supports the MPEG1 and WMV...

Specifications
General
General
Model Name SyncMaster 320MP-2
LCD Panel
Size
32 Diagonal (80 cm)
Display area 697.68 mm (H) X 392.3 mm (V)
Pixel Pitch
0.51075 mm (H) X 0.51075 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical
56 ~ 85 Hz
Display Color 16.7 M
Resolution
Optimum resolution
1360 x 768 @ 60 Hz / 1366 x 768 @ 60 Hz depends on graphics
card used
Maximum resolution 1366x768@60Hz
Input Signal, Terminated
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ± 5 %
Separate...