Samsung SyncMaster 320MP-2 LCD Monitor User Manual

							 
Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock   - Available only for PC, BNC.
2) Coarse  - Adjusts Coarse of the selected display.
3) Fine  - Adjusts Fine of the selected display.
4) Position  - Adjusts Position of the selected display.
5) Auto Adjustment  - Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for which the power status is ON.
 Maintenance  
 
Lamp Control 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							 
 
An Info Grid showing several basic data items appears. 
1) Maintenance  -
Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control  - Automatically adjusts the backlight of the selected display at a specified time.  
The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control  - Allows you to adjust the backlight of the selected display regardless of the time.  
The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. 
The Maintenance Control feature is available only for the displays whose power status is ON.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
 Maintenance  
 
Scroll 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen.
  
						

							 
 
 
1) Scroll - This function is used to remove the afterimages that occur when a still screen is displayed on the selected display  
for  a  long time.  
2) Pixel Shift  - This allows the screen to be moved finely at the specified time interval.
3) Safety Screen  - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time.  The Interval item is used to set the repetition cycle in hour units and the Time item is 
used to set the time when the Safety Screen function must be performed.  
The Type item can be set to Scroll, Pixel, Bar, Eraser, All White, or Pattern.  
4) Safety Screen2  - This function is used to prevent afterimages from occurring. There are five (5) types that you can select and control with this function. 
For the Scroll type, the Time item can be set to 1, 2, 3, 4 or 5. For the Bar and Eraser types, it can be set 
to 10, 20, 30, 40 or 50. For the All White and Pattern type, it can be set to 1, 5, 10, 20 or 30.   
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
The Maintenance Control feature is available only for the displays whose power status is ON.
 Maintenance  
 
Video Wall 
1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen. 
						

							 
 
 
 
 
1) Video Wall  - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider)  - The screen can be divided into. You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC program supplied by Samsung supports up to 5x5 LCD Displayes.
3) On / Off   -
Turns on/off the Video Wall function of the selected display. 
4) Format  -
The format can be selected to see a divided screen. 
zFull 
zNatural  
You may not operate this function in MagicInfo.
The Input source of TV works only on TV model. 
The Maintenance Control function is available only for the displays where the power status is ON.
Troubleshooting 
 
1.The display you wish to control does not appear on the Power Control Info Grid 
- Check the connection of RS232C. (Check if it is properly connected to the Com1 port) 
						

							 
 
 
 
  
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have 
the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and  25. (Adjust using the Display menu)  
Note : A Display Set ID must be a value between 0 and  25 . 
2. The display you wish to control does not appear on the other Control Info Grids  - Check to see if the display power is ON. (You can check this in Power Control Info Grid)
- Check if you can change the input source of the display. 
3. The dialogue box appears repeatedly.  - Check to see if the display you wish to control is selected. 
4. Both On Timer and Off Timer have been set but different time is showing.  - Apply current time to synchronize the display clocks.
5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit  the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal 
fu nction s. 
   This program may malfunction due to problems in communication circuits or interference from electronic 
appliances nearby.
Settings Value Display In Multiple Display Mode 
 
 
 
When there are more than one displays connected, the settings values are displayed as follows.
1. No selection: Displays the Factory Default Value.
2. Selected one display: Fetches and displays the settings value for the selected display.
3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of  ID 1, fetches and displays the value of ID3.
4. Selected all sets using Select All: Returns to the Factory Default Value. 
						

							Adjusting the LCD Display
Input
Available Modes
•  PC / BNC / DVI
•  AV
•  HDMI
•  Component
 Note
• The TV menu is available when a TV tuner box is installed.
• The MagicInfo menu is available when a network box is installed.
Source List  MENU → ENTER → [Input] → ENTER→[Source List] →   ,   → ENTER
Use to select 
PC, DVI or other external input sources connected to the LCD Display. Use to se\
lect the
screen of your choice.
1. PC
2. DVI
3. AV
4. HDMI
This is deactivated when a TV tuner box is installed.
5. BNC 
						

							BNC mode is not supported if the component cable is connected. To use 
BNC mode, remove the
component cable and connect the BNC cable.
6. Component
Component mode is not supported if the BNC cable is connected. To use  Component mode,
remove the BNC cable and connect the Component cable.  Note
• The direct button on the remote control is the SOURCE button.
• For PC and  DVI
, this is deactivated if the cable is disconnected.
Edit Name MENU → ENTER → [Input] →   → ENTER → [Edit Name] →   ,   → ENTER
Name the input device connected to the input jacks to make your input so\
urce selection easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /
Camcorder / DVD Combo / DHR / PC
Picture [PC / BNC / DVI Mode]
Available Modes
•  PC / BNC / DVI
•  AV
•  HDMI
•  Component
 Note
• The TV menu is available when a TV tuner box is installed. Adjusting the LCD Display 
						

							• The MagicInfo menu is available when a network box is installed.
MagicBright  MENU →   → ENTER → [Picture] → ENTER →[MagicBright] →   ,   →ENTER
MagicBright is a feature providing the optimum viewing environment depending on the\
 contents of
the image you are watching. Currently four different modes are available\
: 
Entertain, Internet, Text
and Custom. Each mode has its own pre-configured brightness value. You can easily \
select one of the
four settings by simply pressing the  MagicBright control button.
1. Entertain
High brightness
For documents or works involving heavy text.
2. Internet
Medium brightness
For working with a mixture of images such as texts and graphics.
3. Text
Normal brightness
For documents or works involving heavy text.
4. Custom
Although the values are carefully chosen by our engineers, the pre-confi\
gured values may not be
comfortable to your eyes depending on your taste.
If this is the case, adjust the brightness and contrast by using the OSD\
 menu.
Custom  By using the on-screen menus, the contrast and brightness can be changed\
 to your personal preference.
MENU → 
 → ENTER → [Picture] →   → ENTER → [Custom]
 Note
By adjusting the picture using the  Custom function, MagicBright will change to  Custom mode.
Contrast MENU →   →
 ENTER  → [Picture]  →   →
 ENTER  → [Custom]  → ENTER  → [Contrast]  →  ,
 → ENTER Adjusting the LCD Display 
						

							Adjusts the Contrast.
Brightness MENU →   → ENTER → [Picture] →   → ENTER → [Custom] →   → ENTER → [Bright-
ness] →  ,   → ENTER
Adjusts the Brightness.
Sharpness MENU →   → ENTER → [Picture] →   → ENTER → [Custom] →   →   → ENTER →
[Sharpness] →  ,   → ENTER
Adjusts the Sharpness.
Color Tone  MENU →   → ENTER → [Picture] →   →   → ENTER → [Color Tone] →   ,   → ENTER
The color tones can be changed.
1.
Off
2. Cool
3. Normal
4. Warm
5. Custom  Note
If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled.
If you set the Color Tone to Off, the Color Control function is disabled
Color Control  Adjusts individual Red, Green, Blue color balance.
MENU → 
 → ENTER → [Picture] →   →   →   → ENTER → [Color Control]
Adjusting the LCD Display 
						

							 Note
If you adjust the picture by using the  Color Control function, Color Tone will turn to the  Custom
mode.
Red MENU →   →
 ENTER  → [Picture]  →   →   →   →
 ENTER  → [Color Control ] →  ENTER  →
[Red] →  ,   → ENTER
Green
MENU →   →
 ENTER → [ Picture] →   →   →   →
 ENTER → [ Color Control ] →   →
 ENTER
→ [Green] →  ,   → ENTER
Blue
MENU →   →
 ENTER  → [Picture]  →   →   →    →
 ENTER  → [Color Control ] →   →   →
ENTER → f [Blue] →  ,   → ENTER
Color Temp 
MENU →   → ENTER → [Picture] →   →   →   → ENTER → [Color Temp] →  ,   → ENTER
Color Temp is a measure of the warmth of the image colors.
 Note
This function is only enabled if the  Color Tone is set to Off.
Image Lock  Image Lock is used to fine-tune and get the best image by removing noise that crea\
tes unstable images
with jitters and shakiness. If satisfactory results are not obtained usi\
ng the Fine adjustment, use the
Coarse adjustment and then use Fine again.
(Available in 
PC mode only)
MENU →   → ENTER → [Picture] →   →   →   →   → ENTER → [Image Lock]
Coarse MENU →   →
 ENTER → [ Picture] →   →   →   →   →
 ENTER → [ Image Lock] →  ENTER
→ [Coarse] →  ,   → ENTER Adjusting the LCD Display