Samsung SyncMaster 320MP-2 LCD Monitor User Manual
Have a look at the manual Samsung SyncMaster 320MP-2 LCD Monitor User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 18
Installation VESA Bracket
• When installing VESA, make sure to comply with the international VESA st\
andards.
•Purchasing VESA Bracket and Installation Information : Please contact yo\
ur nearest SAMSUNG
Distributor to place an order. After your order is placed, installation \
professionals will visit you
and install the bracket.
• At least 2 persons are needed in order to move the LCD Display.
• SAMSUNG is not responsible for any product damage or any injury caused b\
y installation at
customers...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-17.png "Page 18
Installation VESA Bracket
• When installing VESA, make sure to comply with the international VESA st\
andards.
•Purchasing VESA Bracket and Installation Information : Please contact yo\
ur nearest SAMSUNG
Distributor to place an order. After your order is placed, installation \
professionals will visit you
and install the bracket.
• At least 2 persons are needed in order to move the LCD Display.
• SAMSUNG is not responsible for any product damage or any injury caused b\
y installation at
customers...")
![Page 19
Wall Bracket Installation
• Contact a technician for installing the wall bracket.
•SAMSUNG Electronics is not responsible for any damages to the product or\
harm to customers
when the installation is done by the customer.
• This product is for installing on cement walls. The product may not stay\
in place when installed
on plaster or wood.
Components Only use the components and accessories shipped with the product. Wall Bracket(1)
Hinge(Left 1, Right
1)Plastic
Hanger
(4)Screw
(A)(11)
Screw(B)...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-18.png "Page 19
Wall Bracket Installation
• Contact a technician for installing the wall bracket.
•SAMSUNG Electronics is not responsible for any damages to the product or\
harm to customers
when the installation is done by the customer.
• This product is for installing on cement walls. The product may not stay\
in place when installed
on plaster or wood.
Components Only use the components and accessories shipped with the product. Wall Bracket(1)
Hinge(Left 1, Right
1)Plastic
Hanger
(4)Screw
(A)(11)
Screw(B)...")
![Page 20
2.
Before drilling into the wall, check if the length between the two locki\
ng holes at the back of the
product is correct.
If the length is too short or long, loosen all or some of the 4screws on\
the wall bracket to adjust
the length. A -
Length between the two locking holes
3. Check the installation diagram and mark the drill points on the wall. Us\
e the 5.0 mm bit to drill
holes deeper than 35 mm. Fix each anchor in the corresponding hole. Matc\
h each of the brackets
and hinge holes to the...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-19.png "Page 20
2.
Before drilling into the wall, check if the length between the two locki\
ng holes at the back of the
product is correct.
If the length is too short or long, loosen all or some of the 4screws on\
the wall bracket to adjust
the length. A -
Length between the two locking holes
3. Check the installation diagram and mark the drill points on the wall. Us\
e the 5.0 mm bit to drill
holes deeper than 35 mm. Fix each anchor in the corresponding hole. Matc\
h each of the brackets
and hinge holes to the...")
![Page 21
2. Insert the screw B into the plastic hanger.
Notice
• Mount the product on the wall bracket and make sure it is properly fixed\
to the left and right
plastic hangers.
• Be careful when installing the product on the bracket as fingers can be \
caught in the holes.
• Make sure the wall bracket is securely fixed to the wall, or the product\
may not stay in place
after installation.
3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear h\
oles of the product. 4.
Remove safety pin (3)...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-20.png "Page 21
2. Insert the screw B into the plastic hanger.
Notice
• Mount the product on the wall bracket and make sure it is properly fixed\
to the left and right
plastic hangers.
• Be careful when installing the product on the bracket as fingers can be \
caught in the holes.
• Make sure the wall bracket is securely fixed to the wall, or the product\
may not stay in place
after installation.
3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear h\
oles of the product. 4.
Remove safety pin (3)...")
![Page 22
A -
LCD Display
B - Wall Bracket
C - Wall
Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket.
2.
Hold the product at the top in the center and pull it forward (directio\
n of the arrow) to adjust the
angle. Note
You can adjust the bracket angle between -2° and 15°. Make sure to use the top center, and not the left or the right side of t\
he product to adjust the angle. Introduction](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-21.png "Page 22
A -
LCD Display
B - Wall Bracket
C - Wall
Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket.
2.
Hold the product at the top in the center and pull it forward (directio\
n of the arrow) to adjust the
angle. Note
You can adjust the bracket angle between -2° and 15°. Make sure to use the top center, and not the left or the right side of t\
he product to adjust the angle. Introduction")
![Page 23
Connections
Connecting a Computer
Using a Power cord with Earth
•
In the event of failure, the earth lead may cause electric shock. Make s\
ure to
wire the earth lead in correctly, before connecting the AC power. When u\
n-
wiring the earth lead, make sure to disconnect the AC power in advance. Note
AV input devices such as DVD players, VCRs or camcorders as well as your\
computer can be connected
to the LCD Display. For detailed information on connecting AV input devi\
ces, refer to the contents
under...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-22.png "Page 23
Connections
Connecting a Computer
Using a Power cord with Earth
•
In the event of failure, the earth lead may cause electric shock. Make s\
ure to
wire the earth lead in correctly, before connecting the AC power. When u\
n-
wiring the earth lead, make sure to disconnect the AC power in advance. Note
AV input devices such as DVD players, VCRs or camcorders as well as your\
computer can be connected
to the LCD Display. For detailed information on connecting AV input devi\
ces, refer to the contents
under...")
![Page 24
Using the BNC (Analog) connector on the video card.
• Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports
on the back of your LCD Display and the 15 pin D-sub Port on the compute\
r. Connect the audio cable for your LCD Display to the audio port on the ba\
ck of
your computer.
Note
• Turn on both your computer and the LCD Display.
• The DVI cable is optional.
• Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices Using a Power cord with...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-23.png "Page 24
Using the BNC (Analog) connector on the video card.
• Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports
on the back of your LCD Display and the 15 pin D-sub Port on the compute\
r. Connect the audio cable for your LCD Display to the audio port on the ba\
ck of
your computer.
Note
• Turn on both your computer and the LCD Display.
• The DVI cable is optional.
• Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices Using a Power cord with...")
![Page 25
1.
Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUD\
IO-L] port of the
LCD Display.
2. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.\
3. Select AV using the SOURCE . Note
The LCD Display has AV connection terminals to connect AV input devices \
like DVDs, VCRs or
Camcorders. You may enjoy AV signals as long as the LCD Display is turne\
d on.
Connecting to a Camcorder 1.
Locate the AV output jacks on the camcorder. They are usually found on t\
he side or...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-24.png "Page 25
1.
Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUD\
IO-L] port of the
LCD Display.
2. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.\
3. Select AV using the SOURCE . Note
The LCD Display has AV connection terminals to connect AV input devices \
like DVDs, VCRs or
Camcorders. You may enjoy AV signals as long as the LCD Display is turne\
d on.
Connecting to a Camcorder 1.
Locate the AV output jacks on the camcorder. They are usually found on t\
he side or...")
![Page 26
1.
Connect a set of audio cables between the AV AUDIO IN [L-AUDIO-R] on the\
LCD Display
and the AUDIO OUT jacks on the DVD player.
2. Connect a Component cable between the BNC/COMPONENT IN- P
R, Y, P
B port on the LCD
Display and the P R, Y, P
B jacks on the DVD player. Note
• Select Component for the connection to a DVD player using the SOURCE but\
ton on the front of
the LCD Display or on the remote control.
• Then, start the DVD Player with a DVD disc inserted. Note
• A component cable is...](http://img.usermanuals.tech/thumb/66/98594/w64_ldm_d-25.png "Page 26
1.
Connect a set of audio cables between the AV AUDIO IN [L-AUDIO-R] on the\
LCD Display
and the AUDIO OUT jacks on the DVD player.
2. Connect a Component cable between the BNC/COMPONENT IN- P
R, Y, P
B port on the LCD
Display and the P R, Y, P
B jacks on the DVD player. Note
• Select Component for the connection to a DVD player using the SOURCE but\
ton on the front of
the LCD Display or on the remote control.
• Then, start the DVD Player with a DVD disc inserted. Note
• A component cable is...")
2. Insert the screw B into the plastic hanger. Notice • Mount the product on the wall bracket and make sure it is properly fixed\ to the left and right plastic hangers. • Be careful when installing the product on the bracket as fingers can be \ caught in the holes. • Make sure the wall bracket is securely fixed to the wall, or the product\ may not stay in place after installation. 3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear h\ oles of the product. 4. Remove safety pin (3) and insert the 4 product holders into the corres\ ponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. M\ ake sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. Introduction
A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (directio\ n of the arrow) to adjust the angle. Note You can adjust the bracket angle between -2° and 15°. Make sure to use the top center, and not the left or the right side of t\ he product to adjust the angle. Introduction
Connections Connecting a Computer Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make s\ ure to wire the earth lead in correctly, before connecting the AC power. When u\ n- wiring the earth lead, make sure to disconnect the AC power in advance. Note AV input devices such as DVD players, VCRs or camcorders as well as your\ computer can be connected to the LCD Display. For detailed information on connecting AV input devi\ ces, refer to the contents under Adjusting Your LCD Display. Connect the power cord for your LCD Display to the power port on the bac\ k of the LCD Display. Turn on the power switch. There are 2 ways to connect the D-sub to your LCD Display. Choose one of\ the following: Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, RGB port on the back of your LCD Displa\ y and the 15 pin D-sub Port on the computer. Using the DVI (Digital) connector on the video card. • Connect the DVI Cable to the DVI port on the back of your LCD Display an\ d the DVI port on the computer.
Using the BNC (Analog) connector on the video card. • Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports on the back of your LCD Display and the 15 pin D-sub Port on the compute\ r. Connect the audio cable for your LCD Display to the audio port on the ba\ ck of your computer. Note • Turn on both your computer and the LCD Display. • The DVI cable is optional. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make s\ ure to wire the earth lead in correctly, before connecting the AC power. When u\ n- wiring the earth lead, make sure to disconnect the AC power in advance. Note AV input devices such as DVD players, VCRs or camcorders as well as your\ computer can be connected to the LCD Display. For detailed information on connecting AV input devi\ ces, refer to the contents under Adjusting Your LCD Display. Connecting AV Devices Connections
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUD\ IO-L] port of the LCD Display. 2. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.\ 3. Select AV using the SOURCE . Note The LCD Display has AV connection terminals to connect AV input devices \ like DVDs, VCRs or Camcorders. You may enjoy AV signals as long as the LCD Display is turne\ d on. Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on t\ he side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks \ on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display . 2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and\ the AV IN [VIDEO] on the LCD Display . 3. Select AV for the Camcorder connection using the SOURCE button on the front of th\ e LCD Display or on the remote control. 4. Then, start the Camcorders with a tape inserted. Note The audio-video cables shown here are usually included with a Camcorder.\ (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a \ set of two cables. Connecting a DVD Player Connections
1. Connect a set of audio cables between the AV AUDIO IN [L-AUDIO-R] on the\ LCD Display and the AUDIO OUT jacks on the DVD player. 2. Connect a Component cable between the BNC/COMPONENT IN- P R, Y, P B port on the LCD Display and the P R, Y, P B jacks on the DVD player. Note • Select Component for the connection to a DVD player using the SOURCE but\ ton on the front of the LCD Display or on the remote control. • Then, start the DVD Player with a DVD disc inserted. Note • A component cable is optional. For an explanation of Component video, consult your DVD manual. Connecting a DTV Set Top Box Note • The connections for a typical Set Top Box are shown below. 1. Connect a Component cable between the BNC/COMPONENT IN- P R, Y, P B port on the LCD Display and the P R, Y, P B jacks on the Set Top Box. 2. Connect a set of audio cables between the AV AUDIO IN [L-AUDIO-R] on the\ LCD Display and the AUDIO OUT jacks on the Set Top Box. Note • Select Component for the connection to a DTV Set Top Box using the SOURC\ E button on the front of the LCD Display or on the remote control. Connections
Note • For an explanation of Component video, see your Set Top Box owners manu\ al. Connecting Using a HDMI Cable Note • Input devices such as digital DVD are connected to the HDMI terminal of \ the LCD Display using the HDMI cable. • You cannot connect a PC to the HDMI terminal. Connecting Using a DVI to HDMI Cable Note • Connect the DVI output terminal of a digital output device to the HDMI t\ erminal of the LCD Display using a DVI to HDMI cable. • Connect the red and white jacks of an RCA to stereo (for PC) cable to \ the same colored audio output terminals of the digital output device, and connect the opposite \ jack to the DVI / PC / HDMI AUDIO IN terminal of the LCD Display. Connecting to an Audio System Connections
Note • Connect a set of audio cables between the AUX L, R jacks on the AUDIO SY\ STEM and AUDIO OUT [L-AUDIO-R] on LCD Display. Connections
Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the\ CD-ROM included with this monitor. Driver installation is slightly different fr\ om one operating system to another. Follow the directions appropriate for the operating s\ ystem you have. Prepare a blank disk and download the driver program file at the Interne\ t web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic) 1. Insert CD into the CD-ROM drive. 2. Click Windows. 3. Choose your monitor model in the model list, then click the OK button.\ 4. If you can see following message window, then click the Continue Anyway\ button. Then click OK button (Microsoft ® Windows ® XP/2000 Operating System).
Note This monitor driver is under certifying MS logo, and this installation d\ oesnt damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™‚ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and Control Panel. Then, double-click on Appearance and Per\ sonalization. 3. Click Personalization and then Display Settings. 4. Click Advanced Settings.... 5. Click Properties in the Monitor tab. If the Properties button is d\ eactivated, it means the configuration for your monitor is completed. The monitor can be used as \ is. If the message Windows needs... is displayed, as shown in the figure b\ elow, click Continue. Using the Software