Samsung SyncMaster 320MP-2 LCD Monitor User Manual

MENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the O\
SD menu
or return to the previous menu.
Navigate buttons (Up-Down buttons)
Moves from one menu item to another vertically or adjusts selected menu \
values.
Adjust buttons (Left-Right buttons) / Volume buttons
Moves from one menu item to another horizontally or adjusts selected men\
u val-
ues. When OSD is not on the screen, push the button to adjust volume.
ENTER button [ENTER]
Activates a highlighted menu...

 POWER S/W ON [ │ ] / OFF [O]
Switches the LCD Display On/Off.  POWER IN
The power cord plugs into the LCD Display and
the wall plug.  
 RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port  DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO
IN] (PC/DVI/HDMI Audio Connection Terminal
(Input))  DVI / PC / HDMI IN [HDMI]
Connect the HDMI terminal at the back of your
LCD Display to the HDMI terminal of your dig-
ital output device using a HDMI cable.  DVI / PC / HDMI IN [RGB](PC Video Con-...

 
 
 DC OUT [5V/1.5A]
Connect this to the  POWER connector of a TV
tuner box or network box.
Make sure to use connecting DC-OUT terminal
to the authorized TV-Tuner Box[SBB-DT*].  Otherwise, this may result in damage to the prod-
uct.
 AV IN [VIDEO] (VIDEO Connection Termi-
nal)
Connect the [ VIDEO ] terminal of your monitor
to the video output terminal of the external device
using a VIDEO cable.  AV AUDIO IN [L-AUDIO-R](LCD Display
Audio Connection Terminal (Input))  AV AUDIO OUT [L-AUDIO-R] (LCD Dis-...

Kensington Lock
The Kensington Lock is a device used to physi-
cally fix the system when using it in a public
place. The locking device has to be purchased
separately. The appearance and locking method
may differ from the illustration depending on the
manufacturer. Refer to the manual provided with
the Kensington Lock for proper use. The locking
device has to be purchased separately.
 Note
The location of the Kensington Lock may be dif-
ferent depending on its model.
Using the Anti-Theft Kensington Lock...

 POWER
OFF
Number Buttons
DEL   button
+ VOL -
 MUTE
TV/DTV
 MENU
 INFO
COLOR BUTTONS
 TTX/MIX
STILL
AUTO
S.MODE
MDC
LOCK
 SOURCE
 ENTER/PRE-CH
 CH/P 
D.MENU
GUIDE
 RETURN
Up-Down Left-Right buttons
 EXIT
 SRS
MagicInfo
P.MODE
 DUAL/MTS
PIP
SWAP
1.   POWER
Turns the product On.
2.   Off
Turns the product Off.
3. Number Buttons Press to change the channel.Introduction 

4. DEL   button
The - button operates only for DTV. It is used to select MMS
(multi-channel) for a DTV.
5. + VOL - Adjusts the audio volume.
6.  MUTE
Pauses (mutes) the audio output temporarily. This is displayed on
the lower left corner of the screen. The audio resumes if MUTE
or - VOL + is pressed in the Mute mode.
7. TV/DTV Selects the TV and DTV mode directly.
8.  MENU
Opens the on-screen menu and exits from the menu or closes the
adjustment menu.
9. Activates a highlighted menu item.
10.  INFO...

24. Up-Down Left-Right but-
tons
Moves from one menu item to another horizontally, vertically or
adjusts selected menu values.
25.  EXIT
Exits from the menu screen.
26.  SRS
Selects SRS TruSurround XT mode.
27.MagicInfo MagicInfo Quick Launch Button.
28. P.MODE When you press this button, current picture mode is displayed on
the lower center of the screen.
AV
 / HDMI
 / TV
 : P.MODE
The LCD Display has four automatic picture settings that are pre-
set at the factory. Then push button again to circle...

Installation VESA Bracket
• When installing VESA, make sure to comply with the international VESA st\
andards.
•Purchasing VESA Bracket and Installation Information : Please contact yo\
ur nearest SAMSUNG
Distributor to place an order. After your order is placed, installation \
professionals will visit you
and install the bracket.
• At least 2 persons are needed in order to move the LCD Display.
• SAMSUNG is not responsible for any product damage or any injury caused b\
y installation at
customers...

Wall Bracket Installation
• Contact a technician for installing the wall bracket.
•SAMSUNG Electronics is not responsible for any damages to the product or\
 harm to customers
when the installation is done by the customer.
• This product is for installing on cement walls. The product may not stay\
 in place when installed
on plaster or wood.
Components Only use the components and accessories shipped with the product. Wall Bracket(1)
Hinge(Left 1, Right
1)Plastic
Hanger
(4)Screw
(A)(11)
Screw(B)...

2.
Before drilling into the wall, check if the length between the two locki\
ng holes at the back of the
product is correct.
If the length is too short or long, loosen all or some of the 4screws on\
 the wall bracket to adjust
the length. A -
Length between the two locking holes
3. Check the installation diagram and mark the drill points on the wall. Us\
e the 5.0 mm bit to drill
holes deeper than 35 mm. Fix each anchor in the corresponding hole. Matc\
h each of the brackets
and hinge holes to the...