Samsung Syncmaster 2243sw User Manual

							 Note
The  language 
chosen 
affects only the language of the OSD. It has no effect on any software
running on the computer.
MENU →   ,   →   →   →   ,   → MENU
H-Position You can change the horizontal position where the OSD menu appears on your monitor.
MENU → 
 ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor
80
Downloaded from ManualMonitor.com Manual± 
						

							V-Position
You can change the vertical position where the OSD menu appears on your monitor.
MENU → 
 ,   →   →   ,   →   →   ,   → MENU
Transparency Change the transparency of the background of the OSD.
• Off •On
MENU →   ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor
81Downloaded from ManualMonitor.com Manual± 
						

							Display Time
The menu will be automatically turned off if no adjustments are made for a certain time period.
You can set the amount of time the menu will wait before it is turned off.
• 5 sec •10 sec •20 sec •200 sec
MENU →   ,   →   →   ,   →   →   ,   → MENU
 Setup
Reset Adjusting the Monitor
82Downloaded from ManualMonitor.com Manual± 
						

							Reverts the product settings to factory defaults.
• No •Yes
MENU →   ,   →   →   →   ,   → MENU
Customized Key You can specify a function which will be activated when the 
Customized Key  ( ) is pressed.
MENU →   ,   →   →   ,   →  →   ,   →MENU
Off Timer Adjusting the Monitor
83
Downloaded from ManualMonitor.com Manual± 
						

							The monitors will turn off automatically at the specified time.
• Off •On
MENU →   ,   →   →   ,   →  →   ,   →   →  ,   → MENU
Auto Source Select Auto Source for the monitor to automatically select the signal source.
• Auto •Manual
MENU →   ,   →   →   ,   →  →   ,   →MENU
Adjusting the Monitor
84Downloaded from ManualMonitor.com Manual± 
						

							Image Size
You can change the size of the screen displayed on your monitor.
• Auto •Wide
• Auto  -  The  screen  is  displayed  in  accordance  with  the  screen  aspect  ratio  of  the  input
signals.
• Wide  
- A full screen is displayed regardless of the screen aspect ratio of the input signals.  Note
• Signals not available in the standard mode table are not supported.
• If 

the wide screen which is the optimal resolution for the monitor is set on your PC, this
function is not performed.
MENU →   ,   →   →   ,   →  →  ,   → MENU
Adjusting the Monitor
85
Downloaded from ManualMonitor.com Manual± 
						

							 Information
Shows a video source, display mode on the OSD screen.
MENU → 
 ,   →MENU
{2243SW/2243SWX} Direct Functions
AUTO When  the  'AUTO'  button  is  pressed,  the  auto  adjustment  screen  appears  as  shown  in  the
animated screen on the center. Adjusting the Monitor
86Downloaded from ManualMonitor.com Manual± 
						

							Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values
of Fine, Coarse and Position are adjusted automatically.
(Available in 
Analog mode only) If  auto  adjustment  does  not  work  properly,  press  'AUTO'  button  again  to  adjust  picture
with more accuracy. If you change resolution in the control panel, auto function will be executed automatically.
OSD Lock & Unlock When pressing the AUTO button after locking the OSD When pressing the MENU button after locking the OSD Adjusting the Monitor
87Downloaded from ManualMonitor.com Manual± 
						

							This is the function that locks the OSD in order to keep the current states of settings or prevent
others from adjusting the current settings.
Lock : 
Hold 
down the MENU button for more than five (5) seconds to activate the OSD ad-
justment lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD
adjustment lock function.  Note
Though the OSD 
 adjustment lock function is activated, you can still adjust the brightness and
contrast, and adjust Customized Key ( ) using the Direct button.
Adjusting the Monitor
88
Downloaded from ManualMonitor.com Manual± 
						

							Customized key
You can customize key assignment for the Custom button according to your preferences.
To view 
the 
operating screen displayed when pressing the [   ] button after configuring the
customized key for a function, click the name of each function.
( Image Size - MagicBright - MagicColor - Color Effect)  Note
You can configure the customized key for a required function via  Setup > Customized Key.
Adjusting the Monitor
89
Downloaded from ManualMonitor.com Manual±