Samsung Syncmaster 2243sw User Manual

							Changes the clearance of image.
( Not available in 
MagicColor mode of Full and Intelligent. )
MENU →   ,   →   →   ,   →   →   ,   → MENU
H-Position Changes the horizontal position of the monitor's entire display.
(Available in 
Analog mode only)
MENU →   ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor
100Downloaded from ManualMonitor.com Manual± 
						

							V-Position
Changes the vertical position of the monitor's entire display.
(Available in 
Analog mode only)
MENU →   ,   →   →   ,   →   →   ,   → MENU
 OSD
Language You can choose one of nine languages. Adjusting the Monitor
101Downloaded from ManualMonitor.com Manual± 
						

							 Note
The  language 
chosen 
affects only the language of the OSD. It has no effect on any software
running on the computer.
MENU →   ,   →   →   →   ,   → MENU
H-Position You can change the horizontal position where the OSD menu appears on your monitor.
MENU → 
 ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor
102
Downloaded from ManualMonitor.com Manual± 
						

							V-Position
You can change the vertical position where the OSD menu appears on your monitor.
MENU → 
 ,   →   →   ,   →   →   ,   → MENU
Transparency Change the transparency of the background of the OSD.
• Off •On
MENU →   ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor
103Downloaded from ManualMonitor.com Manual± 
						

							Display Time
The menu will be automatically turned off if no adjustments are made for a certain time period.
You can set the amount of time the menu will wait before it is turned off.
• 5 sec •10 sec •20 sec •200 sec
MENU →   ,   →   →   ,   →   →   ,   → MENU
 Setup
Reset Adjusting the Monitor
104Downloaded from ManualMonitor.com Manual± 
						

							Reverts the product settings to factory defaults.
• No •Yes
MENU →   ,   →   →   →   ,   → MENU
Customized Key You can specify a function which will be activated when the 
Customized Key  ( ) is pressed.
MENU →   ,   →   →   ,   →  →   ,   →MENU
Off Timer Adjusting the Monitor
105
Downloaded from ManualMonitor.com Manual± 
						

							The monitors will turn off automatically at the specified time.
• Off •On
MENU →   ,   →   →   ,   →  →   ,   →   →  ,   → MENU
Auto Source Select Auto Source for the monitor to automatically select the signal source.
• Auto •Manual
MENU →   ,   →   →   ,   →  →   ,   →MENU
Adjusting the Monitor
106Downloaded from ManualMonitor.com Manual± 
						

							Image Size
You can change the size of the screen displayed on your monitor.
• Auto •Wide
• Auto  -  The  screen  is  displayed  in  accordance  with  the  screen  aspect  ratio  of  the  input
signals.
• Wide  
- A full screen is displayed regardless of the screen aspect ratio of the input signals.  Note
• Signals not available in the standard mode table are not supported.
• If 

the wide screen which is the optimal resolution for the monitor is set on your PC, this
function is not performed.
MENU →   ,   →   →   ,   →  →  ,   → MENU
Adjusting the Monitor
107
Downloaded from ManualMonitor.com Manual± 
						

							 Information
Shows a video source, display mode on the OSD screen.
MENU → 
 ,   →MENU
Adjusting the Monitor
108Downloaded from ManualMonitor.com Manual± 
						

							Troubleshooting
{943SW/943SWX} Self-Test Feature Check
 Note
Your  monitor  provides 
a  self  test  feature  that  allows  you  to  check  whether  your  monitor  is
functioning properly.
Self-Test Feature Check 1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.If the monitor is functioning properly, you will see a box in the illustration below. This box appears during normal operation if the video cable becomes disconnected or
damaged.
4. Turn off  your 

monitor and reconnect the video cable; then turn on both your computer
and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; 
your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, a message appears on the screen or the
screen goes blank although the power indicator LED is still on. The message may indicate
that the monitor is out of scan range or that you need to check the signal cable. Environment
The location  and 

the position of the monitor may influence the quality and other features of
the monitor.
If  there  are  any  sub  woofer  speakers  near  the  monitor,  unplug  and  relocate  the  woofer  to
another room.
Remove all electronic devices such as radios, fans, clocks and telephones that are within 3
feet (one meter) of the monitor. 109
Downloaded from ManualMonitor.com Manual±