Samsung Rugby 4 Instruction Manual

							87CompassTools
Compass
Use the Compass application as 
you would any compass.
The red end of the compass needle indicates 
magnetic north and the direction that the cover of 
the phone is facing is indicated below the diall.
To use the compass:
1. From a Home screen, press Menu > Tools > 
Compass.
2.  Hold the phone display parallel to the ground 
and turn slowly the phone until it points to the 
direction you want. The degree of the direction 
from magnetic north appears on the screen 
below the dial.
3. Press Options for calibration.
4. Press Calibration to calibrate the compass. 
Calibrate the compass by waving the device in a 
figure 8 motion, as shown on the display screen.  
						

							88TasksTools
The Tasks option allows you to 
create a “to do” or task list.
To create a Task and add it to the task list:
1. From a Home screen, press Menu > Tools > 
Tasks.
2.  If there are no tasks yet, press Create. If 
there are tasks listed, then press Options > 
Create task. The following fields appear:
 -Subject: Subject or title for this task (up to 
100 characters) .
 -Start date: Date for this task to begin.
 -Due date: Date for this task to end.
 -Priority: Assign the task a priority (High, 
Normal, or Low) .
 -Alarm: Set an alarm for this event. Press 
Change to change the status to either On or 
Off. When enabled (On) , the Alarm time and 
date field appears. 
 -Alarm time and date: Set the time and date 
you want the alarm to sound. Only appears if 
Alarm is set to On.
 -Details: Detailed description for this task (up 
to 100 characters) .
3. Press Save to save this new task entry.
Ta s k s  
						

							89MemoTools
Use the Memo tool to create 
notes to remember.
To use the Memo tool:
1. From a Home screen, press Menu > Tools > 
Memo.
If there are no tasks yet, press Create. If 
there are tasks listed, then press Options > 
Create memo.
2.  Type a memo and press Save to save it.
3. Press Options to display the following options, if 
any Memos exist:
 -Create memo: Create a memo.
 -Send: Send the memo via a multimedia 
message or via Bluetooth.
 -Delete: Delete the highlighted memo.
 -Delete multiple: Select one or more memos to 
delete.
Memo  
						

							90CalculatorTools
The Calculator provides basic 
arithmetic functions.
This tool lets you use the phone as a calculator. The 
calculator provides the basic arithmetic functions: 
addition, subtraction, multiplication, and division.
1. From a Home screen, press Menu > Tools > 
Calculator.
2.  Use the numeric keys to enter the first number.
3. Enter the operation for your calculation by 
pressing the Navigation keys as illustrated on the 
display.
4. Use the numeric keys to enter the second 
number.
5. To view the result, press the  Centre key.
The keys are assigned as follows:
• Navigation keys: Arithmetic operators
• Centre navigation key : Enter/Calculate
• Star key : Decimal
• Pound key : Parentheses
• Volume keys: Move the cursor across an equation
Calculator  
						

							91Tip CalculatorTools
Use the Tip Calculator to 
calculate the amount of money 
to leave as a tip based on 
parameters such as total bill 
amount, tip percentage, and 
number of members in your 
group.
1. From a Home screen, press Menu > Tools 
> Tip Calculator and press Select or the 
 Centre key.
2.  Enter the values into the appropriate fields by 
using the numeric keys:
 -Bill: The total amount of the bill.
Note: Press  for a decimal point.
 -Tip (%): The percent that you want to use for 
the tip. Use the  Clear key to clear the field 
and enter another amount. 
 -Tip ($): The amount of the tip based on the 
figures entered.
 -# of ppl: The number of people splitting the 
bill.
 -You pay: This is your share of the total check 
amount. This value is based on the figure 
entered in the # of ppl field and assumes that 
the total bill and tip are shared equally.
3. Press Reset to clear all fields and reset to 
default values.
Tip Calculator  
						

							92Converter
Tools
The Converter menu provides 
the following conversion 
categories: Currency, Length, 
Weight, Volume, Area, and 
Temperature.
To use the Converter:
1. From a Home screen, press Menu > Tools > 
Converter.
2. Highlight a Converter function, and press Select 
or the 
 Centre key.
Each converter function has a field for the type 
of unit to convert (the first Unit field) and a field 
for the type of unit to convert to (the second Unit 
field) . An additional field allows you to input the 
unit amount to convert.
3. Enter an amount in either Unit field, depending 
on your needs.
 The unit of conversion displays in the appropriate 
field. In the case where conversions are not 
direct, decimal figures display for greater 
accuracy.
To change rate settings for Currency:
1. From a Home screen, press Menu > Tools > 
Converter  > Currency.
2. Press Options  > Rate settings  > Options. 
3. To add a rate, press Add rate, enter the new Unit 
and Rate and press Save .
4. To delete a rate, press Delete rate .
Converter  
						

							93World ClockTools
World Clock allows you to view 
the time around the world. It 
displays time in 30 cities and 
areas, within all 24 time zones, 
around the world.
To add a new time zone to the World Clock main 
screen:
1. From a Home screen, press Menu > Tools > 
World Clock.
An entry for your time zone displays major cities  
or areas in your time zone, time, and date.
2.  Press Add to add another time zone to your list.
3. Use the Left or Right Navigation key to highlight 
the time zone you want to add. Cities or areas 
in each time zone are displayed as you navigate 
through the various time zones.
4. Press Add to add the time zone you want.
The new time zone is displayed on the World 
Clock main screen.
5. Press Options on a highlighted time zone for the 
following options:
 -Set as home zone: Set the highlighted time 
zone as your home zone.
 -Daylight saving on/off: Turn Daylight Saving 
on or off.
 -Delete: Remove the time zone.
World Clock  
						

							94TimerTools
Use the Timer to set a 
countdown timer.
To enable the Timer, use the following options:
1. From a Home screen, press Menu > Tools > 
Timer.
2.  Begin by setting the length of time. Use the Left 
or Right Navigation key to highlight the hour, 
minutes, and seconds. Use the keypad to enter 
the values.
3. Press Start to start the timer.
4. Press Pause to pause the timer.
5. Press Reset to reset the timer.
Timer  
						

							95StopwatchTools
Use the Stopwatch to measure 
split and lap times. Up to fifty 
separate times can be recorded.
1. From a Home screen, press Menu > Tools > 
Stopwatch.
2.  Use the Right and Left Navigation keys to select 
either Split or Lap modes.
Note: Split times are measured from the clock’s start 
time. Lap times restart the measurement every time a 
lap is recorded.
3. Press Start to start the stopwatch.
4. Press Split or Lap to record a split or lap time 
(the option available depends on the mode) .
5. Press Stop to stop the clock.
6. Press Restart to resume from the stopped time.
7. Press Reset to erase all times recorded.
Stopwatch  
						

							This safety information 
contains content for mobile 
devices. Some content may 
be not applicable to your 
device. To prevent injury 
to yourself and others or 
damage to your device, read 
the safety information about 
your device before using the 
device.
Safety Information