Samsung Ln T4671F Tft Lcd Television Owners Instructions

							
English - 1
VCR
brandCode
SAMSUNG000  001  002  003  004  005  077  078  079
ADMIRAL020
AIWA025
AKAI004  027  032
AUDIO DYNAMICS007  026
BELL&HOWELL018
BROKSONIC022
CANDLE002  003  006   008  015  055
CANON021  056
CITIZEN002  003  006  008  015  055
COLORTYME007
CRAIG002  024
CURTIS MATHES002  007  008  017  021  025  056  064  066
DAEWOO003  010  011  012  013  014  015  016
DB007  026
DIMENSIA017
DYNATECH025
ELECTROHOME034
EMERSON001  003  006  021  022  025  030  032  034  040  047  050  052  060  063  065  066  067  069  073
FISHER018  024  028  029  048  051  061
FUNAI025
GENERAL ELECTRIC002  005  017  021  056
GO VIDEO002
HARMAN KARDON007
HITACHI019  025  041  042  074
INSTANT REPLAY021
JC PENNEY002  007  018  019  021  026  037  041  054  056
JCL007  008  018  021  026  037
JVC081  082  083
KENWOOD007 008 018 021 026 037
KLH070
KONIA036
LG(Goldstar)006  007  008  009  010
LIOYD025
LOGIK038
LXI025
MAGNAVOX021  056  059
MARANTZ007  008  018  021  026  037  062
MARTA006
MEI021
MEMOREX006  021  024  025
MGA034
MIDLAND005
MINOLTA019  041  075
MITSUBISHI019  034  041  046
brandCode
MONTGOMERY WARD020
MTC002  025
MULTITECH002  005  025  038
NEC007  008  018  026  037  062  064
OPTIMUS020
ORION073  074  075  076
PANASONIC021  056  071  072
PENTAX019  041  075
PENTEX RESEARCH+008
PHILCO021  056  059
PHILIPS021  080
PIONEER019  026  039  053
PORTLAND015  049  055
PROSCAN017
QUARTZ018
QUASAR021  056
RADIO SHACK/REALISTIC006  018  020  021  024  025  029  034  048  056
RCA002  017  019  021  035  041  043  057  068  076
SANSUI026
SANYO018  024
SCOTT003  047  052  067
SEARS006  018  019  024  028  029  041  048  051
SHARP020  034  045  015
SHIMTOM027  033  038  058
SIGNATURE025
SONY027  033  044
SYLVANIA021  025  056  059
SYMPHONIC025
TANDY018  025
TASHIKA006
TATUNG037
TEAC025  037  068
TECHNICS021
TEKNIKA006  021  025  031
TMK066
TOSHIBA003  019  029  051  052
TOTEVISION002  006
UNITECH002
VECTOR RESEARCH007  026
VICTOR026
VIDEO CONCEPTS007  026
VIDEOSONIC002
WARDS002  003  006  019  020  021  024  025  034  038  041
YAMAHA007  008  018  026  037
ZENITH023  027  033
Remote Control Codes

BN68-01310A-00Eng_0709.indd   192007-07-20   �� 3:25:48 
						

							
English - 20
CAbLE bOx
brandCode
SAMSUNG000  001  002  003  004  005  006  007
GI041
HAMLIN003  024  031
HITACHI025  030
JERROLD038  039
MACOM025  030
MAGNAVOX019  023  028
OAK026
PANASONIC003  022  027  037  044
PHILIPS019  021  023  028
PIONEER004  018  020  044
RCA014  022  040
REGAL003
brandCode
REGENCY015  023
SA042  043
SCIENTIFIC ATLAN042  043
SPRUCER022
STARGATE 2000036
SYLVANIA016
TEXSCAN016
TOCOM032
UNIVERSAL033  034
VIEWSTAR019  021  023  028
WARNER AMEX046
ZENITH017  029  035  037  045
SAMSUNG DVD
ProductCode
DVD000  001  002
DVDR003  004
BD Record005  006
VCR COMBO007  008  009  010  011
VCR Record012
DHR COMBO013
ProductCode
Home Theater VCR COMBO014  015  016
HDD Recorder COMBO017
TWIN TRAY COMBO018
STB DVD COMBO019
DVD Receiver020
AV Receiver021
DVD
brandCode
ANAM030
AUDIOVOX075
AUDIOLOGIC085
ANABA072
APEX DIGITAL070  071  074  086  083  084  088  111  112
AIWA114
BROKSONIC062
BLAUPUNKT074
B&K122  123
CURTIS MATHES027
CYBER HOME077  078  079  082
CLARION080  125
CIRRUS081
CYBER HOME065
CINEVISION095
DAEWOO066
DENON146
FARENHEIT067  068
FISHER090
GPX060
GO VIDEO061  089  133  135
GE069  074
GREENHILL074
HITACHI064  113
HITEKER071
HOYO073
HARMAN / KARDON091  110
IRT089
brandCode
INTEGRA092
JBL091
JVC022  033  115  116
JATON073
KENWOOD051  108  109
KISS073
KONKA059  100  106  107
KLH074  075
LG(Goldstar)025  031
LOEWE057
LASONIC058 
MOBILE AUTHORITY054
MEMOREX055
MALATA056
MAGNAVOX076  093
MINTEK074  094
MONYKA073
NORCENT048  049  050
NEXT BASE052
NEC053
NANTAUS144
NESA074
OPTOMEDIA ELECTRONICS105
OPTIVIEW072
ONKYO076  092  119
PHILCO044  045
PRINCETON046  047
PROSCAN023

BN68-01310A-00Eng_0709.indd   202007-07-20   �� 3:25:49 
						

							
English - 21
DVD
brandCode
PANASONIC024  034  124  134  136  137  138
PHILIPS036  076
ROTEL117  118
RIO120
RCA023  035  074  075  131  132
RAITE073
ROWA038
SAMPO104
SONY026  029  126  127  128  129  130  141
SHERWOOD039  041
SVA042
SYLVANIA043  093
SHARP140
SANSUI062
SANYO062  090
SHINSONIC094
brandCode
THOMSON145
TOSHIBA028  062  076
TECHNICS139
TVIEW072
TOKAI073
TEAC096
TECHWOOD097
TREDEX098  099  101
URBAN CONCEPTS076
VENTURER075
VOCOPRO102
YAMAHA032  063
YAMAKAWA040  073
XWAVE103
ZENITH076  121
SAMSUNG SET-TOP bOx
SET-TOP bOx
brandCode
ALPHASTAR023
ANAM043
CHANNEL MASTER018  034
CROSSDIGITAL019
CHAPARRAL035
DIRECT TV015  016  017  019  022  045  060  061  062  065  066  067  068
DAEWOO074
DISH NETWORK SYSTEM069  070
DISHPRO069
DRAKE018  024  032
DX ANTENNA027
ECHOSTAR025  069  070  071
EXPRESSVU069
GOI069
GE065
GENERAL INSTRUMENT046  047  048  063  064
HTS069
HOME CABLE056
HITACHI022
HUGHES NETWORK015  017
IQ020
IQ PRISM020
JANEIL059
JERROID063
JVC069  070
LG(Goldstar)044  073
brandCode
MAGNAVOX016  021  036  038  039  040  041  042
MEMOREX016
MOTOROLA064
MACOM018
MITSUBISHI015
NEXT LEVEL047  048  064
PHILIPS015  016  017  021  033  036  038  039  040  041  042  067
PRIMESTAR046  049  050  063
PANASONIC058  059  061  062
PAYSAT016
PROSCAN065  066
RCA051  052  053  065  066
RADIOSHACK064
REALISTIC057
STAR TRAK026
STS020  027
SKY031
SKY LIFE005  006  007
SHACK064
STAR CHOICE064
SONY054  060
TOSHIBA015  017  028  029  030  072
ULTIMATE TV060  066
UNIDEN016  021  037  055  056  057
ZENITH024  031  068
ProductCode
Ground  wave STB000  001  002  008   01
CABLE STB000  004  008  01
Satellite STB000  003  008  01

BN68-01310A-00Eng_0709.indd   212007-07-20   �� 3:25:49 
						

							
English - 22
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source  of your choice.
1.	Press the MENU button to display the menu. 
    Press  the▲ or ▼ button to select “Input”, then press the ENTER button.
2. Press the ENTER button to select "Source List". 
    Press the ▲ or ▼ button to select signal source, then press the ENTER button.
    You can choose between the following sets of jacks: AV1, S-Video1, Component1, Component2, PC, HDMI1, or HDMI2 on the TV’s rear panel and AV2, S-Video2, or HDMI3 on the TV’s side panel.
   HDMI1, HDMI2, HDMI3 input can only be selected when the external device is   
      turned on and connected via HDMI.     You can choose only those external devices that are connected to the TV.
 Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source s\
election easier.
1.	Press the MENU button to display the menu. 
    Press  the▲ or ▼ button to select “Input”, then press the ENTER button. 
    Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.
2. Press the ▲ or ▼ button to select "AV1", "AV2", "S-Video1", "S-Video2",     
    "Component1", "Component2", "PC", "HDMI1", "HDMI2", "HDMI3" input jack, then   
    press the 
ENTER button.
3. Press the ▲ or ▼ button to select "VCR", "DVD", "D-VHS", "Cable STB",  
    "HD STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver",     
    "Game", "Camcorder", "DVD Combo", "PC", "VOD STB", "TV" input source, then   
    press the 
ENTER button. 
    Press the  ExIT button to exit.
    When a PC with a resolution of 1920 x 1080@60Hz is connected to the  HDMI IN 1 port, you should set the" HDMI1" mode to "PC" in the "Edit Name" of the "Input" mode. If the "HDMI1" mode is not PC, it works depending on the TV  setting.
InputSource List  : TV   ►
Edit Name       ►
WISELINK       
Anynet+ (HDMI-CEC) 
TV
Move    Enter Return
Source ListTV
Move   Enter Return
TV
AV1 : ----
AV2 : ----
S-Video1 : ----
S-Video2 : ----
Component1 : ----
Component2 : ----▼More
InputSource List  : TV   ►
Edit Name       ►
WISELINK       
Anynet+ (HDMI-CEC) 
TV
Move    Enter Return
Edit NameTV
Move   Enter Return
AV1 
: ----
AV2 : ----
S-Video1 : ----
S-Video2 : ----
Component1 : ----
Component2  : ----
▼More        
Edit NameTV
 Move   Enter Return
AV1 
: ----
AV2 : ----
S-Video1 : ----
S-Video2 : ----
Component1 : ----
Component2  : ----
▼More        
----VCRDVDD-VHS
Cable STb
HD STb
Satellite STb
PVR STb
▼

BN68-01310A-00Eng_0709.indd   222007-07-20   �� 3:25:49 
						

							
English - 2
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory.   You can activate either Dynamic, Standard, Movie by making a selection fr\
om the menu. 
1.	Press the MENU button to display the menu. 
    Press the ENTER button, to select “Picture”.
2.	Press the ENTER button to select "Mode". 
    Press the ▲ or ▼ button to select the "Dynamic", "Standard", "Movie" picture  
    setting. Press the ENTER button.
 Choose Dynamic to increase the clarity and sharpness of the picture. Choose Standard for the standard factory settings. Choose Movie for a natural Image without picture enhancements.
3.	 	Press the ▲ or ▼ button to select "Contrast", "Brightness", "Sharpness",     "Color", "Tint(G/R)" or "Backlight", then press the ENTER button.
4.	Press the ◄ or ► button to decrease or increase the value of a particular item.  
    For example, if you select "Contrast", pressing the ► button increases it. 
    Press the ENTER button.
    Press the  ExIT 
button to exit.
     When you make changes to "Contrast", "Brightness", "Sharpness",     "Color", "Tint(G/R)" or "Backlight", the OSD will be adjusted accordingly.    When in PC mode, Tint, Sharpness and Color are not available.
    Each adjusted setting will be stored separately according to its input mode.
 Press the P.MODE button on the remote control repeatedly to select the desired   
    picture mode.
Picture Control
Move    Enter Return
Mode 
: Dynamic    
►
Contrast     100
brightness      4
Sharpness      7
Color      
Tint   G 0       R 0
backlight   
  10▼More 
PictureTV
Move    Enter Return
Mode  : DynamicContrast     100
brightness      4
Sharpness      7
Color      
Tint   G 0       R 0
backlight   
  10▼More 
PictureTV
Move    Enter Return
Mode 
: Dynamic    
►
Contrast     100
brightness      4
Sharpness      7
Color      
Tint   G 0       R 0
backlight   
  10▼More 
PictureTV
DynamicStandardMovie
100▲Contrast▼Move Adjust Return

BN68-01310A-00Eng_0709.indd   232007-07-20   �� 3:25:50 
						

							
English - 24
Adjusting the Color Tone
You can change the color of the entire screen according to your preferenc\
e.
1.	Press the MENU button to display the menu. 
    Press the ENTER button to select “Picture”.
2.	Press the ▲ or ▼ button to select "Color Tone", then press the ENTER button.
3.	 Press the ▲ or ▼ button to select "Cool2", "Cool1", "Normal", "Warm1"   
    or "Warm2".  
    Press the ENTER button.
    When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be selected. "Movie" mode is only available.
    Each adjusted setting will be stored separately according to its input mode.
Move    Enter Return
▲More
Color Tone  : Cool1 ►
Detailed Settings    ►
Size  : 16 :  
►
Digital NR  : Auto ►
Active Color  : On ► 
DNle : On ► ▼More
PictureTV
Move    Enter Return
▲More
Color Tone  : Cool2
Detailed Settings   
Size  : 16 : 
Digital NR  : Low
Active Color  : On 
DNle 
: On ▼More
PictureTV
Cool2Cool1NormalWarm1Warm2
Resetting the Picture Settings to the Factory Defaults
1.	 	Press the MENU button to display the menu.  Press the ENTER button to select “Picture”.
2.   Press the ▲ or ▼ button to select "Reset", then press the ENTER button.  Press the ▲ or ▼ button to select “Cancel” or “OK” then press the ENTER button.
    Press the  ExIT 
button to exit.
   Each mode can be reset.Move    Enter Return
▲More
Auto Motion Plus 120Hz  : Low
Reset : OK ►
PictureTV
OKCancel

BN68-01310A-00Eng_0709.indd   242007-07-20   �� 3:25:51 
						

							
English - 2
Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings.
Activating Detailed Settings
1.	Press the MENU button to display the menu. 
    Press the ENTER button to select “Picture”. 
2.	Press the ENTER button to select “Mode” 
      Press the ▲ or ▼ button to select "Standard" or "Movie", then press the ENTER button.
3.	Press the ▲ or ▼ button to select “Detailed Settings”, then press the  
    ENTER button.    "Detailed Settings" is available in "Standard" or "Movie" mode.     If "DNIe" is Off, the "Detailed Settings" cannot be selected when the Picture mode is in "Standard" mode.
Activating black adjust
You can select the black level on the screen to adjust the screen depth.
4.	Press the ▲ or ▼ button to select “Black adjust”, then press the ENTER button.
5.	Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High”.  
    Press the ENTER button.
 Off: Turns off the black adjustment function.  Low: Sets the black color depth to low.  Medium: Sets the black color depth to medium.  High: Sets the black color depth to high. 
Activating Dynamic Contrast
You can adjust the screen contrast so that the optimal contrast is provided.
6.	Press the ▲ or ▼ button to select “Dynamic Contrast”, then press the     ENTER button.
7.	Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High”.  
    Press the ENTER button.
 Off: Turns off the dynamic contrast adjustment function.   Low: Sets the dynamic contrast to low.   Medium: Sets the dynamic contrast to medium.  High: Sets the dynamic contrast to high. 
Adjusting the Detailed Settings
Move    Enter Return
black Adjust 
: Off 
►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
Move   Enter Return
Mode 
: Movie    
►
Contrast       0
brightness      4
Sharpness      20
Color      
Tint   G 0       R 0
backlight   
   ▼More 
PictureTV
Move    Enter Return
black Adjust 
: Off
Dynamic Contrast  : Off
Gamma 
: 0Color Space   : Auto 
White balance   
My Color Control   
Edge Enhancement  : Off
 xVYCC : Off
Detailed SettingsTVOffLowMediumHigh
Move   Enter Return
black Adjust 
: Off 
►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
Move   Enter Return
black Adjust 
: Off
Dynamic Contrast  : Off
Gamma  : 0 
Color Space  : Auto 
White balance   
My Color Control   
Edge Enhancement  : Off
 xVYCC : Off 
Detailed SettingsTV
OffLowMediumHigh
Move   Enter Return
▲More
Color Tone  : Warm2 ►
Detailed Settings   ►
Size  : 16 :  ►
Digital NR  : Auto ►
Active Color  : Off ►
DNle  : Off ►▼More
PictureTV

BN68-01310A-00Eng_0709.indd   252007-07-20   �� 3:25:51 
						

							
English - 26
Move   Enter Return
R-Offset 
 1
G-Offset   1
b-Offset   1
R-Gain   1
G-Gain   1
b-Gain   1
Reset   
 
White balanceTV
Activating Gamma
You can adjust the Primary Color (Red, Green Blue) Intensity. (-3 ~ +3)
8.	Press the ▲ or ▼ button to select “Gamma”, then press the ENTER button.
9.	Press the ◄ or ► button to decrease or increase the value of a particular item. 
    Press the ENTER button.
Changing the Color Space
Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most natural color.
10.	Press the ▲ or ▼ button to select “Color Space”, then press the ENTER button.
11.	Press the ▲ or ▼ button to select “Auto” or “Wide”.  
    Press the ENTER button.
 Auto :  Auto Color Space automatically adjusts to the most natural color tone ba\
sed on                 program sources. Wide : Wide Color Space offers deep and rich color tone.
Activating White balance
You can adjust the color temperature for more natural picture colors.
12.	Press the ▲ or ▼ button to select “White Balance”, then press the ENTER  
    button.
13.	Select the required option by pressing the ▲ or ▼ button, then press the     ENTER button. 
14.	Press the ◄ or ► button to decrease or increase the value of a particular item. 
    Press the ENTER button.
 R-Offset: Adjusts the red color darkness.  G-Offset: Adjusts the green color darkness.  b-Offset: Adjusts the blue color darkness.  R-Gain: Adjusts the red color brightness.  G-Gain: Adjusts the green color brightness.  b-Gain: Adjusts the blue color brightness.  Reset: The previously adjusted white balance will be reset to the factory defau\
lts.
  Changing the adjustment value will refresh the adjusted screen.
Move    Enter Return
black Adjust 
: Off 
►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
Move   Enter Return
black Adjust 
: Off 
►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
Move   Enter Return
black Adjust 
: Off 
Dynamic Contrast  : Off 
Gamma  : 0 
Color Space  : Auto 
White balance   
My Color Control   
Edge Enhancement  : Off
 xVYCC : Off
Detailed SettingsTV
AutoWide
Move   Enter Return
black Adjust 
: Off 
►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
0
Adjust Return
Gamma
1
Move Adjust Return
▲R-Offset▼

BN68-01310A-00Eng_0709.indd   262007-07-20   �� 3:25:52 
						

							
English - 27
Activating My Color Control
This setting can be adjusted to suit your personal preferences. When usi\
ng the My Color Control Feature, the current picture remains in movement.
15.	Press the ENTER button to select “My Color Control”.
16.	Press the ▲ or ▼ button to select “Pink”, “Green”, “Blue”, “White” or “Reset”.  
    Press the ENTER button.
17.	Press the ◄ or ► button to decrease or increase the value of a particular item.   
    Press the ENTER button.
 Pink: Darkens or lightens the pink color  Green: Darkens or lightens the green color  blue: Darkens or lightens the blue color  White: Darkens or lightens the white color  Reset: The previously adjusted colors will be reset to the factory defaults.
   Changing the adjustment value will refresh the adjusted screen.
Activating Edge Enhancement
You can emphasize object boundaries in the picture.
18.	Press the ▲ or ▼ button to select “Edge Enhancement”, then press the     ENTER button.
19.	Press the ▲ or ▼ button to select “Off” or “On”.  
    Press the ENTER button.
   
Move    Enter Return
Pink 
 1
Green   1
blue   1
White   1
Reset   
 
My Color ControlTV
Move   Enter Return
black Adjust 
: Off 
►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
Move   Enter Return
black adjust 
: Off
Dynamic Contrast  : Off
Gamma 
: 0Color Space   : Auto
White balance   
My Color Control   
Edge Enhancement  : Off
 xVYCC : Off ►
Detailed SettingsTV
OffOn
Activating xVYCC 
Setting the xvYCC mode to On increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.
20.	Press the ▲ or ▼ button to select “xVYCC”, then press the ENTER button.
21.	Press the ▲ or ▼ button to select “Off” or “On”.  
    Press the ENTER button.
    Press the  ExIT
 button to exit.
    Only available in "HDMI" and "Component" on "Movie" option. 
    If xvYCC function is active, PIP cannot be selected.
Move    Enter Return
black Adjust 
: Off
Dynamic Contrast  : Off
Gamma 
: 0Color Space   : Auto
White balance   
My Color Control   
Edge Enhancement  : Off
 xVYCC : Off ►
Detailed SettingsTV
OffOn
black adjust  : Off ►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
Move   Enter Return
black Adjust  : Off ►
Dynamic Contrast  : Off ►
Gamma  : 0 ►Color Space  : Auto ►
White balance   ►
My Color Control   ►
Edge Enhancement  : Off ► xVYCC : Off ►
Detailed SettingsTV
Move   Enter Return
1▲Pink▼Move Adjust Return

BN68-01310A-00Eng_0709.indd   272007-07-20   �� 3:25:53 
						

							
English - 28
Occasionally, you may want to change the size of the image on your screen.  Your TV comes with six screen size options, each designed to work best with specific types of video input.  Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
1.	Press the MENU button to display the menu.  Press the ENTER button, to select “Picture”.
2.	Press the ▲ or ▼ button to select "Size", then press the ENTER button.
	
3.	Press the ▲ or ▼ button to select the screen format you want. 
  Press the ENTER button. 
  Press the  ExIT 
button to exit.
• 16: : Sets the picture to 16:9 wide mode. • Zoom1 : Magnifies the size of the picture on the screen. • Zoom2 :Magnifies the size of the picture more than “Zoom1”. • Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen. • 4: : Sets the picture to 4:3 normal mode. • Just Scan :  Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component (720p/1080i/1080p) or DTV (1080i) signals are input.
  Alternately, you can press the P.SIZE button on the remote control repeatedly to  
  change the picture size.
 If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image  
    may be burned onto the screen. View the TV in 16:9 mode as much as possible.
 HD (High Definition) 
    16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
16:Sets the picture to 16:9 wide mode.Zoom1The screen size when Wide screen is vertically enlarged.
Zoom2
  The screen size when the Zoom1 
screen is vertically enlarged.
 
Wide FitEnlarges the aspect ratio of the  picture to fit the entire screen.
4:Sets the picture to 4:3 normal mode.
Just Scan
  Use the function to see the full 
image without any cutoff when HDMI(720p/1080i/1080p),  Component (720p/1080i/1080p) or DTV (1080i) signals are input.
 • In TV, VIDEO, S-VIDEO and all COMPONENT (480i, 480p) modes, all screen modes can be selected.  
        (16:9, Zoom1, Zoom2, 4:3). 
   • You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV(1080i), Component (720p, 1080i, 1080p) or  
    HDMI (720p, 1080i, 1080P) mode. 
   • In PC modes, only 16:9 & 4:3 modes can be selected. 
   • You must select Zoom with P.SIZE button on the remote if you want to move the Zoom 1 or 2 picture up or down.  •   When watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by  expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not  support all external devices (DVD, VCR etc.). •  When Double (  ,  ) mode has been set in PIP, the Picture Size cannot be set.
Changing the Screen Size
Move    Enter Return
16 : 
Zoom1   
►
Zoom2   ►
Wide Fit   ►
4 : 
Just Scan
SizeTV
Move    Enter Return
▲More
Color Tone  : Cool1 ►
Detailed Settings  ►
Size  : 16 :  ►
Digital NR  : Auto ►
Active Color  : On ►
DNle : On ►▼More
PictureTV

BN68-01310A-00Eng_0709.indd   282007-07-20   �� 3:25:54