Samsung LCD TV 530 User Manual

English - 
Using the Energy Saving Feature
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the 
"Energy Saving “ mode option to “High” to reduce eye fatigue as\
 well as power consumption.
1.
   Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select “Setup”, then press the  ENTER  button.
2.   Press the ▲ or ▼ button to select “Energy Saving”, then press the  
ENTER  button. Select the required option...

English - 60
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG 
(726-7864) to receive information about downloading upgrades and using\
 a USB drive. Upgrades will be possible by 
connecting a USB drive to the USB port located on your TV. 
1.
   Insert a USB drive containing the firmware upgrade into the SERVICE port on the rear of the TV.
2.
    Press the MENU button to display the menu.  
Press the ▲ or ▼...

English - 61
What is Anynet+
?
Anynet +
 is a function that enables you to control all connected Samsung devices\
 that support Anynet +
 with your Samsung 
TV’s remote.
About Anynet +
Connecting Anynet +
 Devices
The Anynet +
 system can be used only with Samsung devices that have the Anynet +
 feature. To be sure your Samsung 
device has this feature, check if there is an Anynet +
 logo on it.
To connect to a TV
TVAnynet +
 Device 1 Anynet +
 Device 2 Anynet +
 Device 
HDMI 1. Cable HDMI...

English - 62
Setting Up Anynet+
 
The following settings help set the Anynet +
 functions.
To use the Anynet+ Function, Anynet +
 (HDMI-CEC) must be set to On
1.
   Press the MENU button. Press the ▲ or ▼ button to select “Application”, 
then press the ENTER  button.
2.   Press the ▲ or ▼ button to select “Anynet +
 (HDMI-CEC)”, then press the 
ENTER  button.
3. Press the ENTER  button to select “Anynet+  (HDMI-CEC)”.
4.
  Press the ▲ or ▼ button to select “On”, then press the ENTER  button.
The “Anynet...

English - 6
Anynet+
 Menu
The Anynet +
 menu changes depending on the type and status of the Anynet +
 devices connected to the TV.
Anynet +
 Menu Description
View TV Switches from Anynet+
 to TV broadcast mode.
Device List Displays the Anynet+
 device list.
Record Starts a recording. (This menu works only for a device supporting recor\
ding.) 
Menu on Device Shows the menu of the connected device.   
Example: When a DVD Recorder is connected, the DVD Recorder’s title menu 
appears.
Device Operation...

English - 64
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1.
   Press the TOOLS  button. Press the ▲ or ▼ button to select “Receiver”.
2.
    Press the ◄ or ► button to select to “On”. 
Now you can listen to sound through the receiver.
3.
  Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the Optical IN j\
ack of the...

English - 6
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips 
apply, call Samsung customer service at 1-800-SAMSUNG.
ProblemPossible Solution
Poor picture. Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality. Try another channel.
Adjust the antenna.
No picture or sound. Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna...

English - 66
ProblemPossible Solution
Image is not stable and may appear 
to vibrate when you have a computer 
connected to the PC input. If the setting is not correct, use your computer utility program to chan\
ge the 
display settings.
Your TV supports multiscan display functions within the following 
frequency domain:
Horizontal frequency (kHz) 30~60
Vertical frequency (Hz) 60~75
PC Maximum refresh rate (at 60 Hz) 1920 x 1080
➣
Image is not centered on the screen. Adjust the horizontal and vertical...

English - 67
Installing the Stand
1. Attach your LCD TV to the stand.Two or more people should carry the TV. 
Make sure to distinguish between the front and back of the stand  when attaching it.
To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the 
upper left of right sides of the TV.
2.
  Fasten two screws at position 1 and then fasten two screws at position 2.
Stand the product up and fasten the screws. If you fasten the screws wit\
h the LCD TV...

English - 68
Auto Wall-Mount Adjustment (Sold separately) 
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
TV Rear PanelAuto Wall-Mount
EX-LINK Cable  (Not supplied)
Entering the menu
1.   Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when clicking on 
a direction button while watching your TV, use the menu to display that 
screen. 
Press the MENU button to display...